 Hi guys, it's Tom from the Blackstar service team and today I'm going to be showing you how to connect an FS14 to your HD Venue mark through. Step one, let's turn on the amp. Step two, connect the FS14 to the five-way input located on the rear of the amp. Sometimes, you will need to allow the FS14 to configure to your HT. As you can see, the LEDs on the front of the amp are flashing, which indicates that the digital handshake is being completed between the two units. This process can take up to 10 minutes to complete and it's very important that you do not disconnect the footswitch or turn the amp off during this time. Once the LEDs have stopped flashing and the lights have returned to the FS14, this shows that the firmware has been successfully updated and the footswitch is ready to use. I hope this helps guys and we'll see you in the next one.