 What is up everybody? Welcome to Hot Makes. I'm NerdyJ, aka Jim from The Edge of Tech. And phone! There's no one over here, over here. Shannon, let us know between last week and this week that she will no longer be hanging out with us. She has got so much going on, so much on her plate. Some really cool, exciting things coming up for her that she is accepted to do and she just doesn't have a lot of time to put in and she wanted to make sure she could put either a hundred percent into this or you know kind of move on to where she can put a hundred percent in and focus on her goals. So Shannon, we did offer for Shannon to come say hi and goodbye and all that. She couldn't make it tonight. But Shannon, we wish you the best of luck. Thank you so much for hanging out with us pretty much most of this year so far and we've had a ton of fun and we really appreciate everything you do. I cannot wait. You know, we collectively as a community here can't wait to see what you do next. I know behind the scenes you've kind of told us what's going on and we can't wait to see that. So when you're ready to share we'll be watching on your socials. But Shannon, thank you for hanging out. Thank you for being an awesome co-host and we look forward to seeing what is coming. Again, thank you. We miss you and we will miss you and pop in and say hi even if it's in the chats or whatever you got to do. But don't forget us when you're you know big time. With that being said, we're going to hang out with Caleb and Sarah tonight. We're going to have some fun with them. Don't forget everything you see Hot Makes Wise will be a link in the description below and you can check out the Google Doc look for episode 112, 112 to see everything we show tonight in Hot Makes. We have some cool segments. We have a little maker's news, some hot or not, of course. And yeah, if you want to throw out to the Oreo Cookie Fund, whatever you want to call it, there's a link to the PayPal in the description below as well. So feel free to hit that up without further ado. Caleb and Sarah, how are you guys doing? Hey, hey. Hey, how's it going? Good. Good. I know we gave Geary the night off, so it's just going to be us humans tonight. So there's that. We put him on low power mode. He's still playing. We're still expecting him to play sound effects every now and then. But he's literally just been beeping at us, just incest. He just has a lot to say. Yes, for sure. I see some comments. I got my music dad says, Hey, how are we doing? Also death racers. Yes, we're going to talk about death racers tonight. And I'm super pumped about that. But yeah, we're just hanging out tonight. We got a lot of cool stuff going. And also, don't forget, we are kind of everywhere. We're on the Facebooks. We're on the YouTubes. And we're on our Twitch channel. If you're out there on our Twitch channel, hello, and welcome as well. So I don't know if any of us are manning the Twitch to be 100% honest. I don't know how. I'm not going to lie. Yeah, I'm not sure. So we should probably check that out. But Twitch was one of those things that we added as like a we should probably do this, but we don't really know what we're doing. Yeah, definitely not. Right. Tell us how we could get the files to make a death racer. All you have to do is go check out the real Sam Prentis. His channel, he has a video on that. He explains everything, where to get the files and all the good stuff. We could probably find that link to you to that video. We can do that too. And I think he did a video that shows all the stuff, all the cool stuff. Actually, I have one. Mine is still sitting here. So we can check that out. That's the good old death racer. I have the Joel head on mine. So yeah, that was mine. So yeah, death racers, we're gonna talk about that. I just popped the link in the chat, but obviously don't watch that until we're done with the show. Yeah, yeah. Save it for later. Save it for later. I'm amazed that your death racer is still in one piece. It is mostly. Mostly. I'm not going to say the motor's turn anymore, but it is. It's okay. You don't need a motor to turn. That's not an important part. That's just cosmetic. Right. Yeah. This was the Joel head that Sam created for Joel. And I had, you know, I just printed it while we were at Murph Quick. But yeah, we got a lot of really cool stuff today. I think we got some makers news going on. Like I said, we got a hot or not. And I'm pretty pumped about those two things. I got a ton. I pulled a ton of hot makes tonight. You did. You saw some previews probably in the thumbnail and in the little promo for the channel. And I had to pull them up, but I tried my best not to actually like look at them, look at them tonight so that I can be as surprised as everybody else. But I haven't seen any of them and I'm thrilled. Every time we bring something on, I know I do what it is, but I'm always like, that's so cool. Nice. Someone asked me how the lightsaber dubbed out, how's the lightsaber build? I'll show you if you give me a second. I'll go grab it in a minute. Also, some of astute viewers might remember this from last week. This is my new Snape wand. I may or may have not almost started my hair on fire last week by like pointing it and doing the things with it. It's all my hairspray. Yeah. There's no hairspray. But this is what it does. Dude, you're, wow. Dude, it's a fireball. Fireball in the studio. Dude, last time it just like had a little spark. Yeah. This time it just shot a fireball across your studio. Yeah, that was definitely a fireball. Hang on. How does that work? It's a fireball. It's magic. Insinuindo or I forgot what it really was. I forgot. I forgot the actual spell, but yeah. But yeah, I could show you the, I could show you the hilt too. Take it away for a second. I'll be right back. What? Oh, it's our turn. Yeah. Your version of taking away. This is what happens when Geary's not here. Yeah. He's putting us on the spot. So we've actually recently been printing something. I play D&D a lot and we recently printed, or found a file for a collapsible, where did it go? Where did you get it? I don't know where it went. I didn't move it. I think I know where it is. Okay. She thinks she knows where it is. She thinks she knows where it is. Oh no, you found it. Collapsible clock tower. Collapsible dice tower. Nice tower. Nice. It comes with, I mean, the lights making it repetitive. If only there was a camera. There we go. You can see that that's the tray. It's got a brick pattern inside. That's awesome. This is a cool guy. Nice. Isn't that awesome? So it prints in five pieces and it has a really cool locking system. So it doesn't just go down on its own. And I'm so excited. This is our most recent print and I love it. Nice. That looks pretty cool. I absolutely love the fates and dice towers. So if you need, you can hook me up with one. I could definitely print one and hook you up. Yeah, absolutely. Anyways, this is how far I got. The video's coming soon. Forget my dice tower. There's a battery in there. Look at that. The board is almost in. It would have been in except for I didn't have something. So you have to watch the video to figure that out. And then spoiler alert. Whoa, we