 Ευχαριστούμε και ευχαριστούμε για να φτιάξω 8. Σήμερα θα φτιάξω 8 χαρδιά χρησιμοποιημένες από την ΑΟΚΟΡΙΙΡΙΙΣ by my favorite things. Λοιπόν πρώτα θα ξεκινήσω με αυτή αυτή η αδερφότητα με όλα αυτά τα μόνσταρες και εσέναντι πήγα ένα από τα μόνσταρες που έχει τα χαρδιά του και αυτό είναι γιατί είχα την ιδέα να δώσει ένα μπάνερο με το σημερινό για να κοινήσω. Μπορείτε να δείτε τι σημαίνω πριν. Εγώ θα ανοιχώ με το σημερινό μου, το μόνστρο μου. Και αυτές οι μόνσταρες μπορούν να είναι αλιέντιες, αν θέλουμε να δείτε. Λοιπόν θα χρησιμοποιήσω ένα αδερφότητα με το σημερινό και αυτήν την ώρα θα ανοιχώ να μιλάω ένα τόπο σαν την κομή μου, για να μπορώ να δημιουργήσω κάποιες σχάδους. Και για ένα μόνστρο υπάρχει ένα σημερινό με μάρες και μάθ που καταφέρει καλύτερα στον μόνστρο. Από τώρα θα ανοίχω έναν ένα τόπο σαν την κομή μου και όπως βλέπω ότι θα χρησιμοποιήσω ένα σανύνο με λόγο αδερφόρηση. Για το σύντιμ για το σημερινό είχα με αυτού από το ίδιο σπιόλος και το μόνστρο πους είναι ο μου καθέτυρης χείονας. Και όπως βλέπω εγγιονομιώ también λείξω ένα σημερινό. Και τότε θα το χρησιμοποιήσω ένα σημερινό με αδερφόρηση και όλα Τ 할�μοχαία του σύντιμό μου. year 6 which is going to allow me to create kind of a shadow and an opra e look on the sentiment. I use the matching dyes to cut out the monster, and now from the happy honing stump set I'm going to scampe the little planet and then I'm going to use a matching whisk to cut it out I used my alcohol markers to color my planet and I'm planning to put the monster on top of the planet to create a little scene. Λοιπόν, αυτή τη στιγμή θα δημιουργήσω το μοναστροφόρο στην αιλία, πιστεύω. Και να δημιουργήσω τα αιλικά στον παγγράφιο μου. Είμαι χρησιμοποιώντας κάποια ακρήλικα παγγράφια που έχω δημιουργήσει με νερό. Έχω χρησιμοποιηθεί ένα σπλάσσο να δημιουργήσω τα σπλάσσια μου. Όπως μπορείτε να δείτε εδώ, είναι καλύτερο και σύστη. Και τώρα που είναι σύστης, μπορώ να μπορώ να προσπαθώ και να δημιουργήσω όλα. Έχω δημιουργήσει κάποια ακρήλικα παγγγράφια να δημιουργήσω κάποια σπλάσσια. Και τώρα, όπως μπορείτε να δείτε, θα δημιουργήσω το μοναστροφόρο στον παγγράφιο μου. Και τώρα θα δημιουργήσω το μοναστροφόρο με ένα σύστημα, όπως αν είναι κοινό. Είμαι also going to use my scissors to cut off the excess paper from the planet. Και τώρα θα δημιουργήσω κάποια σπλάσσια και θα δημιουργήσω my tiny little stars in different areas, totally random, all over my background. Now to stick my stars, as you can see, I'm using this little pen. This is a wax pen and it's one of those that nail artists use to stick those gems on your nails. It's totally inexpensive and it does a job beautifully. You can find it on Amazon if you look for that. Now I am going to finish off with all the stars and I'm going to stick that on top of a top folding card in black. And here is a close up look. Now let's move on to the second card for today and this time I'm using the Flamazing stamp set which is just adorable. As you can see I'm stamping a flamingo with light pink and his wing and I'm going to stamp a couple of times just to make sure that I have a good impression and then I'm going to move on to a darker shade of pink. I'm going to touch up the wing only at the bottom. Again I'm creating my shadows there, quick and easy and I'm going to do the exact same thing for my flamingo. So this way the flamingo doesn't look too flat although I didn't spend too much time coloring anything. I just love those solid stamps because they are great for quick and easy cards. So now I'm going to use the matching dies to cut it out and once that's done then I'm going to stamp the legs and the beak. So now my flamingo is ready. I used the tiniest of the flowers included in the kit. I have first cut it out and then I'm using my stamp with different shades of the pink that I used for the flamingo and stamping some of the flowers. I'm not going for the perfect impression there. As you can see I'm going super quickly. I don't try to line up everything and I'm just going to use three of those flowers so I'm going to pick the ones that look the best. And for the center of the flowers I'm just adding a dot using the ink pad that I used for the beak of my flamingo. So my flowers are ready now and now I will go ahead and do the leaves. So I'm going to use this beautiful die. This is a must have. I just love it. Maybe it's my favorite from the whole release. I'm going to quickly pick two of those leaves and I'm going to cut them out using a green cardstock and now I'm working on a piece of white scrap paper there. I'm just covering it up with double-sided tape and then I'm going to peel off the backing and I'm going to cover up the whole piece with glitter. So the glitter that I'm going to use is by Nouveau. You will find links down below. It's a very fine glitter but it's going to stick beautifully on top of this and it's not going to go anywhere if you rub it. So this is where I'm going to peel off the backing. So everything is super sticky now and I'm going to bring in my favorite glitter there. I'm going to apply it. Make sure that you rub it with your fingers or with a bone folder to make sure that the glitter is nicely stuck there and you are good to go. You have created your own glitter cardstock. So now finally I have all my pieces ready to go all the little elements that will make my card and first I'm going to stamp the sentiment. For my sentiment I combined two of the sentiments from the stamp set so it reads Hello gorgeous, have a fabulous day. Now as you can see at the back I'm going to add some foam tape and I'm not going for a shaker card I just want to have a nice window there. I'm going to stick my panel on top of a pale pink card base and as you can see I'm going for a very pale pink colored card today so the sentiment, the cardstock as well as the ink of my flamingo matched perfectly together. I'm placing the flamingo coming out from the window and I used some foam tape at the back and now I'm going to surround my window with some of these leaves. To stick them down