 What is up hot makers? Welcome to hot makes right here on hot makes across the world. I don't know We are on everything tonight. I am nerdy J. Jim from the edge of tech this This is Caleb Caleb. What are you doing here? Shannon is dealing with some airplane Flight problems, so I figured I would jump in last minute just to make sure that we've got some some faces on camera Yes, yes, Shannon on the background we wish you could have been here Shannon I know you were trying to get home from The Californias where from your socials looks like you have an unbelievable time I'm not sure she's gonna try to jump in or not, but if she does I hope she Says hi, I know she she had a flight canceled. Yeah, and she I think she's stuck in the airport right now or something So yeah, if she could jump on she will otherwise. I know she'll try to jump on In the chats if she can too, but we have we have Caleb and I we're gonna rock and roll We have an amazing set of guests a two two guests really Nathan and Melissa from cookie cat and we cannot wait to talk to them about all things cool and in this piece of my hand I'm gonna put this down so I quit playing with it But we have an awesome show if you want to see anything from the show Hot makes wise down below in the comments. There's a link to the Google doc find episode 100 and 10 110 Caleb 110 110 episode when when I hopped on the show to help you guys out. What episode were we on like 40 50? I don't know maybe. Yeah, where were we that far into it? I can't remember it was 20 21 in like December or something wasn't it somewhere somewhere Yeah, it's 110 episodes a lot of episodes my microphone is not happy. I'm back. I'm back in the studio tonight last week I was in the Wyoming's And it's like all discomfort discombobulated because I didn't get here too much early before the stream and I I didn't get here last night when I got home. We got home late And I didn't come and empty my dehumidifiers and they were full and it was humid in here like 66% humidity when I came Which is really good for filming, you know, yeah, you know, that's terrible Absolutely terrible remember that I know we've talked about this the last few weeks in a row But when remember when we were at Murph and it was so like humid out that people were having issues with their filament Yeah, well, it's not only so humid out It was like a pool and that was like what that was 2021 this past year this year was great. Yeah, no water on the floor Packed full of people everybody not everybody with a lot of people took home an extra gift We won't talk about but you know, it was it was a lot of fun But we really do we have a great show tonight If you consider if you want to help join us in donating to the Oreo cookie funder Whatever you want really call it call it what you want It looks like we already had a donation Imagine that from from Andrew. Let's see what he says. I just I want to see his actual Yeah, he's phenomenal. Thank you so much Andrew 10 bucks and I gotta I accidentally I Accidentally swipe the wrong way on my notification So I didn't see what he says because he always has something clever to say and this will be Yeah, yeah, yeah, I got it He said pepperage farm pepperage farms mint Milano funds this time So it's not you know, it's not the Oreo fund now this week It's the pepperage farm mint Milano for not sponsored. What do you do that in? Whatever you want We could I have some water I'm drinking let us know in the chat what you're drinking. I got the bubbler this stuff is Absolutely Addicting let me get my face out. There you go. It's bubbler water The modern naming convention of just removing some vowels. Yeah. Yeah. Yeah, and it's made in Wisconsin here And they they took out its antioxidant sparkling water with caffeine Which I need because after tonight's show I got three film three videos So we're gonna rock and roll with that but I'm drinking sprite everybody's tossing it toss it in there Let let us know what you're drinking Also, we are live across everywhere even though Shannon's not here. We are on your twitch We're taking over Shannon's twitch because she's not here tonight Oh, yeah Should I be should we be streaming on her twitch? Is she's not here? I'm she thinks she's okay She won't ever notice That's okay, and and one more thing Birthday Webster happy birthday Webster. Yeah Earlier a little bit ago. I posted last year's Webster model. I know some people came And started tagging him today and I just got home last night. I did not have time to get the new stuff Printed but I tell you there were some really cool stuff for Webster and Like Carl Fenton. I see A whole bunch of people there was a new diorama made um, I'm trying to remember I actually jumped out of that group and I forgot to copy and paste the What was it? What was made and who made it? um Well, let me just see I'm gonna pull one up real quick for us because it's Webster's birthday and Webster is awesome And we want to make sure we uh, Webster is fantastic. Yeah Um um Go ahead jump in so Yeah, I figured I just take over this talking about how we're on all channels You mentioned that we were on shandons, but we're up to I think 734 is what I saw last time Uh subscribers on the main channel So if you are watching then you enjoy the content that we do Go ahead and click that link in the description It'll take you to a link tree and from there you can go to our youtube channel Make sure you're subscribed and watching on the main channel Um, because we're trying to keep that growing Yeah Yeah, I agree do it There's a lot of people, uh, huh? I was gonna say there's there's a lot of really cool. Um, I'm gonna share my screen right now I just realized I didn't have it shared yet. I was so excited. We were talking we were talking to uh, Nathan and Melissa and I'm not not doing the things I should have been doing Like sharing my screen ahead of the stream, but here we go. Let's see. Here we go. Happy birthday. Wexter. This this one's courtesy of randomize um, I was I got told that today was a Very cool man and designer his name is verdin Is that how you say his name verdin verdin wexter? That's what I call him Uh, this is awesome. It was a a diorama to go with last year's model So if you had I think this was last year's if you had that like it was a kind of a diorama to go with it and correct me Let me know in the chat. Um I think I think Trying to figure out who Who actually modeled it? Um, the model boy Uh, the pool boy is photos meant the diorama is FR3d Okay, okay, so we got that I know like I want to make sure we give everybody the credit so Yeah, uh, thank you for doing that. It's awesome that you guys do that for the community My birthday is September 12th. If you if you want her, um, and uh, no, I'm just But it was an awesome awesome diorama and I didn't get here in time enough to get it printed But happy birthday wexter. I hope you had a great day and I know you tweeted back and said you did so Uh Light light speed says I seriously just discovered maker deck yesterday. I had no clue what it was my cat Loves it. He must have been sleeping under a rock. Everybody knows what maker deck. Okay sleeping under a pooch rock If you yeah the pooch rock No, um, if you haven't seen maker deck check it out Uh, it seems like it's crazy because you're just watching like I don't know printers print or people doing stuff Um, and it is super addicting. I love keeping it up on a screen and just watching it and like checking on stuff periodically Um I just um, I want to point out. I just want to make sure to shout out. Uh, sorry You were showing something. No good Uh, I want to make sure jack in the shop. Uh, got a shout out. Uh, saying I do I'm I'm really looking forward to it. Just a long fruitful marriage together. Thank you so much Yes, yes, uh That um Yeah, uh, we're gonna leave that one alone. Uh, what do we got here? What else on my list here of cool stuffs Happy birthday. Waxter. Oh