have lights. And the button is super hard to see close here. But the button is a neopixel. The lights are neopixel and it's not programmed at all. But it does things and I got it. It needs to be programmed still. It needs to be all the things that I got to build the blade. Still haven't got that far. There's a little speaker in the bottom. That's how you hear the things. Like, you know, when you shut it off. I'm so jealous. Okay, that's really cool. I'm so jealous. I'm not going to show you. You have to watch the video. That's all I'm going to say because we'll just put it this way. My solder skills are not amazing. And do you have the magic hands? Does that help? Well, you edit my videos and you know how my hands are. They're like this. Man, look at all flap. You used a camera slider and a little gimbal for like three videos and then went back to handheld. So now I just now I just make jokes about it shaky cam. Oh, I used a camera slider on the gimbal and I still shook. So it's like found footage stuff. Yeah, David, that's awesome. Yes, I did. It was a lot of soldering, a lot of really tiny soldering. And you know what? I didn't do that. It worked. It all fired up. The sound was on and the lights came on. That's all that matters. No sparks. I need to button this thing up, close it. So I never have to open it again until I put a battery in it. And then, you know, and then go from there. But I think David Wilson said, wait till Tristan sees that. Yes, he's going to love it. I'm actually thinking about building him on a little one. Let's see. Put those noises in the death racer. As long as you don't have the magic smoke, no magic smoke. Thank God. We need a death racer that has like a tie fighter pot, like cockpit pod in the middle and like wings on it. And it makes this noise. It's going to, I feel like that would get damaged so quickly, even more quickly than his did during that race. I was about to say. That is totally a dig. Yeah. That is a hundred percent. Y'all, you guys should have seen his face. The absolute frustration on everyone's face. Like Sam Francis is having the best time of his life. Like he's had pancakes. He's ready to go. Everyone else is furious. Was his face in the video? I think, because I remember standing there and he just, you should show. By the time he showed up, like half of them were broken already because everybody just got started without waiting for everybody to show up. And then. Oh, and I did like put yours down and 30 seconds later is broken. Oh, no, I wasn't there for the start because I broke it before we started. That's right. That's that's I had to go pit stop it to come back and then. Yeah, he literally had to run about two miles. Like a mile to the table to fix it a mile back. And he comes back. He's out of breath and everybody's like. Yeah, it was awesome. Joel Joel's bow was like in a pile of parts. There was nothing left. It was amazing. That was my favorite. It was amazing. I swear Joel went in the guy around and he held us together with like a band-aid and some chewing gum. Like, no, it was a lot of glue and some screws. It was like 90% glue. Yeah. That stuff works. It works. Well, we had some right. So it was supposed to be an advertisement for glue, but. Right. Well, we was just dumped glue on it and just let it all harden. It might have been better. I got to sit in the chair. So it's cool. Right. Yeah. That was a cool chair. Yeah. Let's put the chair that Jim put together. Yeah, that's true. No. Joel is getting it today. Yeah. It was awesome. Let's see. You think this is my public page where you can read it for free? Oh, the link is in. Oh, here you go. He's talking about the death racers. Oh, gotcha. Boom. Yeah. Check out the post. Don't worry. I got some cool stuff coming. But we got some cool news. I think we should jump into that. And yeah. So how about some makers' news? Let's do it. Makers' news. Yeah. Makers' news. Oh, you're right. It must be some sort of plastic. All right. The first thing I got today, the first thing we got, is the Prusa XL update. This came out on the 5th, so like 10 days ago. You got to move. I want to see that. But we did not do an update yet on this. And I think this definitely deserves a little bit of talking. Let me know in the comments how you feel about this. It's basically kind of an update saying, hey, because of the world, because of parts not coming in, because of shipments not showing up, the XL has delayed pretty far. They barely, I think they may have just got enough to build the 100 test machines they wanted. I know what Murph Joe told us, that he didn't even have enough parts for the 100 test machines that he wants. And it looks like as of this, he probably has those, because it says, I believe it says that they got the parts and they're going to start building those in here. And one of the things is, due to the unavailability of major components, it may take up to six months to fulfill day one pre-orders. So it's going to be a while if you ordered a Prusa XL. Not saying it won't be worth it, but it's definitely going to be a, it's going to be a wait. Maybe next time, maybe this time next year, you guys will start seeing more and more of them out there. I know if they can get the parts, I'm pretty sure as I went through down here, they talked about some really cool upgrades they're doing with the next next shooter. Changing that because of some part issues. And they talked about, let's see, I want to find this hardware updates are going to make it go, the changes are going to be faster, stuff like that. The new segmented heat bed is really cool. So it'll be able to tell in the Prusa slicer where you're going to print and only heat up the part of the bed that's going to be used. So that's really cool. There might be like the panels in portal. Yeah, yeah. Yeah, right, in portal. Yeah, I agree. That's kind of funny. But yeah, it'll only heat up the area where your print is going to be, which is really cool because it'll be able to tell that in Prusa Slicer. I thought that was pretty cool. It's going to save a lot of energy too, just heating up sections instead of the whole thing. And they're working on what? Cool llama. Are there separate build surfaces for each chunk of bed? I don't think so. I think it's going to be one, I don't know this. Maybe someone can answer if they know it, but I think I feel like there would have to be. I think there's one and it'll only heat up the area that's going to be used. Yeah, so you'll still have some heat dissipation out. So it's not like it'll be just that section, but it'll still save some energy. Yeah, it'll save some energy. But what's the point of that? Save energy, so you only have to heat up maybe this part of the bed instead of this or that kind of thing. I think it's a cool idea. I like the idea because. To prevent warping too. And speed up the heat up process. Yeah, exactly. Okay, that makes sense. I wish I could speed up the cool down process because I'm like, I want to touch it. Right, the second it raises off the print, I'm like, let me take it. So we've seen so many printers that have different versions of auto eject mechanisms, but have we seen a printer that has fans next to the bed that