 Now one of the ways of checking whether two devices are connected in the same network or not there is something called a command called ping. So, the IP address of this device or this laptop that is connected is 192.1680.101 which we can see here. Now if we open this laptop and go to the command prompt and over here type the command ping 192.168.0.1 which was the IP address of the gateway and hit enter it tells us reply from this bytes this time of returning message and time to live of the packet. Now this determines that this laptop was able to communicate with the gateway and returned with the success which says sent 4 received 4 lost 0. Now if we were to look at this particular device which is also connected in the same network this IP this has the IP address of 100. Now let us try to ping from this device to the laptop. So, we close this go back to command prompt type PING 192.168.0.101 which was the laptop here again we see we are able to ping successfully. Now let us try to ping an address which is not there on network let us say this one 105. So, as soon as we hit enter it takes a while it basically is waiting for the ping to return and until one time out if there is no reply from the device it basically says request timed out that means there is no connection or a successful connection between two devices. So, this is one of the ways you could check if two devices are connected over a network or not. Now let us close this.