 Γεια σας, είναι Vicky εδώ και σήμερα θα κάνω 10 πιο δύσκολες καρδιά χρησιμοποιώντας από την Καρδιά χρησιμοποιώντας by Simon Says Tamp. Όλα τα διζιόνια που βρίσκω σήμερα είναι πολύ σύμφωνα να κάνεις και εύκολα, για να μπορείς να φύγεις αυτό το προσέγγιο σε δύο εξέστημα. Πρώτας, συμβείτες έναν κομμάτι για να παίρνεις το χρησιμοποιώντας. Έχει με αυτήνες απελπίσεις που είναι όλες απελπίσεις. Αυτή είναι ένα στάμπι. Είναι ένα στάμπι by Simon Says Tamp, ένα στάμπι χρησιμοποιώντας. Έχει με δύο εξέστημα εξέστημα και δύο εξέστημα εξέστημα. Υπάρχει also a 6x6 πέπερα πάντα και όλα αυτά τα πέπρα πάντα είναι δύσκολα και έχεις δύσκολα σύμφωνα. Θα χρησιμοποιήσω όλα αυτά τα καρδιά μου σήμερα. Θα φύγω τα σύμφωνα για να μπορείς να δεις τα σύμφωνα. Είναι also with a small ink pad and that's VersaMarking for embossing as well as a gel of glitter embossing powder and there are also 5 different cardstocks that you can use to create 10 different card bases. So to start I am cutting out this pattern paper with one of my rectangle dies and I am just going to stick on top the stickers. For this design I have chosen the stickers with the stacked gifts as well as the wording that says peace and joy. So this is a very simple and quick card. I'm also going to stick some of the stars on my card and it's pretty much finished. All that's left to do is to stick this on top of a card base. Now the card base I'm using is a standard card. I have used the cardstock that was included in the kit and I'm going to stick the panel on top using a foam tip at the back just to add a little bit of dimension. So this is the first card. Let's move on to the card number 2. For the second card I will be using this circle die and I am going to cut out a circle out of this pattern paper and I am going to create a shaker card. So at the back I am adding adhesive to stick this acetate and now at the center I will be using this round sticker. I'm using my grid mat at the back to make sure that this sticker is nicely standard and now I am going to add a lot of foam adhesive at the back so that I can create my shaker window. The silver mix that I am using is by Little Things, loses Little Things and it's called Star Shine and it's a nice mix of sequins as well as little bits and pieces of stars and little hearts and everything. It's really nice. Now I am going to peel off all the adhesive and cover it up with another piece of pattern paper. Now I am adding just a little bit of tape adhesive and I am going to stick it on the card base that I have created from the black cardstock in the kit. So my card is finished. Just if you want to add your message inside you can use white gel pen or you can stick a piece of white cardstock just like I am doing here. So that was card number 2. Let's move on to card number 3. For the third card I will be using this leftover that I have from a previous card and I am going to use my scissors to cut out that little creature. I don't know what exactly this is. I think it's a little bear. So I am going to cut it out and I am also going to cut out all those little presents. We'll be stacking them again on top of a card by using some foam tape at the back. When you are using a card kit like this it's always nice to use all the leftovers that you have from your previous card so you can make the most out of your patent paper. Now I am cutting out the gifts and it's time to create my little scene. I am using this rectangle die and I am going to cut out a piece out of this patent paper and I am also using some white patent cardstock that to cut out this snow bank. I am going to create a scene here so I am going to stick foam tape at the back for my snow bank and I am going to stick it at the very bottom of my patent paper. So now I have a place where I can stick that little creature holding all those gifts and while I am doing that just to let you know that you can find a full list of all the supplies that I am using today just like always below the video in the description area as well as on my blog. So I am sticking the gifts one on top of the other and I am leaving a small gap between them and finally I will be stamping the sentiment which is going to be a sentiment from the stamp set that was included in the kit. For stamping the sentiment I will be using Versafine black ink and I am going with the stamp that says gifts of love. So my card is finished I am adding some tape adhesive at the back and I am going to stick it on top of a card base that I have created with the cardstock that was included in the kit. So let's move on to card number 4. For this card I will be using the circle die and I am going to cut out this piece that says joy and I am also going to use the rectangle die to cut out this nice patent paper. For the circle piece I am using some wing of Stella just to add a little bit of glitter and sparkle on my card and I am going to stick it centered on my patent paper using foam tape at the back and now I will just stick the bird on top of the center circle that says joy to the world and I think it's a beautiful card for peace. Just because the design is so simple to finish off the card I will be adding some sparkle with those sparkling sequins that are self adhesive. I am going to use some tape adhesive at the back to stick this on a standard card base that I have created and my card is finished. So let's move on to the next card. For this card I am going to use the rectangle die and decide which part of this patent paper I want for my card and I am also going to use scraps from previous cards to cut out some triangles with my scissors. I am going to use different colors and the idea is to create some banners for my card. So I am cutting out the blues and the red and any solid color that I can find on these leftovers from the cards. I am also going to use this scrap paper from the previous card and cut out the bottom line that says no picking until Christmas day. This is a VersaMark pen that I will be using. It has two different nibs a thinner and a bigger one. I will be using the bigger one now and all that does is the same thing that a normal VersaMark ink does. It adds some sticky ink wherever you want to. So I am going all over the tree trunks and I do that because I want to use the embossing powder that was included in the kit to add some sparkle on those trees. I am applying the embossing powder and then I am going to heat set it with my heat gun. The embossing powder is quite transparent but at the same time has a lot of sparkling so I hope you I can grab the light so you can see how sparkling those trees are. It actually transforms the pattern paper into a specialty pattern paper with sparkle. So now I will move on and stick this at the bottom and this is going to be the sentiment for this card. I am just using tape adhesive in the bag and I will cut off the word day so it matches perfectly my card. Now I am using my crop-a-dile to add a couple of holes on my card and I am also going to use these eyelets and I am setting them with my crop-a-dile and the idea is to create a banner to stick the thread. I