 Hey there YouTube, right I just thought I wanted to share this because guess what I fixed it I'm so proud of myself, and I'll tell you what I did was I Took these out again, and I started measuring I'd gone through components. I decided that maybe it was well Look, I'm not professional at this like you all know that anyway and and I should have probably tested it without those being pressed against those pots, but I noticed a couple of wires hanging off here saying enough and those wires aren't connected up in that Heat sensor here isn't connected. That doesn't matter and What it was was I don't know if you can see Where that big chunky capacitor is just down there there's a resistor and that resistor there and the one just Above it. I really hope you can see it, but that resistor It's this Transistor down here. There's MOSFET. It's just to the right of there There's a little resistor, and it was reading between eight and 12 mega ohms But the color banding on it said it was supposed to be 47 ohms and the one right next to it has got the same color banding And that is No, it was just in front of that transistor That MOSFET down there. There's another resistor and that's got the same color banding and that was coming up 47 ohms So I thought okay, that seems a little bit simple Going listening to the sound remember what the sound is like pop and it almost did sound like it was It was in you know in this sort of area anyway, so what I've done Basically as I've changed the resistor Plugged this in I put a 47 ohm resistor in there. I'm just gonna move that out of the way There anything silly It's what we got there and if I start turning up the older Look at that Look at that. I got my power supply back again whoo current control works I'm not quite sure how sensitive that is or isn't I'll just put that up there and turn that back off a little bit Nick so I'm not turning it down all the way so that seems to be working all right But yeah, oh now it seems at least this is working Let me just stick a meter in here actually and make sure you have actually got an output let's just turn it off and Let me just commit to a meter. Okay, so I've got those connected Turn this baby back on Give it some voltage It's making a bit of a weird noise when it comes to that fan going around but it says 13.2 volts there 13.6 and over there on that meter. It also says 13.7 Which I suppose may not be too far because we don't get to see that could be on 6.9 Couldn't if I just oh look I just twitched that very slightly to 7 and we're still on 7 on the meter over there See that Yeah, I've not tried it the load or anything yet. Maybe I should stick a load onto it I probably won't put my duct recorder on to it. Let's straight away And over on the meter there 31.5 volts and 31.5 volts here day 1.6 We give it that there's a little bit of fluctuation now That's good or bad, but It is definitely a step in the right direction Definitely step in the right direction. I Could be cruel to it now. Couldn't I I could put my My Light bulb load on there, but I think I'm gonna put some a bit gentle on Okay, so I just put this this LED on and See if we can get it to light up a little bit. Okay We're currently in it Don't really want that to shoot up too high. There we go That transforming there He's making Pretty shocking noise 12.4 volts 300 million I'm gonna disconnect that and I know that's is making a bit of a noise and maybe I Need to look into that a little bit more, but there's a barcode on there. So I Did need to replace it or anything. I'm not sure I do but It works. It's we've got I've got an output It was a bit noisy before I must of me used to make a bit of a noise and maybe it's because I got the case off with it on But it would I would prefer it we didn't really make that sort of noise If anybody knows if that's normal or not, I'd be great to know But just at this stage of the game I'm quite happy that I've got Some output on it now, which I didn't have before I Thought this was a gonna be something that I was gonna have to leave for quite a while before I get my head round out Oh, and I fix it But I figured out the other day that I ought to go through a component by component I looked at all the chips and decided That that that was probably not gonna read the problem because I got output and Things working like that. I'm not out but I mean display And that sort of stuff worked But you know, I don't really like playing too much with high voltage side because This is high voltage side So, yeah, so I share that that I've managed to get some life out of that And it may end up being back on there on the bench as a working as a working fast plug So you watched that this far cheers for watching guys, and I Get back to you soon. Bye You