 to improvise some connectors but this is a heavier gauge so we won't have the flex and the bounce with these. Okay here we are we got them up and I'm not a professional I'm not a metalworker for sure. I had some gaps because of the bolts how they fell but it won't affect performance you know you just have a break in the pattern so we're good to go on this it's hot out here I'm gonna tell you even though the sun's down okay looking good we got 12 200 watt panels it's 2400 watts and the next project it's gonna be installing all the equipment take y'all walk around here now we didn't have the kind of bow here that we had on the other one we used a heavier gauge unistrut so it was no need to bring the legs in closer and we were able to span the 10 feet with no problem no bounce no sag and over here I've got some temporary supports put in here which we'll have to come back and set them in concrete maybe not really sure how I'm gonna do that but got the sag out so got the sag out of the frame legs being the ones that go in the ground been 10 feet apart wouldn't have been a problem had we gone with this here and I miscalculated on my metal you know I thought I had enough for everything had to use a smaller piece on this back leg that's okay we'll come back and sandwich another one to it but it's sturdy it's it's in the ground it's concreted in so next we're gonna be installing our equipment and hooking up all of our panels in series so we got those on the top so that the lines of the power connections would be closer to the rear ones and the rear ones are at the bottom as you see okay next thing we're gonna do is put a fence around this after we get kind of squared away with everything else run a fence around it to keep dogs and animals and people from walking into the area I don't want the panels or cause any kind of damage so there we have it they're up and everyone I've talked to said that these should along with the amount of batteries I've gotten the type of batteries I got should absolutely generate more power than I can use you know I hate we have these gaps but like I said you can clearly see the bolts there we had a piece of two struts together same thing up there and this is where our accidentally fell and we thought we had calculated better but it is what it is it'll work it won't affect performance that's for sure alrighty everybody here we are