kick on after the print is over to just cool the bed down faster? Cool it down? I don't know. I don't know about that. I don't think we've seen that yet. I mean, I did that manually. I don't know. I'm not sure if you want to. It might cause plastic shrinkage, that kind of thing, if you cool it too fast. You don't want shrinkage. Shrinkage is not good. It's one plate with segmented heater pads. That's what I thought. Also, it looks like they're working on the bed mesh leveling and changing a faster tool, testing a faster tool, changing speed from 10 seconds to like three to four seconds. So here's kind of a like drop it in. Let's see if I can show this. Oh, and then go grab that one. It's going to be awesome and fast. I like how you pulled that up and it was the same size. It didn't help at all. I know. I'm sorry. So right here at the very bottom. It's supposed to be XL. Right. At the very bottom, he says we're about to start building a batch of nearly 100 XL 3D printers so the internal beta testing can run at full speed. All the major components from manufacturing should start arriving in the coming weeks, months, and years at this point. We're just or at years at this point, we're just basically waiting for our suppliers to fulfill orders placed in previous months. So they're just about ready to build 100 so they can start, you know, the beta testing can run at full speed. I know he talked about that at Murph. But if you're looking at the XL, it's going to be a while, but it looks like they're doing, you know, some cool stuff behind the scenes. And it'll be a cool machine when it comes out. It'll be, I'm just have to wait for greatness. And I think this is one of those times that waiting really is the investment you need to make. Right. I just want to see those bed panels move individually like the portal panels. So like, maybe if you're printing something small, it will print in that spot and then lower it and then print another spot and lower it. Right. Keep it out of the way. There you go. I tend to take the flex bed off and spin it around so it's cool. I can just imagine. I can imagine like pizza. He's like, you know, some people drop them in the fridge. Yeah. I, you know, I guess I'm very seldomly next to my printer when it stops. So by the time I get to it, usually it's ready to go. But I can definitely sit there and watch it until it's done. Like I start print and like eight hours later, I'm still sitting there watching it. Yeah, I have to remind him how to breathe. Sometimes I'm like, hey, listen. I don't sleep. Right. He doesn't. I love it. Print eat sometimes. The next thing is even when the print fails, I watch there. I sit there and watch it finish the bird's nest just because it's fun. Who doesn't love spaghetti? Yes. Speaking of bird's nest, we have a bird's nest on tonight. Oh, we do. Glass bed. You are right. Yeah, yeah. So the next cool thing in the makers news comes to us. Someone asked for the link earlier to build a death racer. This was posted on the social medias. And this is the wrong link. But here, we'll just play it anyway. I put the wrong one here, but I'm good with this because that means. Are you looking for the one that was spinning? Yeah, I got it. Okay. You ready? Let's see. Yeah. Boom. It's so fast. Now this is over. We're not going to be able to control these things. This is the next generation. This is the pro version where it has brushless motors. And I'm going to tell you, just by looking at this thing, it's going to be ridiculous. Unless you're tripod, then it'll just go as fast as the original ones did. Man. I don't know if he's with us tonight, but I hope so. Out for blood. Right now, man. No, this is going to be awesome. So with the pro version of tripods, yeah, is that what you're saying? The pro version of tripods would move as fast as the normal. Like mine, the original. Yeah. Yeah. Wow. Wow. Did you notice? I didn't notice this until later. Did you notice that tripod's death racer only had one leg on it? It did. And that ended up becoming a problem because it wasn't able to hold itself on the seat. It ended up flopping off and the leg got in the trap. He made dead eye contact with me, and I don't know if he remembers. It sort of going in circles, and then his racer just kind of popped off. We made dead eye contact, and he goes, I love it. I love it. But yeah, I remember acutely. So that's in a cool news thing. The pro is coming. I'm not sure if it's out for sure or not. Oh, here we go. First tests are done. Video out. Oh, yeah. No, he put out a video. That's right. Now I remember. Here. Check this out. Forget your blender. You can put one in here, Jay. It's ridiculous. I wish I had a Tasmanian double sound effect. Yeah, if you had the little stick, if you had the, what do you call, mace on the end of this thing, that would hurt. Oh, man. Oh, man. The battle box thing. You could just like make this a battle box. We need to get Mitch in here to add an iron plow to the front or something. Yes. We need to get Angus back on and talk about the little battle box things that he's making. He's making the little ones. We need to. Yes. Yes. I'll hit him up and we'll see if we can get him in pretty next week or two here. So I'm really wondering about pieces that can clip on the top instead of a racer. If you could make it have it, give it a shell, like a little crab. And it comes at you just. But I wonder what other kind of like writers and what customizations you could put on it to make it just so yours. It could be so cool. I think there could be a ton of cool. Sorry, I'm just open another screen here. There could be a ton of cool like, yeah, different mods. I mean, I'm thinking chainsaw. Yes. Maybe I could throw these wands on the end of the fireballs. Dude, they're 3D printed. Just mount one, just mount a heat gun to the front of one of them. Yeah, it's the worst weapon possible. I'm over here like, I want it to look like a funky little crustacean. And they're like, I want melee. Yeah. Yeah. We don't want Krusty's crab. We want like, you know, David Wilson just a heads up. I filmed a video with something you sent me and it is in editing. So there's that. I like that. I like that idea though, adding props to one of them so that it flies like a drone. Drill bits, someone said. Yes. Yes. Yes. So it lifts up. Drill bits. Yeah. No. So if you're, if you have a really good aim, you can slowly disassemble the other ones on the track. You have to go after tripods. This is the slowest. Oh, dang. We really love you. We say, we talk about you so much as we love you, I promise. You can just set that drill in Perth Gear and you can still go for it. Right. Nothing wrong with Krusty. Nothing wrong with Krusty. It's so good. So we also have a hot or not, but you know what? I'm not going to do that. I'm just going to pull this screen back up. We'll call it makers news because no matter what, this is going to be hot. And this has to do with Polymaker and the death racers. So here you go. If you're looking to, if you're going to Earth with a death racer and you're looking for a filament sponsor, Polymaker is going to hook you up. Yeah. So, so I just saw this and they're probably like, what are you doing? But