last week we did crusty's birthday And I was in Wyoming and my post didn't post and I didn't have the picture or the cup with me Um, so I grabbed this quick before the stream. This is actually done in the cookie cad Uh, filament we're gonna talk about this just in a little bit here the top of the tiki face It's supposed to be a taco because it looks like a taco and I'm hungry. Oh, let me let me do this for you Yeah I love it Yeah, this thing was awesome. This was we got the maker deck on there too Um, this was such a cool How you can kind of see if I do this you can kind of see the transition there Very cool transition very cool mug. I love this design and again that was in that that was in the cookie cad Sunset, I always mess that name up with this one if I can block my face You can kind of see it's a transition And we're gonna talk to these guys about this because this filament is awesome They gave it to me at mirf and I've I've had nothing but success printing with it so far and the transitions are awesome Um, what was it? What were they saying? Taco practical printing maker deck kitties, etc. Yeah, love it It was awesome. So I was asking for a link and I was assuming it was for maker deck So I don't I just dropped that in the um Yes, if you want the link for maker deck, there you go. Um Drop a link there you go and there's no link for these I don't think Huh, go ahead. Go ahead. Yeah We're gonna talk over each other a lot. I was gonna say there's no link for this one. I don't think it was a special Oh, I'm sorry anyways I'm excited to talk to cookie cad because I've dipped my toes a little bit in the past I used to work for a nerd themed bakery right um And I've dipped my toes a little bit in the past on making custom Cookie cutters for them, but I went through the absolutely like painstaking process of designing things an illustrator exporting the svg files importing them into tinker cad and like Combining things to try to make what I wanted So talking to them about what they do and how they make that so much easier is exciting to me Well, what do you say we bring them in? Let's bring them in ladies gentlemen, Nathan and Melissa, it's just Nathan right now I was uh, we were watching waiting till you were gone and then we know yeah You mentioned cookie cutter. I'm like I gotta grab some to show Good, how are you? Oh man? It's great. It's been uh a month almost a month since since murph and it's uh It's been a crazy month already. So How about you guys you guys had good month after murph. I know we met you there. So yeah, we had uh, we had a fun drive back Yeah, and then we had it. Yeah, it's a good month. How long was it dry? Uh, how long did it like are you talking like wind chill factor? Like how long did it feel or how long was it? How long was it? It's 11 hours. We drove to new york. Yeah, that's the drive that we had. Yeah I'm down in arkansas. So it was about a 12 hour drive for us And you also had three kids in the back, huh? You had three kids in the back also. Uh, no, but He had a sarah. She's not there Yeah, now we did through the kids in the car and just drove out there I didn't even know what to expect because we hadn't been there before and um, they don't really tell you anything So we showed up and we're like, maybe we'll get a table. Maybe we'll just walk around Yeah, so and then when we got there, we yeah, we got a table and then we it was it was great It was so fun meeting everybody and talking to everybody and it's the first time I've been at a 3d printing thing since you know pre-covid but for us that also means pre Cookie cat The last time I was at anything was as a hobbyist Now I'm very cool part of it All right. Well, and I tell you um, I actually I won't say I'm gonna say how about this How was your mirf experience? That's the let's let's let I don't want to like put anything in your mouth So how did you feel? Did you like it? Did you have fun? Did you see stuff? What was your thoughts? It was amazing. It was it was super fun. I've been to many trade shows. Um, none of them have been fun You know, my background is uh is healthcare software and that's what I did for 16 years and uh You know, so we went to healthcare it shows and healthcare shows and you know, you know and uh process management shows and uh, you know, they're very uh, you know, we're You can't wear shorts Yeah, they're boring and people are not there to have a good time and interact and You know, so cookie cookie cat is from uh from new york Yes, that's awesome. That is awesome. So my theory or somewhere else. We're a little bit north of new york city That's awesome. Well, we met we met it. Uh mirf. I know It was crazy. Like talking to everybody doing the death racer stuff. I was I mean filming We were everywhere and I know I talked to you guys briefly and I said I got a bad idea Why don't we talk on hot makes because that's gonna, you know, go further into the community than just talking You know at mirf and then we can actually talk about what you guys have and you gave me the sweet role of sunset filming Um, and this is the cookie cad. Uh, I think I showed it a little bit ago, but cookie cad sunset It's a sweet transition role or Um, what do you get? What do you really call this? You guys call it a transition role or do you call it? Yeah, we call those transitions balls. Yeah, cool. And and the colors is just phenomenal I um, I was testing another printer and here's kind of a Really cool transition from You've got a really good transition right there. Yeah, yeah, and I um, I have a couple more prints Actually, I did a really cool unicorn and my little one took it to my wife and I didn't bring it back for today's show But uh, so she she currently has that in the case, but um, I mean Let's talk filmages for a second. You guys, um Have this made for you. Do you guys extrude it? Oh, we don't extrude it. Uh, we every you know every couple weeks. We're like, hmm. Maybe we should get an extruder Uh, but no we don't extrude we get it made. Um The reason we get it made is that when we started, uh Well, you tell it when we started what do you mean? Well, I really liked Specific colors. I was selling cookie cutters And I couldn't find pretty colors I wanted pink and like this pretty man green and every few weeks it would go out of stock And there was only one or two brands that I really liked That also printed nicely. I'm like, I wish I could just have all the colors I want And so we made all the colors I want Nice I love it. This is where we started our first two colors were like mint green and this coral Okay, and then we expanded the line to all these And then I wanted transitions that weren't just the whole rainbow Which is where our transition schools came in to play. So our Unicorn filament. I mean, this is mermaid Love that Unicorn colors So it just does when we came out with these the only real transitions on the market were just rainbow Everybody did a rainbow. There was like 15 colors in each one, you know, I mean, you know eight colors with the mixes And so it was all rainbows and we were like, does it have to be rainbows? So we you know, we have a partner supplier our filament is It's mid in china and we have a partner there and so we're always being like, oh, can we do this? Can we do that? And we're just asking them half the things they do they do only for us Yeah, first they say no and then a week later. He's like, we did this and then we push them and push them and nice We've learned a lot about the process and how it works. And so Um, we're just always we're like, hey, why don't you do this with the machine? And they're like, well, I don't know if that will work Let me ask the engineers and the engineers are like, yes, we'll try it and so So, you know, so the first thing we did is we did these we kind of focused on these like three two To three color transitions only so that you know, and and we're we do a lot of experimenting here