I'm going to use my Nouveau Deluxe glue and after sticking everything down I'm going to add the flowers where those branches meet. I just love the elegance of this card I think that depending on the sentiment that you stamp below it's going to be perfect for any occasion especially since flamingos are trending these days so the final touch is to add the little wing on top of my flamingo this is going to add a little bit of dimension on my card and the card is finished and now let's move on to a really fun card for this card I have stamped and cut out all the little guys from the Fabulous Friends and I'm going to use my alcohol markers to color everything. I'm not going to do any crazy coloring after all these are very tiny little images I'm just going to use a couple of colors for each image and since this is going to be a halloween card I'm staying with halloween colors so oranges, greens, purple and black now everything is ready to go I'm going to create my background for that I'm going to work directly on top of my card base which is made out of dark blue and I'm going over it with my distress oxide things just because I want to blend a little bit of color on top of that which is going to make my background look more interesting and not as plain and flat as it is at the moment so as you can see I am mixing up three different colors and that's faded jeans, seedless preserves and black suit and finally I'm going to spray some water which is going to create that oxide look on the top of my card so I'm going to leave the water for a bit to minimize my ink and then I'm going to blot off all the excess water with a towel now I have used this frame which is from the latest release and I really love it, I have cut it out of black cardstock as you can see which is quite thick so it does give a little bit of dimension on top of the background and on one of those little windows I'm going to stamp the sentiment for that I'm going with a sentiment from the same stamp set that says ghostly greetings and I am stamping it with VersaMarking and I'm going to apply some white embossing powder and then heat set it now my main card is ready, I do have my frame I have my sentiment and my beautiful background and all I have to do is to stick all those little guys in coming out from different angles all over the place so I'm going to add some tape adhesive and I'm going to try and stick them all around, at this stage I don't know how many of these I am going to use but in any case if I have a few leftovers which I will have I'm going to just stick them at the inside of my card which is going to give a nice finish look and I really love this frame since it gives a place to add all those tiny little images that you might have from different stamp sets For the next card I stamped the little girl from this month's release I am going to cut her out with the matching die and I have used my alcohol markers to color everything and as you can see I used this pitch bubble now I'm working a little bit on the background so for that I'm going to use this rubber stamp and one of the dies from the mod rectangle shapes so I have cut out this beautiful shape out of cardstock that matches perfectly the pants of my girl now I'm going to ink up a part of my rubber stamp and then I'm going to place my little shape there so I do end up having a little pattern and it's not as plain as it was before but at the same time I made sure that the ink wasn't very vibrant so I keep the background quite subtle, I'm adding some foam tape back and I'm going to stick it on top of my card base and that's just the standard card that's 4.25x5.5 I am going to stick here on one side of this shape I'm going to add the sentiment that says I'm only a phone call away and I think this card is really gorgeous in its simplicity perfect for a friend For the next card I'm going to use this die set the rectangular window and frame and I'm going to cut out a window at the center of this panel so I'm going to run it through my big shirt machine and now this window fits perfectly inside one of the plastic pouches that my favorite things has available so I'm going to go all around the back of my window to add some tape adhesive and then I'm going to place the window on top and then I'm going to add my shaker mix so these are nice thick plastic stars in different colors and I'm cutting a piece of this pattern paper which is going to be the backing for my window and always make sure that you are not shy on glue since you don't want your stars to fall out and as you can see I couldn't help it I just had to give those monsters another go so I have stamped them with different colors of ink and now I'm chopping off the bottom half so that I can place them all around my shaker window At this stage I'm not committing with glue I'm just going to go ahead and cut out everything make sure that I like how everything goes together and then I will go ahead and use my glue so as you can see the pink frame is not stuck down yet so first I'm going to stick down the little monsters and then I'm going to pick out that frame and use my white glue and that snowboard looks by the way and stick it down so the frame as well as the window were cut out using the same die set I'm going to place that there and it fits perfectly all around that window I'm stamping the sentiment with black ink that says sending monster hacks and then I'm going to add some foam tape at the back and stick that on top of my card base and to match the colors of my panel I decided to go with the same color of cardstock as the frame so everything is going to be pale pink and now let's use the second from the smallest dies to cut out four different shapes I used this yellow, tiny white dot pattern paper by my favorite things and I'm going to add some foam tape at the back of all those little mod rectangles just to add some dimension then I'm going to place them on top of my card making sure that I align them correctly I'm not measuring anything I'm just eyeballing it and