am using a red thread to stick it. I am using this gel medium that I have already added in a fine-tip bottle that does my work really easy and now I am going to stick the thread where that line of gel medium is and I am going to secure this thread at the back with some scotch tape. And just like I said in the beginning today's cards are quick and easy but they make the most out of your of the supplies that you get in this kit. Now I am going to stick all those triangle banners that I have created. I am using some foam tape to add the dimension that I need and my card is pretty much finished. I am using some tape adhesive to stick this panel on top of a black cardstock that I have created and this black cardstock was also included in the kit. So let's move on to the next card. For this card I will be using these two pattern papers. I am going to cut out this nice design from this pattern paper and I am also going to stick it on top of a card base using some tape adhesive so that's directly on the card base. I am using a standard card base that's 4.25x5.5 It is top folding card and the cardstock was also in the kit. Now I have cut out two stripes of paper out of that beautiful pattern paper and I have used some white thread to go around the pattern paper 3 times and then tie a bow. I am using my scissors to cut out the excess and I am going to stick this panel using foam tape on top of my card base on one side. Now I will be doing the exact same thing with the thinner pattern paper on the other side. So I am peeling off the foam tape making sure that all this thread is nicely placed and stick it at the top. Now this is a nice card but I wanted to take it a little bit further so at the other side I have added just a little bit of tape adhesive so that this thread is stuck there and now I am going to use some foam tape and stick it on the other side. This is a nice and simple design that you can use with any cardstock that you have at home to make a quick and easy design Just to add a little bit of sparkle I will finish off the card by adding some wing of Stella clear glitter pen on those triangle trees. So that was the card I am going to move on to card number seven. For this card I am using my paper trimmer and cutting out this pattern paper to be slightly smaller than a standard card so that's five and a quarter by four. And I have a leftover piece from a previous card that I will be using as the focal point on this card and to do so I will be cutting out a snow bank out of white cardstock and I am going to add some tape adhesive and stick it on top of this tiny little pattern paper to create a little scene. Now I will be using the stickers and in the stickers there is this puffy little house. I am going to stick it on top of the snow bank so just to have everything leveled I have added some tape adhesive only on the top of the house. I am also adding the sentiment as well as a few stars and this is where I realized that the focal point was kind of lost on the busy background so I decided to mount it on this piece of cardstock and this is probably the only cardstock that I have used that wasn't included in the kit because I had used up all this color for my card bases but I happened to have the exact same color on my stars. I am using a tape adhesive at the back and I am going to stick it at the center of my card base leaving a nice border all around. This is where I decided that I want to stick that puffy tree on my scene so don't be afraid to cut off parts of the stickers that you already have and make them match your card. I am going to place it just behind the snow bank so I am kind of moving the stars and my card is ready So let's move on to the next card. For this card I will be using these two pattern papers that I have left over from previous cards and I am going to use my scissors and follow the pattern making a nice design on the edge so I am trying to make what I have left into something interesting so that the card is not too simple and I am taking advantage of the pattern that I already have on this piece of pattern paper. As I move on the last cards I don't have so many supplies on the kit and I am trying to make all the cards using as less of supplies as I can from my main stash so all I have added on these cards are a few dies that I already have and pretty much everything else is from the kit. The red pattern paper is glued directly on the card base while this pattern paper is lightly raised by using some foam tape at the back so this way you can see better the design that I have made with my scissors. To finish off the card I am using some stickers that say do not open until 25th of December and the card is ready so let's move on to card number nine For this card I am going to create a super simple scene I am using this leftover pattern paper which is going to be the sky for this scene and for the bottom of the card I will be using some white cardstock to create a snow bank. For the snow bank I am using some foam adhesive at the back to add a little bit of dimension and by the way the foam adhesive that I am using is not too thick so it doesn't add too much bulk on the card and you can easily send it with a standard envelope I am going to stick that deer on the snow bank and this is the card pretty much finished I am just going to add some sparkle with those self-adhesive sequins that were already in the kit and for the sentiment I am going with this sticker that says oh dear so that's card number nine and let's move on to card number 10 which is the last one for today I am going to use this circle die and cut off a piece out of this pattern paper and again I am creating a shaker card I am using some tape adhesive at the back to stick a piece of acetate and then I will go ahead and add some foam tape to create my window for the inside I am using again the same mix that I have used for one of the previous cards this is by Lucy's Little Things and you can find a link to this mix just down below and this is where I am using again that piece of cardstock that I have added from my stash and to finish off the card I have just used two more stickers a little gift and that Christmas saying so here are all the cards that I made for today I hope I gave you enough ideas so you can use up the most out of your card kits with a simple and easy designs it doesn't have to be complicated and let's take a look at what I have left over only three stickers lots and lots of sparkle many scraps and only one full pattern paper so this is where the cards for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me a thumbs up on my youtube channel here are some close up photos of the cards for more inspiration here are two more Christmas cards that I made which are much more complicated than the ones that I shared today click on any of the videos to watch it or you can find the links just below in the description area and don't forget to hit the subscribe button if you haven't done so already because this is the way to tell me that you love my videos and you want to see more thank you all for watching