on mixes On because you know she Melissa's been doing that forever. Her background is a pastry chef So she does airbrushing and all sorts of color stuff So we will experiment here on the mixes make sure it looks Good because we want to make sure that every color comes out nice even if it's like If you're only getting the transition it shouldn't be muddy ground like every spot in the Filament has to be pretty Oh, it's not like a reusing the transition Parts of the spooling or parts of the extrusion process. It's like you're actually designing it to be a transition roll. Yes That's nice And and I tell you I mean from this rule I only speak from what I've printed so far and it's about a half a roll Of uh that that sunset and every part of it has been awesome I mean like I I printed this little bolt and I mean printer wise it worked really well But you know the color came out really nice Um, I stopped it early because I was I didn't realize it was going to be such a long print But um super super nice on the color. Yeah, I stopped the top. I was like no that's too much. I'm out. Yeah, it looks like it was broken And then you know like this mug this mug came out Super cool, and I just love the transition it you can kind of tell it's light on the top and in on the bottom here And you know, you got the purple in the center. I just I loved how that turned out Um, but it's printed really good And it's cool that you guys are saying like, you know, I kind of want this color in this color. Let's try it Yeah Yeah, we've been playing with uh, we haven't been very happy with how I mean With the trend of these like co-extrusions that have been out there We've tried them out and there's things that we don't really like about them And so where we've been working for months now With our supplier to do something different that nobody's done before Because we're just we don't like uh, they're only silk and they're Um They leave lines Yeah, so we're working on a couple things to fix that it looks like very obvious that there's a shift and We're yeah, we're working on some cool things Oh, we can't wait to see it. Yeah Jack in the shop in the chat was asking what speeds people usually print You're filming and um I don't think that they're uh, that it really matters for the film at PLA So that's really come down to how uh, how much your hot end can push out Well, I tell you the mug moment like it's this mug. Yeah Was was printed on um Well, if you see the banter. Yeah, it it was so it's printed on the the x1 carbon That's not at full speed and So, um, you know You know, it's probably going to push it out at a right, you know, 10 11 millimeter per second cubed and then uh, if you've got uh, volcano or cht nozzle you can do Push that up But it goes down it comes down to your nozzle and your hot end. It doesn't matter. It doesn't matter I almost ask you about a red, white and blue roll There's so many things like that that we've wanted to do that you can't because if you do a red, white and blue roll You get a red pink Yeah, and blue. Yeah, that's true because Definitely working on ways to get all those colors in a spool Definitely in the works Ooh, that would be that would be interesting if you if you could get it So it's not bleeding and and like you said that would be that would be pretty Yeah, I mean you can always use a palette to like because that palette like splices it right Yeah, I actually saw Courtney I saw her on here filament store. She she just posted a filament the other day that had like this sharp transition I have no idea how to do it. Maybe some palette like device. I don't know asked her We'll have to ask her Tell us on uh tell us on chat. Courtney how you did it. I also saw uh, I saw chris I want to say hey chris. I can't wait to finish up that uh lightsaber with you but more importantly your suit came out phenomenally and uh, hopefully we'll we'll feature that soon. I think in a couple weeks We're gonna have you on and talk about all that good stuff. Um Oh, you know what it what's funny about that is I was just gonna say go pick shannon up from the airport Uh, because she's stuck there, but it looks like you already found shannon. There you go Look, there's chris right there Where my shop? How you guys doing? Good. Hey so So, uh, shannon found a way to be with us, which is awesome. We're just talking with nason and melissa from uh cookie cat and So that that was where we're at right now. So welcome to the stream Sorry, we're sorry we're late. Uh, you know, I had to make an emergency trip to the airport I'm gonna hop off and let you guys do this thing. You sure you can stay on if you want. No, I'm gonna Hang on. Oh, she's really quiet. Uh, yeah, we can't hear you shannon Can't hear very well That's okay We're gonna keep keep rolling with uh, nathan and melissa because I want to talk about the uh, the actual CAD software you guys have um And that's this one right here so This is it. This is what your cookie cat, right? explain explain to me because um We we didn't you know, we didn't start with the filament. Uh, the way we got into 3d printing was actually through Uh, this software, um Yeah, I mentioned melissa's pastry chef. Uh, she needed cookie cutters Um, I would have a software background I wrote her something to like make so that she could kind of just sketch out a cutter And it would uh make the stl and 3d print it so that way Uh, she could just design them without you know using pad software Yeah, because nathan had a full-time job And he would come home from work and i'm like, I need this cookie cutter. You said you would make it if you got a 3d printer And he's like i'm tired. I don't want to make you cutters every night. So he's like here. I made you a script That's awesome software. Yeah, so this was back in like 2013 2012 2013 when we were like in the uh in the uh early caveman days of 3d printing and um This is you know, we had some of these early Frankenstein machines How does how does this um, I mean i'm looking at App.cookiecat.com and we have all the links in the description below So how does this work? You come here you it says drag a file here to upload What what kind of file can you throw in there? Um, usually just like a like a png it'll be something like um like The idea is basically something that has sharp edges So it could be like line art or coloring pages or clip art or like you could use an image like the little examples Yeah, you can click that ice cream cone And then the idea is that it makes the product for you. It would be it could be a cookie cutter could be embosser okay, um And so if you click that ice cream You can kind of see I was gonna cheat and throw my logo in there. Oh, yeah Well your logo. Yeah, you can try that the only thing is if it's uh, if it's lots of different colors We'll see how it behaves You have a silhouette version like a black and white Uh, or black I remember the flame by itself. Does it do an svg? Uh, no, no, no Well, let's let's for lack of a time. Let's do this. We'll grab this one and go Yeah, okay Oh, nice scroll around you can move the design right there So even people even though you could do this in CAD software here It's just really fast, right? And a lot of people who are using this to make things like cookie cutters They don't there's no reason that you would need to use CAD software every time and just keep repeating your works, right? So you can just come in here Click a button, you know, maybe change a couple settings put in the side So all the settings just relate to how tall you want it most of those you would probably just set once For your preference. Yeah, so there you could see different things you could make We have a lot of clay people that use our designs for clay jewelry So they have really tiny things Um, you can do embossers you can do cutter sets like this Yeah, we had a bunch of dog bones that was Someone at mirf said they were going to use the embossers to press