like, you have to be going to Earth first and show them that you're going to Earth, I think. And then, you know, check this out. Go to the discord, discord.polymaker.com. I can get that in the link. We'll put it in the link of the video. Is that cool? Actually, I'll just post it. I don't know. Joe, I mean it. There you go. Did you pop it in there? Yeah, you did. Look at that. So the thing is, this is pretty awesome. So they sponsored mine original and I printed it out of Polymaker. Even the TPU tracks and everything's printed out of Polymaker. And I really appreciate that. We had a lot of fun at Murph with the death racers. And yours looks good, Jim. Looks like it's a lot of fun to drive. Have you been practicing on it? Well, it would have to, it has to drive for that to happen. So it all looks like a nice firm plastic. What is the tread made out of? I never. It is TPU. I don't know what TPU stands for. But yeah, it's like a rubbery filament. Floppy filament. It's the floppy filament. No, it's just softer. And it's a lot of fun. But if you're going to Urph, you want to build one. Now you have no excuse that you don't have the filament. Just check it out. Go talk to Polymaker. Let's get the biggest Urph battle we can get. I have the time off for Urph. But I have not made any other accommodations yet. So I'm trying to be there. Just got to clear a couple things first. And then we'll go from there. But I'm going to try. I have a question. Yeah. I have a question. Yeah. If I made one with a little screen on the head and a little camera, and I was piloting it remotely from at home because I can't afford to go to Urph the time or the money. To Urph, yeah. The time or the money, yeah. I wonder if I could just do it remotely with a little screen with my face off. Yeah. I'll just let you remote into it or something. Give it extra large. It's like a one-time use. Because when you pop the head off, I lose my remote connection. And I can't pilot it anymore. I don't think this is the best idea I've ever had. It's not the best idea I've ever had. Yeah, I don't know who's going to build mine. But that's why mine broke is because, well, yeah. No, it's super cool. Thank you so much to Polymaker for doing this. And man, it's so cool to see a filament manufacturer like step up like this. We got to get some more skin in the game from other places. And like have like a filament battle with the Murph racers. That would be a lot of fun too. Oh, apparently Greg's Maker Corner has an FPV death racer in the works or something. I could see that. I could see Greg doing that. Definitely I could see Greg doing that. I owe tripod. But yeah. So super cool. I'm super pumped to say that Polymaker's like stepping up big for the community. And I can't wait to see how many are at IRF because it will be amazing if like 50 of these things showed up. It would be a literal like free for all I think. It's very rare that a company that manufactures such a specialty item like 3D printing filament will just say, if you print this one thing, we'll send you some. This is a really great opportunity. Don't quote me. I don't know like if there's conditions you have to like sign your soul over to the W. Your first born or something. They don't want Geminis anymore. They don't want Geminizer B plus what type. It's enough. It might be it might be something as simple as if you're making it. They want you to print the Polymaker like side panels. Maybe. Yeah. So it's advertising technology. So if you're still here, Polymaker, let us know if there's anything like that. I didn't click on the link yet. So I don't know. Gear you to be the IRF. Because they're Discord. So I don't. Most wanted AI. I would check that out. But I don't want to dig through it right now. You can ask them yourself on Polymaker Discord. What's wrong with Geminis? And other Ed, you both know what's wrong with Geminis. Don't even comment me. So good. If you're a Geminis, I guess. There you go. Everybody else is invited. Oh, so they have to print. You can only bring one half of the Geminis. I see what's going on here. They have to print the hot makes side panels to get the free Polymaker finale. I'm just joking. So I would say it would be fun to put hot rod flames on it. But Lulzbot already did that. Yeah. Also, did you notice Lulzbot, because the logo didn't quite work the way they wanted it to, for the side panels? They had hot rod flames on the one side panel. But on the other side, it was reverse. So the flames were going backward. Nice. They intended it for it. Yeah. Well, that's what happens when you spin. We're getting ready for the pro model. That is exactly what happened. Yeah. Yeah. That's awesome. Taffy coincidence. Man. But we got, I don't know. It's going to be awesome to see how many show up. And hopefully a lot of people bring some racers, print some, and get some cool free filament for Polymaker. It printed really, really good. I'm going to tell you. I even printed all on the bamboo, and it printed great through there. Unless you ask Sam. Because Joel's kept falling apart. And that wasn't the filament. That was the beta test and Joel's settings. So tripod season needs to step up the game for this next racer. Is that a joke? Was he making a pun there? Maybe by like? Okay, first up, no. No. I'm not falling into those traps anymore. I'm not getting anything. Like, I'm going to have censorship, like email in like 10 minutes. I'm still waiting to see the tripod, like cosplay or Halloween costume of the leg lamp from Christmas story. Yes. Yes. Yes. He might have already done that. A little pun there, Caleb. Yep. So good. So good. No, what tripod really meant is he's actually going to step up the speed a little. Tripod is single-handedly one of the coolest people we met. Yeah, he is. John was pretty awesome. And I appreciate him spending so much time to build mine. Like I told the story, I was like, can I help? And he's like, yeah, go back over there. He's like, that's how you help. Just get out of here. It's the classic creative brief. It's like it costs this much for you to tell me how it's done or how you want me to do it. And it costs extra if you want to look over my shoulder and tell me how to do it. Right. Well, I couldn't see half the screws that didn't go in. When mine's flopping around like this, I was like, now I know what's going on. Tripod, no. Somebody with like a pointy mustache and like a hat was sneaking in the background and swapped your lube with super glue. Like Joe Spaniel. For making something. That could be taken in a lot of different instances. None of. I love it. I love it. All right, we got a lot of hot makes to get through. I think we should knock some hot makes out. Let's do it. Do this. Let's do it. Hot. So the first one we got is from local maker. I'll ride, I'll ride, I'll ride. I'll ride, I'll ride, I'll ride. Local Maker Michigan. Who's with us today. And I got to say, local maker Michigan and Travis, you guys sent me the most hot makes. Thank you. I appreciate that. Everybody else out there, go tag us. Hashtag hot makes. We want to keep your stuff. Yeah. Third part or third try is a charm. Stream to maker deck while we're printing. This is a 3D plus silver forge