you can really play around with this design just use different pattern papers or even different colors of plain cardstock it's going to look beautiful either way now I'm going to use some leftovers that I have from a previous card I have cut them out using these dies and that's the card with the flamingo I'm talking about where I have cut out too many of those leaves so it's time to put them into use since I love them so much I'm going to place them on one side I'm going to use some white glue to secure them down and then I'm going to bring in three little flowers, dimensional flowers so there they are they come from this set by Tim Holtz and I'm going to use an alcohol marker to color the centers of my flowers you can really play around with those tiny little flowers just because they are made out of paper you can even spray them color them with your alcohol markers you can do pretty much anything you want with them you see that they are very flexible I can play around with the flower open it up as much as I like or just make it nice and dimensional now I'm going to add some white glue at the back and stick them on top of my card they are not too bulky and I think they really give an elegant touch on my card now I'm going to go ahead and stamp the sentiment I'm using the sentiment that says congrats and you can pretty much stamp anything you like this is a very versatile design it fits on occasion you can leave it as it is nice and plain or you can go ahead and add even more leaves just like I decided to do here on the other side of the flowers and sometimes less is more I think this is a very elegant looking card and it will be great even for a wedding and now I'm going to play around with the written in the stars stamp set and die I am going to pick one of those gold cardstock and I'm going to cut out the word stars as well as those star shapes and for those shapes I used the dies from the previous release the shaker frame and star die along with those pouches these were released last month so I'm going to add some white glue at the back of the star frame I'm going to place a pouch just inside and as a confetti for the inside of my pouch I am going to go with those tiny little stars that I have cut out by using the same stars that were included in the dies as the word stars so I'm going to place them directly on top of my card base I'm adding some white glue at the back and then I'm going to place my pouch directly on top of my card base so this way I'm not going to cut out as I usually do a window instead I'm just going to stick the pouch on top and this way I do have a shaker card so now I'm going to add some white glue at the back of the word stars and place it on top of my card and then there are plenty of different sentiments on the stamp set that go with the word stars so I picked the one that says reach for the so everything reach for the stars and I'm going to stick that on top of my shaker window and let's move on to the last card for today for this time I decided to go with watercoloring so that's why I'm stamping the two animals with my archival ink these come from the wild about you stamp set I'm stamping everything on watercolor paper since I plan to use my Faber-Castell watercolor pencils to do the coloring as you can see I have picked up some of the colors they come in a bunch of colors different colors they are really easy to use all you have to do is to apply the color directly on top of your paper and then just blend it out with a water brush green as you can see and then I will go ahead and do the shadows with the darker green I am going very lightly with a very light touch on top of my paper I'm not pushing the pencil at all I just want to have a very soft touch of color which I am then going to blend with my watercolor brush and you see how beautiful it blends so this is how I colored my little crocodile and I'm going to put it a little bit on fast forward so you can see how I color today's graph now I have cut out a frame using the frame shaker window and frame that I set and I'm not going to create a shaker card here I just wanted to have that frame I'm going to place the inside and for the frame I have used a foam tape at the back so it's a little bit raised but for the inside piece I'm going to place it directly on top of the card and as you can see this is made out of watercolor paper and I have used my blue pencil to add just a touch of color at the background now I'm going to decide where all my focal points will go and I want them to look as if they are coming out of the window so I'm going to chop off a little bit from the bottom just to make sure that my crocodile is nesting nicely there and once I'm happy with that I'm going to add some tape adhesive at the back I'm also going to add some adhesive at the back of my of my giraffe and then place here just behind that crocodile and now that my focal points are ready to go I'm going to do a little bit of work on the background so I have picked two of the words from the stamp set one that says rower and another one that says grrr and I'm going to go ahead and stamp all over the background just to make it look more interesting and not be as plain as it is at the moment at the same time I'm doing second to generation stamping so I get a different shade of my ink at the back and then all that's left to do is to add the sentiment on top and for the sentiment I went with one from the same stamp set of course that says wishing you a wild birthday and that was the last card for today here is a close up look and let's take a quick look on all the cards that I made for today don't forget to leave my comment below and let me know which one is your favorite I think my favorites are the congrats one and definitely the one with the flamingo and these were the cards for today I hope you had fun and got inspired and if you did don't forget to leave my comment as well as give me thumbs up on my youtube channel thank you all so much for watching and for all the lovely comments