leather and uh, I gotta See if I can dig up who that was to make to you know to um That's cool to stamp leather So essentially you can put stamps in there and just print it out and it's just you know Like I said, you don't need to know CAD software. Uh, you don't need to know and he told you just put up an image You can find uh images online You can go to something like the noun project and just find any shape or anything Um, and it can do detailed so uh, it could do like a detailed stamp also, but uh, we don't have an example over there Experimental settings Hey get out of there No, you We should have told you to log in before to see all the Oh But this this is super cool because yeah It makes it super easy for someone to do if they want to do it looks like a stamp or a cookie cutter um or a both Well, what's what's an imprint cutter would be to continue just adding sort of like just easy ways of turning uh, a simple design something anybody can kind of sketch into a shape and turn that into like a product like into a real So chris has a question Can you hear him if I lean in like that? Yeah, can you hear me? Yes? Yeah What about stencils? Oh, yeah, yeah, you can actually make stencils. It's not a preset there But if you um if you uploaded an image that had holes in it right that had like um Then we actually on our forum we have settings for a stencil. Oh nice our community form. Yeah No, I need that's awesome week ago. Oh, yeah Too late But now now on your next project, you know, yeah, now I know Yeah, but you can do you can make stencils as well. Um, you can do cake toppers Oh, wow So actually so we've been you know, we've been uh, so when we started doing this and we released it and then we've got like Tons of people using this. Um, not just for making cookie cutters, but for education, right? So we I ran into somebody. Uh, oh he wrote his name down I'll find it in a second. I ran into somebody at oh allen allen bachman Uh, I ran into a mirf and he's like, oh cookie cat. Um, we use you guys at our maker space Uh, part of our intro to 3d printing course, right? So because You don't want to take somebody who's new to 3d printing and throw them into fusion 360 You know, or even tinker cat or something because that's that's a big jump, right? So what you do is they say, okay, look Go find some clip art or just sketch something with a sharpie. Take a photo with your phone upload it, right? Okay And make a cookie cutter, you know, five minutes later. Now you've got your stl and you can learn The process and we've had we have teach we have schools using it. Um, there's a ton of libraries that If you google like cookie cat in library, I find they never get in touch with us So I just find them I find all these libraries that have done like, uh, courses and events. Oh, wow And they never tell you that's crazy They don't because you know what it's free to sign up for that stuff. So they just do it You know, you know when I found out I one day it was down, right? aws services amazon was down and so we were down and so suddenly I get a message And just someone's like help. Well, I need this for my class and I was like, help me more What class? So she said that she does this dual curriculum in their stem program They do in the stem side. They have uh people Making these cookie cutters and they and then they uh, yeah, they said, oh nice awesome There you go spin that around And then there you go. That's the market. Yeah, if you click cutter plus stamp you'll see the uh To or just stamp you'll see kind of a snap version Yeah, do just snap and you'll see what that does. Yeah So, yeah, they're using it They have this dual curriculum and then on the business side of things they calculate the cost of the filament and they, you know Kind of just figure out what the So Nice So so I love that I love that and so, uh, we've been working on something else and I uh, I asked you right before the Show if we could kind of just announce it here Yeah, let's do it So, yeah breaking news Uh, it's Caleb is Scary around he can give a graphic or something Yeah, breaking news. We could do. Hey, you know what we could do. We have makers news. Let's do it. All right Hey Let's see if I got I got uh, I got geary on his It might be some sort of plastic That was perfect. I love that So our news is we we've uh, we've been working on a new uh, a new software. Uh, and uh, um, it's probably going to be called No, so we were calling it uh, cat it Um, and it's the same idea as cookie cat where you can really just turn any kind of like, um image Um, not an yeah an image or just something really easy into, um Um Into an stl for printing that the idea is it's a really easy to use cat software that anybody Uh, can use right and so things like tinker cat exist But even with tinker cat if you're new and you've not done 3d modeling before You have to learn how to orbit the camera and to move things around. There's a lot of like Uh, just technical skillset. There's a learning curve. Just to be able to kind of make stuff there. Um The way cat it works is you kind of work in like a 2d space And then create your 3d things. Okay. Um, almost like you can do that in fusion 360 But a much, uh more, you know easier to use version. Um, and I can actually Show it. Do you have a can you show us? Let's check this out. I'm super excited. I wanted to actually kind of I've been busting my, uh, you know, uh, just trying to uh, I've been busting my ass here trying to get it done for the joe And so I had to not have it ready that we can show it because I thought that would be fun. Um, But it's not it's not released. But then it'll be soon I think oh, I thought you were frozen there shannon not gonna lie I'm listening very now. I you guys are both sitting there so still I was like, they're frozen. This is awesome We're here. We're here. We're here. We're semi-alive. I I'm not I don't know what day it is You had a had a long sandiated comic-con weekend. I don't want to talk about it. Yeah. Yeah Let's not Let's not then I will remove her from the show All right, we're gonna do I think we might get end up with a little okay He's doing all right. I think I shared my screen Okay, can you see I should move that there Okay You can see it. Can you see it? Yes. Oh, yeah, nice. All right. So what we did here is I brought in the hot mix a little That's awesome. Let's step ahead of you, right? And um And we made this here. I actually printed it and uh, proof, you know prusa I always get there wrong. Uh, I said it would be done in time for the show and they lied No That doesn't happen. So if maybe it's ready I got checking on it. It's printing. So uh on the printer back there, right? You can see here like, you know, this um, we just started kind of with this three with this image on this side And so similar to, you know, kind of um and cookie cat You're gonna work you can work in a 2d space here, right? And It's then we'll make stuff in 3d. Okay um So What we've done what we did here is I actually brought in your logo and it can trace it And that's a really easy way to start because just like with cookie cat a lot of the people who use cookie cat They don't they're not artistic either and what they'll do is you can use a site like Which has got like a million free for commercial use images or it's a lot of places where you can find clip art and images to to um To use and so you bring something like that in and You know and you can make you know, you can kind of adjust uh make a little adjustments here. Um Just kind of you know, so I kind of adjusted the height. Oh, wow. All right. It's done It's done enough. She just took it out incredible. Yes. Oh, hang on. We're married. We're married That's okay. No, you it's good. It looks good I think I can unmarry. Hang on. Let me let me figure out. Let me do this. Here you go. Now Let's check this out You cannot marry I married us on purpose before so that we could uh, it doesn't