 What's happening YouTube peeps? Thanks for tuning back in today. We've got the old dirty max back in the shop today We've got a couple little things to go over with it We've got a passenger side door handle to replace and we're gonna be talking trim trim clips all the little stud trim studs and everything that you need for taking the door panels off and All the little hardware that comes with it to be able to replace the trim clips that you need to replace So what we've got going on with the Duramax today is the passenger side handle Every time you pull it. It kind of gets just stuck right there. It doesn't want to go back in So we're gonna be replacing this door handle today So we're gonna show you on what you need to do to take off the door panel here And then we're gonna go over some clips and some trim tools that I used for taking it off The snap-on trim clip remover is the one that I'm used to using it is an ASG D1B There we go That's the one I usually use and then these you can get off of Amazon I'll be sure to put the links down in the description for those as well. They work really well I like this one because it's got more of an angle to the head So it makes it easier in some circumstances on getting it into a little bit tighter places It's got a little bit of a smaller head to it also So then over here at the door panel First off we're gonna take off this little cover We're gonna pull out this little tab right here and then this cover here around the door handle We're gonna pull that one out as well to get to most of the screws that we have so now we're gonna have a Torx bolt right there and then Down in there is gonna be a seven millimeter and Then we're gonna get this door panel off. We're gonna want to take our door lock Indicator off It just pops out There's another seven millimeter right in here and we're gonna take our A pillar trim off up front or right behind the mirror Just pulls off Now we're ready to get our door panel off and disconnect all the electrical connectors Right in here that go to this switch So getting the door panel off. You're just gonna lift it up out Disconnect your connectors from the window switch and now we're gonna be ready to get to our handle So looking at the new handle right here There are gonna be three nuts that hold it in from the back side They're gonna be 10 millimeter nuts So you have one that you're gonna get to with an extension through this hole One you're going to pull this little plug out the side of your door and the nut is right there And then the third one's kind of in a pain in the butt spot You're gonna have to peel back your inner door skin and then you're gonna have to use a 10 millimeter wrench It really sucks to get to unless you want to pull your whole window out and I don't really feel like pulling a whole window out So a 10 millimeter ratchet wrench is gonna be your best friend in this circumstance and also before you get this taken out We're gonna want to take off our lot our manual rod So the rod that goes down to the latch is gonna be right here This this rod it's gonna go into this little hole So and it latches this red little clip down into place So you're gonna want to pry that up and pull the rod out of the hole to get that dislodged Now to get our last 10 millimeter bolt out Need a light because there's no way you can see it anyways operation from inside the door panel go and then We should be able to pull our door handle straight out So there's the bad boy and as you can see It's the actual mechanism here is all gunked up rust it up and Sticks so we're gonna be replacing that one So we got it pushed back up in there and now our door handle No more sticky sticky so Heck yeah that new door handle from Dorman fixed our issue So we get pretty lucky on this one There's not really any kind of door clips that are gonna need to replace because this style door has just the hinge Where it will just go on to the door It's got a slot in place where you just put it in and slide it down into place But I do have another one here in the shop a new Hyundai or newer Hyundai Veloster With some door panels off and we're gonna show some clips and stuff on that one So when we took the panel off this Veloster here as you can see some of our clips They came out pulled up from the panel. They've broken half But this is normal to what happens on most of these interior panels now a lot of guys They're gonna be like, oh, there's four clips left. Let's you know throw it back in there It'll hold no we don't like to do it that way. We need to replace these clips So one of the options that we do have for all these trim panel and clip selections is a company called Nikasen K and I K E S I n they're the ones who sent me a couple of these kits to try out As you can see they come in this nice divided little case here This is gonna be a 730 piece set and this is gonna cover probably 90% of your interior door panel trim pieces kind of style clips a couple of the That sells zip tie to it. Oh, yeah, like I said 730 piece set it also comes with this five-piece trim set All these trim sticks right here Four different styles of that one plus the red handled hard one that we used over on the Duramax Those came in really nice and then they did have all the clips that we're gonna need for our Hyundai over here So to get this whole setup right here. That was only 24 bucks 23.99 something like that over on the Amazon I'm gonna make sure to put the links to these down in the description as well So you guys can have a check out at those and then we have the set for the black Christmas tree style Pushpins those are gonna be for your like inner fenders underbody clips things things like that that kit also comes with the Trim tools as well for the same exact price for a little bit cheaper If you want to just refill it and not have this, you know the fancy casing for 12 bucks You get this fun-sized grad mix bag that you can divide out and have hours of fun all in your own So there's that option for you as well a little bit cheaper a couple of neat options Make sure you guys replace your trim panel clips. Don't let those things go as broken panel pieces That's about all I got for you guys today. Hopefully you guys enjoyed that content here pretty soon I'm gonna be coming up with some more content for the Duramax I've got a couple of parts to be putting on it for some winterizing helping you guys there doing some glow plugs Oil change stuff like that So we're gonna be doing that on the Duramax and I've got a couple of really great tool reviews coming up as well Make sure you stay tuned on that one check me out over on Instagram at Rust Belt mechanic as well as always appreciate it You guys stay awesome