 Welcome to the Snap. This is the segment where we answer frequently asked questions in a very rapid-fire format, so let's get right into it. In this episode of the Snap, we are going to be discussing what the Omni-Condenser does and how to utilize it. The Omni-Condenser and Mouthpiece Assembly is designed for the user to easily adjust their airflow to their liking. Be sure to leave a small gap between the condenser and the mouthpiece. As you can see, by rotating the mouthpiece counterclockwise, I am causing the tapered end of the condenser to protrude from the stem. When paired with a titanium tip, this will incrementally restrict airflow, which will result in warmer but denser vapor. Turning the mouthpiece clockwise will open up the airflow, resulting in cooler vapor. You can see how far the condenser has been adjusted by looking at the grooves within the mouthpiece. We recommend experimenting with different adjustments so you can find what works best for you. Look for the shortest notch on the mouthpiece and use this notch to more easily repeat these adjustments. Before you set your airflow, rotate clockwise until the shortest notch matches up with the stem indicator. By using the shortest notch as a reference, you can easily tell that you have made a full rotation, like a padlock. Now let's show with usage how this can change your experience. Each example is being used with fresh material and with an Orion to eliminate any other variables. Let's start with the adjustment set to completely open. You will see that the vapor is not super visible, but I am able to take a rather large draw with minimal throat irritation. Our second example is with the airflow set to be the most restrictive. The vapor density is much higher, but I cannot draw as long. Thanks for watching the Snap. Let us know in the comments below your preferred setting for your Omni Condenser. If you found this video helpful, click the subscribe button and give us a like. If you like what you see, make sure that you check out the other videos on our YouTube channel.