 Hello, everybody! Watch this video to find out how to recover data from the RAID system of an unnumberable storage device, Oyn Digital Mobius 5, Model 3R5, EB3M. I'll show you several ways of creating a RAID system on this storage device and those how-to-recover files if they were deleted from the properly working disk array and how to do it if the storage device is out of order. Storage devices offered by Oyn Digital are designed with both high performance and reliability in mind. This 5 RAID system is a powerful tool to manage a RAID storage with a range of flexible connectivity options, hotswap support and easy access to hard disks. This device lets you create the following array types RAID 0, RAID 1, RAID 10, RAID 3, J-Bot and RAID 5. Although the RAID technology is the most reliable one, we cannot exclude the possibility to lose some important data. Information can be lost any moment and there may be numerous causes behind such misfortune, including accidental removal, misconfiguration or hardware breakdowns, since all devices fail sooner or later. So if your device doesn't work, the disks are damaged or the RAID system is crashed, you only need a special program capable of retrieving mission-critical data from the hard disks. Within a few minutes, we'll explore how to fix this problem and recover the lost files. To understand how this device works, let's explore how to create a RAID system on it. There are several ways of doing it. For example, you can create an array by using special switches on the back panel of the device or with the device management tool. When the hard disks are installed for the first time, you should run the RAID clear procedure. It configures the disks for use with the mobius storage. At the same time, it is impossible to remove a partition or data from separate disks at your own choice. This procedure erases all the files without exception. On the back panel of the storage device, set the switches to the position clear RAID by turning them down. After that, press and hold the Set button and power on the device. Keep holding the Set button until you hear the second sound signal. As a result, all previous configurations will be deleted and set to the J-Bot mode. After that, set the switches to the required RAID position. In my case, it is RAID fine. Hold down the Set button and power on the device. Keep holding the Set button until the second sound signal. For all these steps, your RAID will be ready to use and all data will be erased from the hard disks. The last step is to open Disk Management and partition the virtual disk. The second method to create a RAID is by using the special administration utility JMMicron HW RAID Manager. Its graphical interface is available in two modes, basic and advanced. A RAID system is available in both modes. To create a RAID, open the tab Advanced RAID configuration, check the box next to the item Create RAID, then select the array level from the list below, look to the right to select the disks which should be included into the RAID, and click Apply to confirm a choice. As a result, you'll see a warning, saying that all data will be erased from the disks. Click Yes to continue. It starts the process of building the RAID, so you'll have to wait a little until it's over. Now, the RAID system is created. Click OK. The last step is to open Disk Management and partition the virtual disk. If you accidentally removed important files from a disk array while the RAID and the storage device are both in good working order, you can easily restore information with the help of a data recovery tool – Hetman Partition Recovery. If the RAID works properly, you don't have to take the hard disks out of the storage device and connect them directly to the PC in order to find the missing files. To restore deleted files, just open the program and scan your disk array. Click on the disk and choose Open. After that, choose the scan type – Fast Scan or Full Analysis. For status, we recommend running a Fast Scan first. It will take less time. If the program failed to identify the lost files, run Full Analysis. To do it, return to the main menu, right-click on the disk and choose Analyze again – Full Analysis. Choose the file system type and uncheck the option for Signature-Based Search. As a tip, we'll make the process go faster. In very complicated scenarios, you can choose to scan the disk with Content Aware Analysis and then click Next. As you can see, in my case, the program has easily found all the files with Fast Scan. And the deleted files are marked with the red cross. Also, you can use the Preview feature to see the file contents. Select Erase Newer to restore and click the Recovery button. Specify where to save the data, choose the disk and folder, click Recovery and finish. And you will find the recovered files in the folder you have chosen. If the storage device breaks down and you can't access the disk array anymore, it can still be rebuilt and the data can be retrieved with the help of a data recovery tool called Hetman RAID Recovery. It supports most popular file systems and RAID types. It will help you recover data after a device breakdown, accidental removal, formatting, misconfiguration or NAS firmware issues. If you lose access to your data stored on a network-attached device as a result of a hardware error, a controller failure or other hardware issues, the data on the disks remains intact and can be handled with specialized data recovery tools. To access the disks, they need to be taken out of the full-test storage device and connected to a computer directly. So, take the disks out of the NAS and connect them to a Windows computer. If your motherboard has less setup ports or power connectors than necessary, you will need additional adapters and expansion cards. Also, you will need a hard drive with a capacity equal or exceeding the amount of information that you are going to recover. You can use external hard disks and other network-attached storage or other storage devices. If the operating system of the computer to which you have connected the disks tells you to initialize or format them, don't do that, because it will make recover a lot more complicated. In my case, the program was unable to automatically rebuild the RAID on this mobius device. The matter is that this NAS model doesn't write RAID technical data to the hard disks. All data is written from the very beginning of the disk starting with the zero byte. Because of this peculiarity, the program cannot identify the information about the disk array, the RAID type, the number of disks it includes, their order, and so on. In this situation, I'll have to rebuild the RAID manually. Start the program and open RAID constructor. Click Next. Select the option for manual mode and click Next again. In the next window, give all the parameters you know. It was a RAID file, so let's give its type. The block order is unknown, so leave the setting Detect automatically and do the same for block size. After that, add the disks that the RAID used to include. The order of the disks is unknown, so choose the option Detect the disk order automatically. After that, click Next to search for possible configurations. Wait until the search is complete. In my case, the program has found several configurations and they differ by the order of disks. Select the most suitable one, uncheck the others, and click Add. The RAID system will appear in the Drive Manager. To start searching for lost files, right-click on the array and choose Open. Select the scan type. We recommend choosing Fast Scan for starters. If the Fast Scan can't find the required files, then go for full analysis. Select the file system and click Next. As you can see, the program has easily found all the information that used to be stored on the disks, including the previously deleted files, which are marked with the red cross. You can use the preview window to see the contents of all files, select the files you want to restore, and click on the Recovery button. Specify whether to save the data, choose Disk and Folder, and click Recovery again. When the operation is over, you will find the data in the folder you have chosen. This way, you can recover data from any RAID system created on this storage device. Following the instructions in this video tutorial, you will be able to recover easily the files which are still there on the hard disks. And that is all for now. Hopefully, this video was useful. Remember to click the Like button and subscribe to our channel. Leave comments to ask questions. Thank you for watching. Good luck.