red. And it's not printable. So this is a, this is a pretty sweet, is it gargoyle, right? It looks like, yeah. I think it's a gargoyle. Is it flat in the back? Or is it just the way that that looks? It's just, I think it's, I think it's the way the wings come across here. I'll take a look at the 3D model. Yeah, we'll have to look at that. I'm looking at it. I don't think it's like a cup holder or something. Oh, no. It's the first part of the wings. Yeah. Yeah, I think right here. That's what I'm seeing. Yeah. This. That gargoyle kind of thick. That gargoyle got something going on, boy. Hang on. I gotta pull this up. Y'all can look at the files. Hang on. I'm pulling it up. That gargoyle is thicker than a sneaker. This is, what is this? Silver forge red from 3D, 3D, D plus. It looks like that, 3D, D plus. So check that out. What just happened? I'm showing this. Oh, there it is. This is what it looks like. It's so cool. Right. And then boom. Think. Whoa. There's the butt. We like to call that the butt. I love 3D prints that have, they're so cool to look at, but they're so whimsical. I love it. Oh, man. What else we got here? Oh, what just happened? Liz, I have no idea that was crazy. It just refreshed yourself. Taking my makes outside for fun. All printed on Maker Deck. They're Photosmith Dragons. Fixum Dude, Prilotots, and Wexter Mini Akbar. Let's go see here. So there's the little dragon. Irrecollectively. There you go. Some Prilotots. Gotta have your Prilotots next to your Starbucks. Thanks, Liz. I love it. And then the mini Akbar. Yes. So good. Emperor Prilotot. Are the things on the side? Are those like Lego stud size? Yeah. They can put things in. Well, I don't know if they're Lego stud size, but I know that. I mean, I could be printing the right scale. It probably is. I'm not sure. That's awesome. I bet you Fixum Dude could tell us, because he's the one that came up with this. Liz, two questions, because I love that dragon print. If we can go back and look at it real quick. Um, perfect. It looks like wood. And I love that I'm getting that. I was thinking that too. Yeah. Like a very fey feel to it. Yeah. This would be so cool as just a fixture to be outside or somewhere in a more natural setting. Honestly, it might be cool to print it in the Woodfill filament and then stain it. Yeah, that would be so cool. Oh, I did a project a while ago where I printed in the Iron filament. And then I put like a chemical combination where I made it rust like really quickly. It'd be cool to print that in like the Iron filament and rust it up. That would be awesome. Like that. Yeah, metal Iron filament and rust it out. There you go. Something about that organic shape and just it's so cool that you can print that. Yeah. And everybody's digging it too. The Force Dragons are awesome. Can we do a video? The Pro Tots. Any of the, uh, any of the, like the Tots series, check out Fixum Dude's Tots series. We'll call them Tots series. Dude, can we sell your Tots? Yeah, go on. Go on, Tina. Eat your food. Tina! Go on. I need some chapstick. Give me two of your pot. Oh my God. My lips hurt real bad. Moving on. Oh my God. You're just jealous because I sit and talk to hot chicks all day. What is that? Hot babes? I can't remember the line anymore. We need to make like a vote for Pedro style shirt that sits right with the red, uh, customer's leaves. But in the red letters, we just put something like Oreos and water or like Nerdy J's. No, vote for Hot Makes. Vote for Hot Makes. There we go. Yeah, I like that. Give me your Tots. Give me your Tots. Eat your food. You know what, Tina? Go eat your food. What do we got up next? I'm, my lips are real bad. My lips are real bad. I need a black bar though. It's so cool. You're so little. Vote for Peslas. Yes. There we go. All right. What do we got next? This one comes to us from, uh, the Repcords. Um, That guy. Pooch. Pooch here. Yeah. It says, uh, Hey, protopost. Let me try to read this correctly. Question in person. Do you suffer from friction, restriction, and Dusty Arbor Syndrome when 3D printing your favorite cardboard spool? How does he know? There is help. AskPrincipals.com about, I don't know how to say this, Rotel. I'm going to go, we'll go Rotel. After only two applications, you'll be spinning free and clean again. Friction restriction is my new band name. Yeah. But wait. There's more. Act today and you can print these for free. All right. We need this to go like pause and go black and white with a big red X on the screen. Right. So this is, this is what he's talking about here. This is the protopost of spools. You throw in the, uh, whatever he called these, Rototels, I think, I think they're called. Correct me if I'm wrong in the chat there. Rotel. Rotels. Rotels. I don't know. Wasn't that Rotel everybody, even the mayor. Look at that. It's a simple print, but it's extremely helpful. Rotely. Rotely. Rotely. How do you say this? Wasn't that the robot from, the Jetsons? Yes. Can we just say that you're wrong? Yes. Isn't that Friction Restriction Rings? Friction Restriction Rings. Hey. Hey. Hi. Hi. Welcome to Hot Makes where we just say Jim is wrong all the time. Yeah. This is the portion where it's called Jim's Wrong. Jim's Wrong. That's what the teacher should say. That's what the paper should say. Jim's Wrong. Jim. The whole episode. Okay. Um, yeah. Nice work there. Nice work. I love the marketing. Like, hey protopost, do you suffer from friction restriction and dusty arbor syndrome? Like what? Dusty arbor syndrome. Yeah. What does that even, what's it? I hate when my arbor's get dusty. I know. Right? I mean, yeah. That's what you put lotion on them for. Yeah. Where are you getting your lotion for your arbor? Arbor lotion. You might have Walgreens. All right. We're moving on. Chris Travis, single knife stand for my Desert Storm veteran knife. The scales are colored identical to the Southwest Asia service medal I received during Desert Storm. Congratulations. And thank you for your service, by the way. Oh, so this is, okay. So this is like a ceremonial, like, display knife. I love that idea. Look at that. That's pretty sweet. Desert Storm veteran and honor who those who serve. That's super cool. That is super cool. Thank you for sharing with us because again, thank you for your service as well. And yeah, Southwest Asia service medal. I love that somebody finds something that they want to do and they just print it. That's so cool. Thanks, Ed. That's from the cardboard scraping off? Yeah. That's when it goes around. That's Dusty Harbor syndrome. I get it. Because his cardboard is paper. Okay. All right. Putting it together. Very cool. Very cool. I think your dad's here. I'm making fun of you. I know you are. It's okay. I am doing an episode with Caleb. It's about time to pop this bad boy open. Are you going to crack it open? No. I saw your dad here. So I had to bring it. You know what's funny? My Lindsey, my wife and my little guy were here. We were playing trains and she sat down here and she's like, what is in this bag? This is so cute. You have a little Grogu cup? I was like, don't open that. For emergency lonely. Yeah. That's going to be like 50 years from now. I'm going to be like, remember this? I need