 Hi, I'm Chuck with Razorback Offroad. Today I'd like to take a moment and tell you a little bit about the gun mount that we've developed for the Polaris Razors. We make this mount in two different colors. We offer it in RBO powder coated orange as you can see right here and we also offer it in powder coated black finish. Some of the things that makes our gun mount very unique and different is the fact that we offer a lot of different mounting holes. So you can take the gun mount, this is included, and it's your choice where you want to bolt it here on to the mount. Let's say you have a gun and you know due to a scope or whatever you want to mount these lower, all you do is loosen these four screws and then you can rotate the mounting plate over. Now you can mount your gun mounts lower. As I mentioned it comes with two of them. Another neat option is you can control the pitch that the gun mount is mounted. You could actually rotate it flat and mount. Let's say you had a pistol or something you wanted to mount here. You know you can rotate it clear over the top. Another neat thing is that you can adjust this back and forth and side to side here and what this does is it gives you lots of options on how you store your weapon in your machine. I also want to point out that we'll be coming out with some drink holders and other amounts that'll adapt to this in the future. We use high quality grips on them. We machine all of this out of this is out of a high strength plastic and then this is solid billet steel. You'll notice we have two adjustment holes here so you can adjust the grab handle the mount in and out but we also machine on this half inch drive spud there so you can take a half inch drive socket, stick it on here and you'll be able to use this as a lug wrench bracket to be able to loosen up the lug nuts on your wheel. Just a nice added feature on it. Now that we've gone over the basics I'm going to go ahead and move into the machine and show you it actually being used. Well as you can see we've got two guns in here. They're real easy to get in and out. I'm going to pull my 10-22 out. It's real easy to get it out the window. Put it back into place. There's these nice little rubber bungees right here that lock around and hold the gun in place. I'm going to go ahead and change out and put a couple different weapons in so you can see how different guns fit inside the machine. Well as you can see we swapped out to some larger guns here and I had to rotate the mount over and bring the gun mounts up a little bit higher. You can also lean it back a little bit further to raise them up even higher but I really wanted you to see here's a full size 870 and we got a Ruger 243 right here with a big Leopold scope on it. So room for it all to fit. Works really nice. Something we're really proud to bring to the UTV industry. My friends have been using these and we're just very thrilled with this product. So I hope to see you out on the trail.