matter yet there That's in our sunset filament. Um, it's just one spool. I didn't I didn't do any color changes Um, I mean It just you know because it because it pretty vertically things like this are really cool to do Yeah, we got the idea from somebody on tiktok. They recently made something like this with one of our transitions and I was like That's so good genius because as it gets to the higher layers, it's suddenly a different color Yeah, that looks awesome. It looks like you did a color swap, but you don't have that like hard edge, you know I know I first saw your your filament Ben it's boy in space did some stuff on tiktok with it. I was like, what is this and then we met you at murf and I was like, whoa So but this this is super cool. So you start out Um, so you start out. I mean, I'm gonna I can do a new one here. Um, let's do this. No, that that's awesome Is that working maybe no All right, that's fine. So, uh, you got some basic shapes and stuff you can do You can kind of you know, you draw out what the thing you want to make and we can make like uh, here I'll make a little like, uh What should we make car? Nice, you know and you can free draw so the free draw I'm anticipating like even like little kids on an ipad Just drawing a shape right little kids and then You can then you know, obviously they wouldn't be three printing it themselves But they would get the concept right and there was a preschool that was doing this with cookie cad with the cookie cutters The kids would draw a shape and then they would 3d print it and then they would come home with like, I made this I designed That's so cool. Yeah That's yeah, that's what we're going for here and and you know, I think it's going to be more than just uh for kids, um There's there's a sort of engineering aspect to it because you're working in the 2d space, you know You can see our 44 millimeters 42 millimeters. We're going to add some tools here so that you can Uh do some of the stuff you can do in fusion like dimensioning And once we do that right now, you can only draw in one plane and that's x y the floor But we're going to add other planes and once we do that it's going to kind of be a bit of like an easy to use fusion I really like that because I've always said like why in today's technology do we not have something that's like this Simple to create something like that. So, you know, maybe not like the more in-depth thing like you know, the Yeah, I mean we're supposed to be printing for one, right? Most of the 3d CAD software out there is meant for all sorts of manufacturing Right. You can use it for you can use it for injection molding I mean fusion 360 is used in all at many industries And the tool sets that they have is huge. Um, even tinker cat tries to do lots of different, um You know and so and so um You know, yeah, we're we're focused. Yeah, exactly. We're doing this for the 3d creative community. You know, we really just want Um, you know, I love when more people get into it You're bringing it to the hobbyists Yeah, I I like this idea of my uh, this is actually my mom, but she said, um, Basically the handprint of kids, uh for gifts or ornaments. That's a great idea like here draw something You know draw some shapes or whatever you want and then print it out That is a really easy to do like here, you know, you can just you know, they can draw draw face and uh, I know what I'm doing. Yeah I do Christmas ornaments of like fans and stuff for family and I will definitely Yeah, that would be cool and and if you can um easily put a hole or uh, yeah Yeah, I mean or well, you know what you could just do a circle and attach it to the top of the square there And there you go. You know you have you can make a hole also. So yeah, yeah, you can use it You're pretty easy to make it an ornament. That's that's super cool. I think Oh, yeah, there's a text tool also so you can add so part of the goal also Which uh right now there is a text tool and you can type but uh part of the goal also will be To edit stls, right and to make not not to necessarily make, you know, uh a dragon, but to, uh personalize right So I'm thinking you, you know, you're selling some You know product that you're that you're 3d printing or you're making gifts for people It's so much better when it's personalized, right? That's the magic right that I made this for you a unique item So the idea here would be that you can put just, you know, put people's names put, you know on on So if you have a spot on your 3d print on your model Um, and hopefully the designers will start to design with that in mind With a spot on the model for personalizing then you can just kind of pop it in Um, you know, I anticipate you kind of just mark where that spot goes All you got to do each time is just type in new text and you're ready to go Ah, yeah, yeah, you know, even now I've tried to do that and every time you have to put a new name on You got to go back into fusion Yeah, and re extrude everything. It just doesn't handle that well How um, uh, how do I say so you did the the hot makes, uh Plack, I'm not sure what you call that right. There you go. Yeah, how did you put it on a base? So what I did was Draw square and then I brought in the image Okay, and then I and then I uh, so you want to put that like There's a trace tool. Okay I can possibly do it live, but uh, oh, that's okay. If you I mean I was just curious Is it gonna be as simple as basically there's a trace tool and then you can take a cube like this, right? We'll just make it solid and then there you go. That was really it and then you just make that lower just play with the heights a little bit That's it So here. Well, I'll make the smiley face. You'll see. Yeah, there you go. There you go taller This one's up Oh that totally doesn't matter. You only need one eye exactly tripod only has one leg so all right, and there's uh, oh no I lost an eye Looks cool like that. Yeah, and then yeah, here's our uh, you know, this is made by my kid my kid made this I did not Actually that looks like my drawing so Hey, that's actually that looks like the pooch rock Yeah Where we go and there's your christmas ornament I love that. It's so good So good. Yeah, and you know what and then and see and the thing is if you're working on the 2d side You don't have to worry about this right and especially with the little kids Someone could come afterwards and just do that little step for them, you know, um You know, you're you're gonna be Working on 2d, right? No, that's that's such a cool idea. Um I think You know, there's so much potential in that I like I don't know why until I met you guys I never heard of this the cookie cad software So and that's a super cool thing because there were no events. We couldn't meet you before Right, right, you know, uh, but no what's cool about this is that I mean kids can do this I can probably do this So that's like kids and uh, you know, I could pretty much Come in here and make a bunch of shapes and go if I need Just a plaque like the base of a plaque that's going to be super simple to do in this and just you know Go so that's that's pretty awesome And I like that you make it just for um, there you go just for uh, you know, 3d printing essentially I mean you you're gearing towards that. Yes You know, it's that there's a sort of it seems to me like there's just sort of uh Second wave now of consumer adoption, right? The first wave was mostly like Tinkerers really right people who love engineering and playing with machines and can handle it But now there's people getting them that you know Are just kind of wanted just to work out of the box right and um and want to make stuff, but you know and and There's a whole new Economy right really popping up around this, you know, I really uh, I found that fascinating, right? There's these designers now that are earning their income by Just designing things for 3d people 3d print nothing else, right? Yeah, yeah, elated