this now. Right. But Chris Travis. I'm going to be on Oreos, but I feel like they're like the cockroach of food at the same time is like, listen. Is Twinkies? They'll survive. They'll survive. I need my Twinkie. That was Zombieland, right? It was. Yeah. I want my candy back. Andrew, all you have to do is if you're on the Twitters, go tweet it, show everybody, and then do hashtag hot makes, just like you see at the bottom of the screen. And we'll get it on there. That's how. Oh, I guess I got to undo that. There we go. Sorry. And thanks, Mom, for pointing that out. I missed that. Hi, Mom, by the way. Thank you so much for wanting us to show your build. That's so cool. Thank you. Hang on. Wait, wait, wait, wait, wait, wait. Did you say Spakoder? Never mind. Spakoder is more of us. We're moving on. There's a nest. Soften them up with some water. That's not my purpose. These things are really cool. You can control your temperature at home. What? Yeah, what? Yeah, the nest, yeah, the nest thermostats. Yeah, nest thermostats, yeah. You put this right around the thermostat and it controls the temperature. It's crazy. Well, the way it works is you can sit on your couch and you just pull the string and it turns the temperature up and down. This is like when my great grandpa called a stick the remote control. Yeah. You just poke at the TV. Yeah. No. I had to move in picture machine. You just push this. You just push this right over your nest thermostat and then the holes in the nest of this allow the air to come through and optimize the temperature in your room. I need, so Denise, you need to print like a, there's a vase behind you that's in a really shiny blue filament. You need to print like a little blue bird and just stick that in the nest and put that on the shelf. Yes. There would be a door. And this is the FL Sun V 400. She's printing this on. Mine hasn't showed up yet. I'm waiting. I love that she saw this spaghetti like print fail and she went, you know what? I can make that something. So just pull it back up and reprint it. Yes. Nest to nest communication. Absolutely. I just had an interesting idea. Oh boy. What if, what if we made, this has nothing to do with hot mix. So stop me if, but I have an idea. What if we made a, listen, Jared. Listen. All right. What if we made a small, I'll be back. All right. Okay. Hear me out. What if we make a smaller, what? No, don't do it again. What if we made a smaller printer where the input was just like the, the filament input was to scale where, print like extruding out of a 0.5 nozzle would be the equivalent of the smaller printers, 1.5 filament. And you just, you print into the other printer and print like a small thing. Like the, like, okay, never mind. A 0.5 nozzle to 1.5. Yeah. So you take, you take 1.75 filament, you push it into a nozzle, you squirt it out a 0.5, but you squirt it in, but you squirt it straight into a smaller printer that, it's a little extruder can take the 0.5 filament. So you're just, and that's printing something tiny on it. So literally all you're doing is going through your regular printer with your regular filament. So you're saying like, daisy chain the filaments while it's extruding. To a smaller kit. Okay. Yeah. You mean like a, you mean like a palette? Listen, I will say, I feel like there are definitely little bitty printers that can work with regular. I'm pretty sure there was a movie about this. I think, oh boy, the double printer. I can't try to put this so old. Honey, I trucked the kids yet. No, not palette. I never squirted filament before. Printception. We get ready for one. Yes, perception. Yeah. You're proposing a dye shrinks. Yes. Thanks, killer prints. If you, if you squirt filament for longer than four hours, cut your doctor. All right. We're going to keep moving. Nice work Denise. I love the bird nest, by the way. Fail or not, it turned out awesome. And I 100% agree. We should get you a little bird to put in that thing because that would be amazing. All right. Next is another, another Christian. This was an update to last week's. Oh yeah. So this is an update, update to, I'm not sure what David Wilson is saying. He says E.T. Shannon is back. I'm not, I'm not sure what that means, David. What does that mean? I think he meant get Shannon back because Caleb was going off the rails. I love it. Anyways, new addition to, I am, I am echoing, new addition to the Iron Man keyboard. We had, I had to do this one from Chris, another one from Chris because it was a follow up to last week's Iron Man keyboard. He printed a key cap with the Iron Man mask in it, or he got the key cap with an iron mask. I'm guessing he got it. I don't think he printed it. So did he print the mask or the whole thing? Chris, let us know, let us know because I think the rest of the keys he, he bought, I'm pretty sure he is. I'm pretty sure he bought the, the keyboard and put it together. So I'm not sure if this was a key that he made or that he, you know, that he, that he bought, but it looks really cool. I almost had it printed the, the actual mask and then sealed it in resin. Actually, no. You know what I just realized? No. Something I, I didn't realize though. I think that the Lego Iron Man mask. Are you for real? I'm pretty sure. The proportions kind of line up to it. The Lego, Lego maybe it could be, and I see the resin here. So yeah, let us know. I think it is. It is. Oh my God. It absolutely is. It's a little Lego Iron Man mask. That's awesome. And I'm, I'm seeing a bubble in there. Can I, can I see a, a zoom in of that, that key again? Yeah. Yeah. There was a bubble or two in there. So it's resin for sure. It's got to be a resin. Yeah. How cool is it? So the question is, did he make it? I love this glow. Did Chris make it or did he order it? Because now we're all going to go order them. I love that. That is so cool. Yeah. Oh, I love the little, the little Iron Man cable keeper. The cable, the little cable pal. Yeah. Adam, Andrew, you said you finished something cool and you tagged us on, I think you said Instagram. It's been a bane of us for a long time. Well, we don't really get a whole lot of We will find it. We will find it and we will, we will show it. How about that? I'm looking forward. All right. He tagged, he said hashtag hot makes, I think he used on Instagram. So local maker Michigan, another drippy bucket finished. This cap tubes, shining blue looks like denim and I'm not kidding. It's streamed on Maker Deck. This is a pretty cool print here, the drippy bucket. Oh, that's so handy. Yeah. Little bucket, little drippy, drippy bucket. How many pieces does that print in? Is it, is it three pieces per? It's just like, good question. How does that? Good question. He's with us. Let us know in the chat. Somebody needs a vacuum chamber. Evan and Caitlin would also tell you mold release or level it. Make sure it's level. The drippy buckets are awesome. Let us know in the chat how many pieces this prints into. I'm guessing three, just from what I see. I'm guessing three. But there's more down here. I don't know if it's part of it. Andrew, what's your, well, I'm trying to find it. Yes, it's three pieces. Okay. Okay, cool. I love drippy buckets. We probably, we probably