 Well, it's been a couple of days since I was last in this apartment and To be honest with you the project has taken a little bit longer than I anticipated But I didn't want to show you some of the progress that I have made. Oh, yeah That's something we just got down there But anyway, I didn't think you'd be interested in watching us actually cut drywall but as you can see I Did do the cutting up there So that we can run that wire from that breaker panel over to this cabinet Right behind me, and you'll see the ceiling. I've got it cut out as well for the wiring but for the meantime We've been Going ahead and take care of some of the other projects that we had in this unit one of them being quartz countertops Here by the range So then the picture that I'm going to put on the screen We'll show you the old Tall little bar area that was up there that was really useless but That's just one thing we doing here Got the sink put in. It's an undermount sink Got a nice little faucet in here. It's all ready to go We're gonna come in here with a brand new garbage disposal. I went ahead and pulled that old Hood wire that was in there. Now what I'm going to do is Kind of trim this back a little bit Because I need to put a plate over those wires. You can't just cover these up without having a plate on top of that We're not going to use in these wires like I said, we're coming in to this cabinet right here with a box And I'm going to put an outlet right there So as we get that wire run That's the next project that we're going to be doing And that's the next thing I'm going to be showing you Is my progress on running the wire From this breaker panel. Like I said through that two by four and then you can see how the wires go up Into the ceiling right there Well, I'm actually going to be tracing that wire all the way over Just like you can see the wire right there, which is for the range And it's also got wires up there for the outlets in the wall and for switches and stuff like that Which we're not going to mess with any of that It's been a process and it's slow going but we are making some headway got all the doors and everything on the cabinet So we're ready to put that microwave right in that hole right there Pardon me looking up, but I'm looking at the screen trying to make sure I'm pointing in the right spot So that could be a little difficult if you're not looking at it But there's a lot of craziness going on right now in the world and you know, we don't have to participate I think all we need to do is kind of calm down and Take things a little bit slower And appreciate the surroundings that we have around us, you know It's a beautiful day where I'm at right now. I'm at work And life is still going to go on so why not go ahead and appreciate the things that we have around us Be a little bit smart be a little bit understanding be a little bit patient with people And patient with the situation. Let's educate ourselves so that we don't Panic and fear So like I said things are going on. We're we're still chugging along. We're doing Some little projects here around the property, you know, one of the things we do and see that light back here in the behind me That's a old light fixture So we're actually switching that over to An led fixture that's going to be three panels of of leds one in the middle two on each side that kind of adjust up and down So yeah, we'll put these light fixtures up It's outside work. It's a beautiful day So you can see the blue skies and the clouds and The wind is blowing nice. We're about 75 degrees right now. So It's a great day to be outside and doing things. So that's what we're doing. It's supposed to be, you know Get in there and take care of some of those little Tweaks that you want to you've always wanted to do it, but you never had the chance to do it over time Well, now you have time you know install this box In that cabinet I have to feed that wire down to it set it in the box If you've never seen one of these box what this is So this is a box you would use If you were going to put another outlet in say you wanted to install a television on your wall And To keep from having wires drop draped down under the tv on the outside of the wall down to the plug that's Underneath it you'd grab one of these end wall boxes What happens is This you would put cut the hole just like you saw me do there slide get you wire That wherever you're going to run that wire from either from the outlet on the bottom or from something up top You bring your wire into the top of this box And this has got a plastic Like spring loaded you push that wire in it's not coming back out So that kind of locks it in place so you Safety wise And standards of electrical code you're going to meet that So anyway, you'd run your wire in here bring it out the front And then you would slip this in the hole make sure that these little tabs that you see here Folding up or flat down there's one on the top And there's one on the bottom So you would slide this into the wall And then once you get it in the wall flush with these little These little tabs You got a phillips head screwdriver right here that you're going to start tightening up and that brings this tab up And as you tighten that screw This is pulling in And as it's pulling in it's pulling into the back of the sheet rock and that's what locks it in place So like if you Figure my finger is the drywall and you're tightening that screw over there This is going to tighten up against the back side of that drywall And that locks that box in place. It's not going to be able to come out Because you're down here with the drywall edge that you cut and this is the other side of it So these boxes are ingenious for Doing in-wall boxes. You can do it for cable telephone electrical outlets switches if you were going to wire in a switch That's what these boxes are for So that shows you what an in-wall box would be Because you know once they Wire your house and they put drywall on top of those boxes You you can't get to it Those boxes are nailed in from the side And they go all the way through into the stud that it's sitting next to So it's supported Here it goes all the way through into the stud Well once that drywall is up you can't do any of that kind of work So you've got to have an in-wall box That would slip into the drywall hole that you cut and then use these tabs to lock it in place We're going to push a wire in through here once we get it run up into that wall We'll run it out Give us enough slack Slip this back in the hole tighten that screw up to where this box is held in place By these tabs and that way we can plug that microwave in inside of that cabinet Well, thanks for watching be sure to check this next video out And if you would hit that little round icon up there with my cute little face in it That way you can subscribe to the channel and you'll be sure not to miss a thing And as always if you like it give it a thumbs up. I'll see you soon