creature until now the designers never got uh money They just got you know, they put stuff on Thingiverse and you said thanks Well, we have we have like you know, we have clock spring. We have Wexger Gotta think the last they saw over a thousand subscribers on his you know, oh, yeah Um hex 3d is a massive A massive patreon. There you go You know, you know, you have chelsea and garret over there doing a ton of stuff a bunch of which is free You know and then you know, they have a sweet sweet Patreon as well and that's so cool. I I have one of those two and uh, I Clock spring is a genius. Sven is a genius, but I love that transition now You know what and that's and that's and what what I think clock springs genius is is that he He doesn't just in the early days of 3d printing people took stuff that existed and they were like What if I could 3d print it he designs for 3d printing and he makes things that you've never seen before Because the only way you could make it is for 3d printing. Yeah, orio. You mentioned we talked about the orio fund. We've got a giant This was printed in our chip. Wow That looks so good. They're a little chips. Yeah, it looks great Kind of kind of like marble Ish. Yeah. Yeah, they're marbles. They're marbles, but they're colored marbles while the white and the other ones are Nice The the transition sell the models and the models sell the film Oh, does the software run on a server locally or a server or locally as a software engineer? I'm picking scale because this would get a lot of use. Thank you. I really hope so um cookie cat is entirely um Serverless, I guess you could call it it runs on amazon Yeah, okay So it runs on their servers. It runs on their servers. That's right serverless Just really is a funny word. But uh, what it really means is that it can scale. It's kind of yeah when he was asking got it That's cool to be installed. Yeah Uh, I I think this is awesome And I hope you know, I wish you the best as far as success on this thing I know cookie cat has taken off You just go to any of the facebook groups and type in the cookie cat And you find in the cookie cutter groups There's a you know, you find a bunch of posts and people using it and like you said stuff You didn't even know schools libraries that kind of thing um I think uh, yeah, I think we have we have some time for some hot makes you guys gonna stick around Let's check out some stuff the other people have made too Yes, let's do it. There you go. I love it. Uh, ladies gentlemen, let's do some hot makes Let's go All right. I'm just reading the in between there. I was reading comments and I love it Uh, so what we got first happy birthday zolan happy birthday This was from local maker michigan and uh, he made you a pretty cool print there So happy birthday zolan. I didn't know it was your birthday. Yes. Happy birthday. I think it was the I want to say the 15th or the 16th because I remember uh, we had a streamer before I left and we celebrated his birthday Oh, nice 18th is when this post was done. So okay, there you go. It was right around there. We'll say that Um, happy birthday. That's awesome. Uh, what else we got here? uh, jacob kinch I posted a new 3d printed game on the printables.com took a few hours to design a few days to print So I really appreciate it if you check it out. Uh, it looks really cool. Um, let me just jump on there. There you go So it's all 3d printed This is this is all it got Um, I'm sure if we went here we could probably find out some more uh, looks like Maybe a description multi colors using up to four colors Um, each player has 16 sheep tokens and four hexagon board tiles so there you go a little bit of uh Pictures there, but it's really cool that people can just like me. I'm gonna make a game today, you know I'm gonna print a game today. Yeah. Yeah. I'm gonna I'm not I'm gonna make it design it then I'm gonna print it, you know Um, I love that that that's what's super cool about any of like, you know the 3d printing The the cnc the laser stuff any of that stuff you come up with stuff and you're like I want to make that quick Yeah Um, oh, there we go. Sorry about that Um, hi Nathan most said thank you for your generosity. Both are awesome. So humble and I am Yeah, I'm emerging of worlds. Yeah, you said you hadn't heard of us, but if you were in cookie world I would have came to cookie con. There is a cookie con What we have exhibited at cookie con convention. Wait, wait, wait, wait, wait Where is your wants to know where's cookie con located and when is this okay? So it travels around so it makes it easier for different people. It's gonna be in Ohio Going to Ohio in March. I think what part of Ohio? Yeah The best part I don't actually know which part of Ohio. Is there there's a good part of Ohio? I uh, I'm not gonna lie if I went to cookie con. I probably wouldn't be walking when I was if people had cookies there It is it is everything you imagine and more. Oh my gosh It is it is it is nothing It is nothing like murph So that's the opposite of murph I'm gonna sell out now Yeah Last year Um, well, I I you know murph has a very male representation Yes, very female representation It was one of like 10 men there So the odds are good if you're single find cookie con I'm just joking But I yeah It's uh, it's a lot of fun. It's a lot of fun. And thank you, uh, spare honey. I'm just there for the cookies Yeah, so the cover is a club. Um, where she teaches people how to make stuff for for cookies So For cookie making, you know cookie cutters I love it. I might have to check out cookie con Yeah, cookie con. All right. What do we got next year astral printer makers unite, uh, let's make or let the making commence This is for Toys for Tots 2022. I see 3d Uh, there you go. He's already started making all the cool things here to donate. Um for this year That's their train The trains Yeah, that's the that's the taut train, right? Yeah, there's uh, there's like a big toy drive and what's really cool is like a ton of people from the community come in And they have all these different models you can print in or you can I think you can print Um, I can't remember if it was specific or you know, things you like like I see a bunch of flexi dinosaurs there Approved things I something like that and like guidelines Um, and I know a couple different people do this too. It's just really cool because you know, even if it's something like this Um, right a kid that needs it would love this. I know my son If if I printed a train like this for him, he would play that that thing for a while. I mean at least six or seven minutes Like that I would play with that. So the kids are excited. Trust me Right. Oh, I would definitely print with it. Um, so awesome astral printer. Thank you for your Contribution and everybody else if you want to get involved check that out as we get a little closer Maybe I'll have to dig the info up because I know we don't want to get too close when people miss it Um, but check out ic3d. I know a bunch of that's on uh, their stuff and then Um, Toys for Tots, but ic3d has a bunch of stuff Uh on their website about it too. Uh, what else we got local maker michigan My first rep cord rep rack It's small but mighty there we go Here's a nice rep rack So So that is for holding your filament. So rep rep cord open source to whole rep rack System you can buy stuff straight from him and and if you need to I highly suggest it Pooch is an awesome guy and he always has like really cool stuff Um, I actually just printed I think six Of these side panels and I've started there and and and I've been gone now for a while But um, I'm gonna make hopefully make some nice big areas for my filament as well with these So check it out. It's the rep rack system. It's on rep cord.com and uh, definitely worth a check out there Um Xul equals extra cool. Thank you, adam This is really cool. Yeah, someone tagged us and uh, tom lama says Okay, that's a serious