shouldn't go in public saying that. I would not admit that. Running down the street. Dripping for longer than four hours. In this, in this environment, it's perfect. Drippy buckets just goes. One piece on a bamboo lab. That's true. You could do it in one piece. Yeah. All right. Next. I'm hoping you felt how cool bamboo is. Anyway. Yeah. I'm waiting for my, my Kickstarter is still coming as well. I'm back in 913 or something like that. So I'm still waiting for mine anxiously. And I'll add it to the other two I have. So I'm going to have a triplets when it actually gets here. Cool cat. How do you make it? Sage. That's a weird little dog I've ever seen. All right. This, this is awesome. Sage says I made a 3D printed camera slider. Here are some highlights from the video. Check this out. Kayla, you might dig this. Absolutely. Yeah. I was excited about this one. Yeah. What? A little polly on there. That's gorgeous. I love that. I love that. Yeah. The motion tracking on the cat. Yeah. That's fantastic. For sure. That's super cool. If you're here, what's your cat's name? Sheer curiosity. All right. Anyone? Yeah. I don't know if they're on with us. Sage, 3D Sage. Let us know. I love your cat. And I love your print. It's so good. I'm just going to like all these real quick. Should I say what's your cat's name? Yes. Nice work, Sage. I think this is super cool. Let us know. I'm not sure if it's out there for files or anything like that. But if you're watching or someone tags them, ask them if the files are available. We'd love to see it. I found it. And this is sweet. Do you want me to just send you a link in the chat? Either that or pull it up. Let's see it. Okay. I'm just going to send you a link in the chat since yours is already up. That's so cool. It's super cool. Next. Sorry, we missed that, Andrew. Yeah, that. I saw this. Alan Pan. Read it. But it was a 3D printing page, so it's my own fault for not realizing it. My mom will love this one. Big fan of snakes. I love how it says, somebody said something about giving a snake's legs back. Yeah. Yes. And I was like, oh, we're going to go. Hurt. I believe it was a girl python. What is happening? You know what's happening. Oh, yeah. It's a tripod. Close your eyes. I. These don't hate me. We really do. I don't even know what to say. Well, she's got her legs back. You can say your welcome. You can say congratulations. It's so good. You can say that's really creepy. It makes the most sense. Like I understand why they did it. There's just something about the tube that feels weird to me. Like, why is it so long? Because snakes are long. I can't remember what it means. It's long. You want to drag. What do you mean? Andrew says it's not a snake. It's a lizard now. Good point. Okay, good point. It's a bionic lizard. There you go. There you go. It's she totally was. She was so chill. I wonder are they piloting it? Or is there some way that they get like her muscle contractions down her? Like down her torso. The snake should pilot it. That would be amazing if the snake piloted. Yes. Lizard mechs doing it for the end of us. It's a lizard mech suit and we're all in danger. My CPU is the neural net processor, a learning computer. I love this more than words. This is amazing. This might be the coolest 3D print we've seen this year. This might go up as the top hot make of the year. I can't think of a cooler print. I can't think of a single reason that you would use your 3D print. It could have been even longer. See this? This is top to your printer usage, people. This is what success looks like. I am so good. This is the pinnacle of your life. When you make robotic snake legs, it's like the guy who made chicken arms. You could ever top that again in your life. If you look further down, I love that somebody made an artist's rendition. Quick doodle. This is stunning. No, no, here we go. Amazing. This is like the video itself is the Mandalorian and then the art after that is the credits. It's so cool. It's so good. Alan, thank you so much for printing this. This is made every Wednesday so much better. Taking a snake for a walk in a short tube would be a drag. You're welcome. Gary, a little late. We need to see this with a leash on it and walking down the sidewalk. What is her name? What is her favorite color? And is it orange? We've got to keep moving. But this is amazing, by the way. All right, what's next? This was really cool. So this was Greg Edwards as an artist. He uses mental canvas to push boundaries of space and time. And I'm just going to pop this bad boy open and give us a little look here. This is so cool. Ridiculous, yeah. Is all of this hand drawn on his... It looks like it, yeah. It sure is. Looks like a Windows tablet of some sort. What program is that? It said mental canvas, but I don't know. Look how... It's just absolutely crazy. That's amazing. I'm looking for the original artist's Instagram account to see if I can find any more information. Yeah, this is definitely their art. Wow. Wow, that's beautiful. So good, though. I mean, I love... My favorite at the end, right here, when he pulls, it's like, well, what do we just see? Now it's just a square. That's awesome. All right. Nice work on that. Love it. What was it? Greg Edwards. Nice work on that. All right. Next, Local Maker Mission Inn. I had to throw it up there. New Maker Deck sign. So we had to throw that out there for our Maker Deck peeps. Yeah. Nice work, Local Maker Michigan. And I love the colors. And I love the design here. This is pretty sweet. Is Local Maker Michigan the one that printed the cards for us at Murph? No, that was Big Geno. But... Big Geno, yeah. Yeah. But Local Maker Michigan was at Murph. The Geary family. Yeah. We love them. So good. All right. Next, Liz B. I love Fat Boy 1271. Sounds like my old AOL handle. I used one of my tulips to look at. I used one of my tulips to look like Gelato, printed live on Maker Deck. Oh, that's so cute. So good. Oh, wow. Yeah. This is cool. You know what? This could be such a cool little planter if you did a little succulent in there and it was like the ice cream. Yeah. Yeah. That's awesome. Is there like a stand that's printed with it to keep it upright or...? I don't know. There's a printables thing here. So we'll have to go check that out. Partically says I thought this was edible. It looks edible. So nice work, Liz. Oh, what am I doing? It's so good. So good. Very pretty. Yeah. And Fatboy1271, nice waffle cone. Good job. David makes stuff. I've uploaded a few more end cap options so you can spiralize the Octet Snap construction kit. Wow, that was a lot of words. This is phenomenal. The Octet truss is a geometric pattern using architectural and structural engineering in the design of lightweight rigid space frames to use span. There's a lot of words. Anyways, you put it together. It does some cool stuff and it is pretty awesome. It looks like it's on Thangs. And then what they did on this, they popped this up. There you go. They popped this up here. Look at that. Oh, wow. So it's like modular. You can assemble it in different ways. That's cool. I would love to see like a little end table. Made out of that framework. That would be cool. Yeah, some kind of support for a