 Hello everyone, okay, so right now. I'm building this Ironman helmet Using the pepacora. This one is the mark 5 and the old version of Ironman helmet I don't know why I like this version The latest version is good, but I think I'm going to go back to The old one because it looks pretty cool So I figured out how to put the ear Earpiece over here I've done many research on YouTube Most of the people for if they want to do a fiberglassing of this helmet From the inside they might have they might face a problem a little bit of problem to fiberglass this earpiece Because when they stick it here They can't put the fiberglass from inside, so I figure out how to do that Well, basically you can see I I cut a hole and I merge with Yeah, I merge with this Earpiece section so later on when I do the fiberglass. I won't have any problem with that. Okay, so The final piece is the Right side of the earpiece where which I didn't cut it yet. Here is the layout so this is the Section that I will cut I will cut this round and I'll put it here and Yeah This the hole will will be like this after it will be completed It will be like this so Some of you might Have a problem to fit this helmet in to your head. So The problem is fixed when you cut these things off here So once you've cut it you paste this one on top of it and You're good to go. I Think it's it's really brilliant idea. So basically I'll put a resin first just like any other video in a YouTube channel. I don't know Okay, I'll try it with that resin first now later on. I'll be using fiberglass so Stay tuned Okay, so right now In my hand is The earpiece set you can see there's my ear over here So many people have an issue when try to fit these things on basically they it can't fit because This one is flat. So your ears need some space. So basically If you use if you see here, I make a hole over here. And if I put it here the earpiece you see It fits snugly and it gives your ear some space So that yeah, it will fit your head very very snugly inside and So I'm going to attach this one to this one. So basically, yeah Not like this. My ear is inside here So Stay tuned Okay, um, so I have Yeah, I have covered this one with resin polyester resin basically it is You can say it's Yeah, a little bit Hard than harder than the paper before but still quite flexible you can press it down here okay, so I Put the resin inside and outside so that yeah did It give it the base the base shape of this Iron Man helmet Basically once it becomes sturdy with the resin cover resin coating resin coating. Yeah Or basically the next step is to put the fiberglass in So I'm going to do that Put the fiberglass so you can see the earpiece that I made Yeah, so you got no issue to fiberglass that too It is um, you need to modify it a bit use your own creativity Yeah, so that's how most of it I modified I don't put that Gear tooth to gear teeth whatever Because I don't like it it looks It looks ugly The rest I think it's it's cool and one thing one thing You see most of the helmet in the YouTube they have the The what we call it bone over here Yeah, they got the boat over here, but I modified it just put it this put this thing on the back and I don't attach the bone Over the neck because I'm afraid that my head cannot fit right now. I just test to fit in my head or inside this helmet It fits really really Yeah Just just just fit the size of my head if I put that neck The bone neck over here. I think I cannot fit it my head inside. So I guess Stay tuned for the fiberglass Okay, right now I have Have put the resin on you can see from the inside Put a fiberglass and resin so right it is fully dried and it's quite heavy Yeah, I can't I don't expect it to be heavy, but now it is heavy basically All all goes That's what I wanted So I want to trim this this Access fiberglass this this one is sharp. It's pretty sharp So I don't have any dremel But I got an idea Well, I buy this cheap SC non TV. What do we what do we have here? Yeah, as seen on TV this one is saloon sharp Saloon shaper. Yeah, so this one is to nail. I don't know. It's for girl actually to Manage their nails fingernails whatever Anyway, I just use it modified it a bit to make my own Dremel so I'm basically I use this this one use double a's battery So which mean one double a battery is one point five volt To mean three volt. So right now here. This one is five volt output So I got extra boosts for this Dremel. So yeah, no, it's it was working quite nice You can see Yeah, that's quite cool Sometimes you need to be creative to get something that you don't have You don't want to gain that expensive things so you can buy cheaper one Okay, anyway, um, I Made a mistake before this when do when doing a fiberglass fiberglassing At the end of here, I put the resin without the Catalyst I use polyester resin. So I put polyester resin straight and I forgot to put the catalyst and it's getting wet It's it won't harden. That's my That's my mistake. So I fix that I cover up with the resin that I've mixed with the catalyst and layer it layer it down here and paste the new fiberglass and now it's It's quite sturdy everything is quite good. Yeah so I Need to trim off these edges sharp edges a little bit so that I can wear it Without harming myself. Yeah, so Thing I'll have to doing this. I will paint it down. I don't know if I want to use Bondo I will I'll consider it. So stay tuned Okay, so Just before I go to deal with Bondo I found a little bit of weakness over here over this area well, basically When I do fiberglass from inside this area cannot be filled in with fiberglass So it is narrow and when I press it down, I accidentally press it down. It becomes dented So I fix that dented way by Fixing it back to its original position and what I do is I Make a hole in the middle and I fill it with the resin So when it hardens. Yeah, so this narrow area becomes Sturdy and quite. Yeah quite hard right now. So problem is fixed Basically, I think That's the thing that you need to consider before you go with Bondo and painting. Yeah So I hope this one will help you guys before you do anything Further so I think it is good now to go with Bondo and next is painting So stay tuned Okay, so I Don't have any Bondo. I Can't find it. So in in in Yeah, I replace it with the repair put this stick. I Hope that it will work a normal Because this one is using a mix of epoxy So I guess it will be the same as Bondo. I hope so so I'm going to do that all over the place over here Yeah, so stay tuned for that Okay, so that is the result But actually one stick of this One putty stick is not enough I was able to cover the You know the imperfect area with this putty stick Just enough for the mask section The face section, but not enough to cover the the other part so I get Since I think The appearance is important. So the rest I think It's okay. If I don't use this one if I if I don't Fix it using putty stick. I think Yeah, this part is important for the appearance the rest I think it looks fine So Yes, stay tuned for the next process Okay, so finally it's done here. I just want to leave it painted silver Because I think I like to look I like to see this helmet in a raw color Looks like metallic. Okay. So anyway I'm not really finished to put the Detail lines over here. I think I will use sharpie Okay, so right now. Um, I am making a detail lines over here using a pen normal black pen A this one is Fabric Castle I should be using Sharpie, but I don't have any sharpie marker. So instead I used just a pen I hope that it will work. So this side you can see that I've made The detail lines using the pen and this side is Not yet. So you can you can you can compare between Yeah, it looks cool So wait for the finished Um, finished result Okay, so this is the final result. Um, after putting on the detail lines, you can see there the black lines Uh, but there let's see Yeah on the top and the back You can see the details So, yeah I know that this one is not perfect because you can see the surface of this Ironman helmet is not Um, it's not smooth So this since this is my first time dealing with the fiberglass and bondo. So My mistakes, um, I think the next time I do it, it will be a lot more better than this I hope so. So I think this is the final result of this one I hope you guys enjoyed watching all of my video and please If you like watching my video leave a thumbs up Please, um, leave a like comment and don't forget to subscribe