hot makes or cool makes so Uh, this is something I need I think Yeah, I uh Yeah, I think this is great. You should work around earth like that Yeah Phenomenal, uh, that is ready for it. It's ingenuity. I don't think so Yeah, but I can tell you that's her biggest fan. Um Oh my god every every show i'm like, why do I come back and there's always that one point and it's always a dad joke that you make I'm a sucker for dad jokes. So Thank you. Thank you um Next chris travis, uh, this is rescue. It's a bust by wicked at 27 percent Uh printed on the enicubic photon mono and no, I won't be painting it and Um, this is pretty awesome at 27 percent. This thing's got to be tiny. You can see it on a box of filament here Um, this thing is tiny. I wish we had a banana for scale. Uh, come on chris Where's your banana for scale? You want a banana? I want it. Um This is pretty cool. Uh I I like the model and I love that you made it tiny I like that arm or better than the one that like destroyed my body. There's a file there. Is the file like on there? Uh No, it looks I need one. It's by wicked. I have another like I'm not sure by yeah. Yeah. I'm not sure where they got it either chris if you're with us I'm I didn't I don't think I saw him in chat yet, but if you're with us, let us know where you found that file too All right, what do we got next here? um This was awesome, uh It it might sound as an insane idea, but especially because it took 83 days of planning dreaming building and filming But in the end the brick wall will give you or gave you a Cucumber house being constructed using lego. All right, here we go. So this this what this is is a house made of cucumbers Being automatically constructed or it constructed via lego. So Uh, here we go. So you got to drop them down Then you got a you know trim your, um Cucumbers up there. You want to make sure you have the right size? Uh I guess logs cucumber. I don't know what you call them. Um And then a little mill there that mills them out so they're flat. Come on. This is amazing. Make me salad Yeah, right. It probably could I mean, I think you just eat the cucumber house at the end Yeah, it's basically making Lincoln logs out of cucumbers. Um, I mean, it's making too much But automated, right? Oh cutting cutting for doors and windows I mean everyone's gonna ask why and I'm gonna say why not You know Cucumber construction is way ahead of real construction So I knew they were 3d printing houses, but I didn't imagine that they were biodegradable. Um housing crisis solved This is awesome and it's all done by that by the lego. I mean So good Like a yard 83 days So good, let us know in the chat. Is this hot? I want to know. I think this is hot It is posting the thank you. It's posting. Yes That's hot In cucumber world, yeah I'm starving now and I kind of want to have a snowball fight cucumber town whatever. I mean Give us your best name for cucumber lender town or whatever you want to call it in the chat too I want to know what you get but this was phenomenal this this may go This might be the hot make of the year. Um There's we've seen some amazing stuff and I've never seen legos building a cucumber log cabin um No, what is who did this and what does he do? I hope this solves the world's problems like stop doing this Take this to a company Maybe this is what solves the world's problems Build everything out of cucumbers Everything out of legos. What are we doing? Then I don't have to eat them That's not the solution. I mean use real real building blocks jim come on Not cucumbers cucumberville That's nice. I like it. How do you keep your cover so fresh? I like that So, uh, nice work. This is phenomenal and if you have not seen this Don't forget link in the description below goes to a google doc which would show you one episode 110. This is linked there Um, wow, that's all I got to say. Wow. All right next um white light entertainment How things turn out when you run out of flesh? Uh resin and pour in gray can't show you too much because it's a family show um There you go. I guess we went from uh, I'm trying it looks like this is I don't even know Like upside down, but it's funny because of that gets serious transition. I ran out stop So, uh white light entertainment. Thanks for tagging us. Let's do that and thank you for keeping it Uh pg ish 13 I have done this. I have definitely done this. Yeah. Oh, yeah. I think if you resin print I don't know if anybody hasn't been like, oh, it's almost out. Just grab a you jump it in, you know Yep, um, I've gone from transparent to gray and then it's all sorts of different transparency Flesh to gray. Yes, uh, what else do we got here? Um, oh, yeah, I thought I thought you guys were like the same person that did the cucumber Same person that did the cucumber house, right? But he tags this one he tags this one artist Dante to tony Help me there. I replaced a wall of his home using lego and built a bunch of hidden rooms including Omnia and overwatch room and an alia induction and more So this is uh, this is about a video Bro, I'm not ready for this. I'm not ready. Yeah One No Shot dude Like Wednesday night A alien abduction room a little UFO in there. Yeah That person was taking a selfie. Yeah, and then um, there you go. That's a paradise world. He said Um Yeah Oh Change the colors with the black light So cute. Oh man. Uh, oh there you go overwatch room Um It's so good what else Oh and a mini version of the house that that was there's a mini version of his house Um, I can hear the audio. I think we have the audio off just in case uh, we get copyrighted with music, but um This is This is um, that's actually controlling the climate and inside inside. Yeah, yeah This is um, okay. I want to I need to meet this person because everything that I've seen is just like you said like You don't need to ask why it's this cool But like I really want to know what what how's the thought process I hope this isn't going to bite me in the butt, but I got to go here. There we go This is the guy who did the dante dintoni. I think um Denny, I don't know Uh, but you know, I was curious if he had any other cool Where is he based out of? There's a little map down there. Yep. Let's see Uh Argentina to miami Well, I'm not near either. Uh, that's what I'm thinking here. Let's see here Oh, yeah, miami florida miami florida right there Um, all I know is maybe we need to hit this guy up and see if you want to come in And and see, uh, I mean he does like high-end art. It looks like Whoa Oh, look, he's creating it. I can't make this any bigger. That's that I mean, where's the cover thing? He doesn't uh, that's not I don't think this that's not this guy Oh, it's not this guy. No, uh, the same the same guy tagged it. Um, but that wasn't Yeah, no, I heard that the same way don't worry. Sorry that that's what I meant. I apologize. This this person tagged it. Yeah He does lego art is what rc maniac said, um, I like it this I uh, we need to hit it. We need to hit this person up and see if he wants to We need to see this like hey, can you take us over to the corner of your house where the wall is lego? That would be amazing. All right And uh, last but not least neil 3d prints Uh, so I have a new prusa mini designed the Help me out with this one tech Tacoma tech a coma mod. There we go from ghost in a shell Uh might still give it a head as well as other features, but you get the idea. This is a work in progress Yes Yes, yes. Yes. This is awesome Um, very nice Again people are gonna be like why but the question is why not if you can do it if you can do it. Why not? It's so good. That needs to be our next round of t-shirts. Just like hot names. Why not? Yes Uh, yeah, well, I think it's a rope. I need to know giri. Can you find out what this whatever tech a coma is? um I need to know like can you can you pull up a picture maybe or uh? I don't know. It's from ghost in a shell. So in the uh In the the documentary on netflix