surface. The shape in white, the shape design of it in white makes it kind of look like bone, but it's also got the mechanical properties of like cut puzzle pieces. So it's almost like that alien's geiger style like cross between mechanical and organic. And it's so satisfying to look at. I know exactly what you're talking about. I totally agree. That's cool. So check out Thangs. It looks like their own thing. We got to look at this one. There you go. Spiralized Octet Truss Modular Snap Struts. That's cool. I love that. So there you go. Check it out. Find Dave Makes Stuff. And you've got to go check this out because it's pretty dang cool. All right. What do we got next here? Rubbibes. Spotty Dog Paper Animation. Okay. I love these. These, what are they called? They're called cool things. That move. No, no, no. There's a term for it. I'm sure there is. There's somebody in the chat could probably help us. For a while, like the whale went. There was a whale. There was some cool stuff. Yeah. And this is all papercraft? This one looks like it's made out of paper. Yeah. Cut. Yep. That's pretty cool. Yeah. Man, that's driving me nuts. Automaton. There it is. There he goes. Automaton. Automaton. There you go. That would be considered an automaton. Yep. I love it. You remember, you remember you used to do that. What was it called? Will you take the paper and you fold it? Origami. Yeah. Yeah. Take that origami. Check out this. Take that origami. All right. Last but not least, another tag here. Simon, I'm sorry. I cannot say your last name. It's not going to happen. Built a mechanical model of a car out of wood. It's not just pistons moving up and down in a drilled block of wood. The model is a V8 with a working transmission, a differential and a clutch. That is so cool. All out of wood. Here you go. So you got a little key. He starts it. I love it. You can turn on my sound. It sounds awesome. I just turned on your sound. But if you didn't share your screen with sound, it's not playing. I did. Oh, yeah. It's not playing for us. What? Can you hear it? No. I just turned it on and you can't hear it. I love a V engine just like anyone else. But being able to see one that's handcrafted out of wood is just, it hits different. That is so cool. It's so good. It starts up. It runs. You can shift it. That's awesome. I'm going to switch over to mine to see if it'll... We can hear the sound. There you go. Can you guys hear that? Yeah. Wow. Yep. I love how you can hear it revving too. Yeah. When it hits the accelerator. Oh, man. It's so good. Have you been able to test it? Like actually test it driving on its own yet? Or is it in its own stationary? I'm not sure. That's so cool. Simon Snezko will have to let us know. I'm looking at the link that the president... Yeah, yeah. All right. Last but not least, Andrew shared this with us. This is a Gizmo. So cute. Gizmo and Stripe Gremlins. This is phenomenal, by the way. I love the Gremlins. This is what happens when you give me water after midnight. If you don't know that joke, go watch the Gremlins. Because Gizmo is the best. Best Furby ever. I have a question to make. As somebody who loves like 80s pop culture movies that everybody talks about, I haven't seen Gremlins. So we lost another member of the show. Huge Back to the Future fan. You just busted this fan. Never seen Gremlins. You got to watch it tonight now. I will say that. Gremlins. Did they ever actually make a Furby out of Gizmo? Or was that... I don't know about that. But Furbies were... Furies that was terribly similar. I had no time when I was... Um, just get out. Which one came first? Was it Gizmo? Or sorry, was it Gremlins or Furbies that came first? Um, I believe it was Gremlins. Yeah. Gremlins was like 80s. Yeah, early 80s. Furbies were like, yeah. Do not fact check me. Don't do it. Let me believe when I went. This is awesome. This is awesome. That's all I got to say. Very cool. Um, I couldn't... Watch it Christmas. Yeah, I have not. So Chris Mink says, I've not seen E.T. How dare you? E.T. is a very good one. That is a good one. Yeah. Uh, I love how dare you. Don't watch the whole movie. Just the bar room scene. Yeah, that's true too. So nice work there. This print is phenomenal, by the way. Um, I love it. So smooth. So yeah, Furbies were 90s. Yeah, for sure. Absolutely. I remember having one that we took the batteries out of. He was still talking in the hall closet. That was not a favorite dream. My mom remembers that one. Terrible. Oh man, I'm going to get some Furbies and put them in my background now. Have you seen, uh, somebody makes... No. Somebody has made these things where it's like, they take the Furbie and they disassemble it into its individual parts and they make like a shadow box that's like an exploded mechanical view of all the Furbies. Nice. I was thinking about the Furbie centipede thing, but that's another favorite dream. I can't guarantee that's really not. Um, I'm just making sure I'm just checking us. Okay, we're good. So yeah, I don't know, um, the Furbies talk when they don't have batteries in them, but I know I had one and it was annoying. Hours did. Yeah, I'm not going to say they don't. So yeah, they had a Gizmo that talked when it... But it wasn't much of a Furbie. Yeah. Um, I love that. Yeah. Gremlins was a documentary. I didn't know if you knew that, but... That's about to be another favorite dream. Why is it happening again? It was fiction. It was fiction, for sure. All right, guys, we got to get flowing. It is late. I know we're running late and there's other shows coming up, but check us out. Thank you so much for being here. Katelyn and Sarah, thank you for jumping in. We had a lot of fun tonight. And, uh, yeah, Shannon will miss you and we will hopefully see some really cool stuff. So don't stop. Don't stop tagging Hot Makes. We want to see where you're going in the future, for sure. Everybody else, we will see you next week. 6 p.m. Central. Same bad time. Same Furbie channel. Oh, no! That's terrible. Caleb's going to go watch the Gremlins. So we got to, you know, get off the thing here and he's going to make sure that happens. But yeah, everybody else, thank you guys so much for being here. We really appreciate it. Check out. There's more shows tonight. I know there's a bunch of shows after us every, every Monday. So go check them all out. I can't name them all because off the top of my head, but, but have fun with that. And we will see you next week. And I probably have a fun guest for next week too. I don't know about, but I'm not, I'm not sure if it's fun as Caleb and Sarah, but we'll find out. It's impossible. Yeah, yeah. No, I just joking. You guys were a lot of fun. Thank you guys. Anything else from Caleb? You guys want to say anything? No, not really. I'm just excited to be on. I had so much fun being able to look at all the cool hot mixes of everyone. Heck yeah. Usually you're in the background doing cool projects. So yeah, painting and doing all sorts of fun stuff. Yeah, I got something I'll probably end up tagging for next week. There you go. I like it. Does it involve scissors and a snip? No. Bye everybody. Have a great week. See you guys later. Oh, it's getting creepier. Okay, bye. Bye.