 Don't you guys hate this? I want you to stay tuned. Okay guys, what's going on here? Put this in here. Sometimes it works What a fail past few times it wouldn't work at all. You had to fiddle with it to get it to There it'll jam up Just like that. So what's going on is this key See the ridges here the teeth are almost non-existent. Here is a new key. Yeah big the Dammit the teeth are and These are worn down to almost nubs So we're going to put this new Lock cylinder in it. All right What we're going to do first now if If if you can't get your key to turn at all You're more than likely going to have to get a slide hammer and yank that out there because This is a little tab on top of here a little tab You have to turn the key in a certain position Right there for that tab to come down and see you can push the tab in It's actually going to go like this. I think it's gonna be on the bottom. Yeah, so you can push that Push that tab up to slide the cylinder out the same way with to push it in So that's why you're gonna need the key for that now Let me show you some things here guys Down under here. Okay. You've got some screws. This has got to come off here. Yeah, sorry This's got to come off here. So you're gonna have 10 millimeter screws You're gonna have one right above your emergency brake handle. This is a 2003 2004 Toyota Tacoma You're gonna have a 10 millimeter there. This is what they're gonna look like just a 10 millimeter bolt So you're gonna have one up here One down here Don't have one up in here You're gonna have one down here Up here is gonna be a little Phillips Little Phillips had screw why they did that. I don't know but that's what that's gonna be now I've already got these taken out to save a little on time. It's kind of boring So what we're gonna do is we'll want to pull this down And out. Whoops. Sorry Just like that. Okay Now be careful This is your head latch. You got to be careful with that Now up in here. I'm gonna have to take the screw out Okay, and there's one right The screw back there and a screw there looks like you won't have to take out No, maybe not There's the hole. I think I'm looking for right There's a little hole. You'll push something up in there and get this tumbler to come out. So first let's Sorry guys See if this will pop out. Yeah See that'll pop out of there Okay, just like a dust boot. So I think all I'm gonna have to do guys is push that in With a little small screwdriver or a pick or something But first we got to put the key in and it worked and you should be able to get up in that little tiny old right there or yeah, right there You know what, hang on a second. I'm wrong with my lens. Okay, so Let me get a little light on you. There's a little hole right there. See it? You got to push up on Now you're gonna have to turn that key to a certain place Until you can feel that push up. I can't find you guys Okay, there it is Let me show you. See how far up in that goes? Well, maybe not because I'm gonna push that up in and Nice to have a camera man right about now. I'm gonna try to pull this out And now you'll feel it See it coming out and pull your And this thing should slide out. There you go That's what you end up with right there Now check it make sure it looks the same and it does. Whoops. Sorry guys Now this one Remember we've already got it ready to get pushed and go back in So we should just be able to push this there's There's slots right in there. See right there the slot for top slot for the bottom. Okay, so you just line them slots up There you go. All right, once you get them lined up Down here at the bottom See that little a little tab right that little Dot there you got to push it up in With a screwdriver and push in on ignition I'm gonna try to do this one hand or there They say I'll push this up in and right there. It's got to push up in and then push your key All right now Should be getting ready to go there Yeah Give it a little wiggle See you got a little bit up here on top You may have to raise up But let's sit you down here Do the pins. Let me see if I can And now I got a blood pressure cuff Something up here. Just like that push it in till it locks in there you go. I never condition her belt Let's put them on here about a year ago, but She was like you just put them on her last year and I'm like, yeah I know but the belts have like about a hundred Over a hundred and twenty thousand on these belts. I'm like, yeah You can't go by how long something is it's how many miles and so there you go Just like that. I don't know with my left hand And we're good to go Everything works good Good and the steering Never locked on this truck before she's gonna be happy about that But now as you can see It locks. Let's check the other key make sure it works. Like I said the steering never locked She's gonna be happy about that. That's all there is to it now For this to put this back up in there. I already show you guys that I mean it's pretty boring But you just get it up in there just backwards, you know, like I always say just reverse what you did. I Don't know if you can see anything because a little bit Like I said, just be careful of your hood latch cable. It's up in here Over here on this side. There's a couple little tabs tabs right here going in holes That's all you got to do. That's a little crooked, but without a camera man or lady make sure Everything's lined up and your little of course a little tatter there like that once you get your screws in And everything will be held into place. I'm gonna put them screws back in Get this all lined back up the way it's supposed to be. I'm gonna put my little deal back in there So anyway, you get the idea and There you guys go How you change a lock cylinder in a 2003 Toyota Tacoma 2003 2004 I Forget exactly what years but it's Pretty sure it's all the way up to 2004 from 2000. I'm pretty sure about that so But if not, there's little variances, but it's all on the same basis. So there you guys go So thanks for watching and sorry about the movement of the camera But it's kind of hard to do by yourself in a little tiny truck and get everything filmed so I'll try to Get most of that shaky and wobbling this out of it during editing, but you know, hopefully you'll get the idea So there you guys go. Thanks for watching check out monkey 1000s channel, and I'm Shae bear Shae burn 1000 the met the man the legend Shae bear. I'm gone for now guys. Bye. Bye. Thanks for watching