called man on wire It's the guy who he strung a wire between the world, you know world trade centers and he and he did things like that And and at some point people asked him he's talking about people ask him why And he goes he's his french. He's like such an american question True it probably That is true. Uh, there you go. Let's see what we got. Yes. So there that is what it was and Any uh repurpose remodeled into so the prusa many fits in it. That's awesome. There you go. There you go Uh, that was awesome and that was our hot makes fro today Super cool stuff today. Um, I mean not only did we see like some awesome birthday stuff We saw a house made it of cucumbers and a lego wall. Um, so I mean, what else could you ask for? Um, also, thank you so much You guys for being here. Um, I don't know. I super pumped. Let us know when you're ready to launch Uh, maybe we'll have to have you on again. Let's do a launch party or something. It'll be a lot of fun Yeah, I mean Yeah, uh, hopefully we'll have it out soon. Usually we just push these things out really early anyway So, you know, if anybody wants to play with it, just get in touch with me and I'll let you play with it for I'm gonna go with that. We're gonna go with that. Um We're just gonna let that fly. All right. Hey shannon really quick. Um, is it okay if I share any of the video you sent me Yeah, oh Um of of the wally of the wall. Yeah, okay You know what you can start sharing and I'm gonna link you a couple more that that brad took because he got some really Cute interaction that guy was super nice by the way. Yeah, I got to meet him. Yeah Um, I know it we're way above time or we're a little over time but but um, Let's see. I'm gonna Yeah Um, so shannon shannon was able to run into the guess we had on last week Which was super cool and uh, you guys ran into each other. There you go. He built Like multiple times too. Yeah matt hobbs matt hobbs was his name and in Um, you ran into him at that the the comic-con. You know, we talked last week Hopefully you guys we're gonna meet and she was able to send us. Oh, of course. I just uh Accidentally removed the wrong tab, of course I gotta show this real quick before we go I can't pull the additional ones But like next time we talk about it in full like I'll pull my cute videos because there's other ones that are so adorable Let me just see here. You have like kid interactions and yeah Brad got a bunch of kids interacting. He's on it. Yeah That's what I got. I got this one. Um, geary. Can we get my sound up? Um, I don't know that you want the sound up though. I was kind of talking over them. Oh, maybe not Gary don't turn the sound up. Uh, here's here's a There we go. It looks like a kid interaction act. Oh, there you go The kid in action with walley. This thing is we literally just watched walley with the kids last week. Yes. Yes Well, it was really cute This this thing was So the funny thing is that he would stop There was a couple of them and they would stop them and interact and we'd see like all these people on the outside That are like in a u-shape around it and then security had to come by and be like, no We need to keep this walkway open. Yeah, and then they'd have to like go relocate until they got yelled at again Nice it is hot boots Jack in the shop full size. Yes, it is. Um, as you can see there, it's almost the size of that kid Um, this thing is this thing is sick. Yeah I think my friend offered to buy it from him What? So there's only one exist just this is the only one that exists Of his Yeah, they're working on a number two and there's other people that are making them So there's a group and the files are out there and you can you can do this yourself if you want Um, which is really cool. Is he the designer or he assembled it the one that um on the show working with working with many people Together they're coming up with that. Yeah. Yeah. Yeah. Um, I can't remember who the actual designer is. Um To be fair, uh, but let's see. I know we got a couple of He needs to hit up disney No, he goes to like this. He did Um, or just so disney doesn't hit him up so he um He actually Got this one. He was painted different in the beginning last week. He was telling us the story It was painted different in the beginning and what they did they approached him and said, hey, you give it the paint job And we'll approve it to be the first actual Wally, you know, and so they they read he redid He redid everything like the paint job and and refinished it and all that stuff and Pixar Approved it as an official wally Um, which is really cool. I mean, of course you have to say yes to that, right? Yeah Um, here's a let's see. I hope the artist that designed wally saw it Oh, I'm sure I'm sure It's so cool how it moves and oh, yeah, there we go Awesome, but uh nice where I'm glad I can't wait to talk to you guys more about that and get some cool videos and pictures and and I want to see Chris your new your new cosplay looked pretty fire as well. So I can't wait to see We have so many like fun stories and we're going to find a time where we can like talk about the convention and everything Because he had a phenomenal weekend. He really did nice. So well, we we will look forward to that I know uh, you're traveling again. Maybe next week, but maybe the following. We'll see we'll see how it goes I know I know we're running late everybody. I want to respect everybody's time. So Um, shannon anything else before we go? Whoa Not right now Nathan and melissa, how about before we go let us know who you are what you do where we can find you And and all that good stuff What are we Nathan and melissa find us on cookie cad instagram tiktok facebook On instagram and tiktok. It's at cookie dot cad uh cookie cad dot com um that Yeah, cookie cad dot com links to all the other stuff. I think so. Oh nice perfect and in the description below Yeah, we'll add a link to cat it at some point when it's out and then also, um, I believe someone said he thought that pics are Weathered it for for him So he said that he had it painted originally and then he brought it to an event or a movie or something And um or like one of the parts and they were like no if you want this here, it needs to be Accurate so I think they like gave him the correct paint and then when they was supposed to be like used at one of these things They weathered it if I remember correctly. I think I think you're right something like that If I I I think we'd have to I can't remember but I'm pretty sure you're right about that Yeah, and he and he was like and he was like and it was awesome because they weather I do remember that now because he's like and they weathered it and it looks so good. Yeah, I remember that Now I'm gonna have to go back and watch last week's episode because he told us so much stuff And not only did he do that he worked on the the you know the satellite, uh, our telescope that's up there right now the james uh, was the interval right and Or james web would I say level? Um, I speaking of that I saw star link they launched friday a bunch of telescopes and it happened to be The trajectory was right over the top of us at like 1115 uh in wyoming So like we looked up we're like what the what what is that? It was like a line of them before they take their own orbits And it was really cool. But uh, I had to look it up. I was like I'm pretty sure but let me see what this really is Anyways, everybody else. Thank you so much for being here. Uh, thanks for having us on Yeah, definitely stay right there. We'll be right back with you guys Everybody else. Thank you guys for being here another monday night. We'll see you next week right here on hot makes 6 p.m Don't forget to find the cool stuff and tag us hashtag hot makes we want to see your cool stuff And we'll get it out there just like we did today. So everybody have a great weekend a great week And we will see you next week. Bye everybody. See you later You