(0:02)- What am I getting myself into? (0:23)- Prepping the wall for paint (2:10)- Erica taking her babies out of her room. (2:35)- Tips for not destroying your ceiling when tearing old paint off the wall (4:02)- How to fix dents in your wall before painting (4:21)- Picking out melamine boards and how to properly cut them (no chipping, 60 tooth blade) (5:30)- Let the cutting begin! (7:21)- Time to sand the wall! (180 grit drywall sandpaper) (9:21)- Time to PRIME & Caulk! (9:38)- The pink wall begins! (10:40)- Erica’s stencil work to make the wall look much nicer! (Pearl Paint) (10:57)- Creating a stencil to start fabricating the wall unit (12:16)- Inserting the shelf pins (12:25)- Creating a frame to help stabilize the vertical walls of the unit (13:17)- Erica finishes up her pearl stencil design on the outer wall (13:56)- Had to buy a new OSCILATOR tool to cut the base board better (14:18)- LET THE FABRICATION BEGIN!- Pre drilling / screwing tips! (15:16)- Standing up unit 1 (15:46)- Securing bottom of unit and making sure everything is level vertically (16:50)- Unit 2 Drawers- Planning the building process (17:56)- Erica stopped by to bring me and my Dad some good food! (18:16)- Fabricating unit 2 (22:36)- Securing unit 2 to the wall (23:34)- Building the drawers for unit 2- The BANE of my existence… (27:31)- All units are built, time to get on that TRIM WORK! (32:03)- The frame for the trim work is complete, time to install the new baseboard! (35:06)- CROWN MOLDING- The SECOND BANE of my existence! Haha (35:37)- How to set up your miter saw for the right angles (37:29)- Installing the vertical trim decoration (38:33)- Installing unit 2 desk trim (38:59)- Installing trim on the outer wall of unit 3 (Hiding the wall gap) (40:10)- Erica starts to sand the trim to get ready for paint (40:41)- FINALLY! The unit is being taped and painted! (42:17)- It’s DONE!!!!! Come check it out! (44:58)- Close-ups of the entire unit (45:28)- Erica gives a tour of her fully organized custom closet!