 What is up Hot Makers? Welcome to Hot Makes, right here on Hot Makes, Hot Makes Live, all the things. Hot Makes, Hot Makes, Hot Makes. Yeah, yeah, yeah. I'm Nerdy J, AKA Jim from The Edge of Tech. This is Caleb, how you doing Caleb? This is Caleb, I'm doing all right. It's a Monday, you know how Mondays go? It is, it's been a Monday, but that's okay. The show must go on. We were supposed to have David Hewlett on. Yeah. Unfortunately, as he posted on Twitter, he has succumbed to the COVID bug for the second time and it's one, we were talking this morning, we were good and about halfway through the day, it started really kicking his butt. Yeah. And he said, you know what, I got a reschedule and I was like, dude, that's perfectly fine. I know how much energy and passion he brings into this stuff and I just, I feel super bad that, you know, you're not feeling good. So if you're watching David, we miss you tonight, but don't worry, we'll see you again November 21st, I think is the date, is that right? Yes, that's the date that you sent me earlier. And I started working on like a graphical content calendar to send out to everybody too. And then obviously with today that immediately was inaccurate. So we'll send that out later. We'll change it up just a little bit, but I tell you, he'll be back with us November 21st, which is awesome, but tonight we're gonna have a little fun. Caleb is on and we're gonna do something completely different, but- Hey, Jim. Oh, go ahead. Ed is giving you a command. He says, sit. Yeah, wrong set. Crap, hang on. You know, I would, I would love to sit, but we're gonna do something different tonight. If you so choose throughout the night, you know that in the description is the PayPal link and we would love if you wanted to donate anything to the cookie fund, the standing fund, the IRF fund, because I'll be at IRF officially. Officially, yeah, to get Jim a chair. So officially I will be at IRF, everything's booked, hotel, flight, car, all the good stuff. So we'll be there. I know last week I still didn't book yet. So I have since then. A lot of fun. We're gonna have some fun with Sam Prentis, John from Tripod's Garage, and a whole bunch of other people that are gonna be there. We're bringing our, right here. I don't know if you can see it, our death racers. And I can bring it out, let's do that. I don't know if you guys have seen the death racers yet, but this is a death racer. You can build it yourself. I do not have my little death racer. I don't know what we're calling this officially. We're gonna put it there though. Is it like a bludgeon? What is it? Yeah, we'll call it a bludgeon. So the death stick. The death stick. You don't want to sell me death sticks. We had these at Murph, and mine might have been modified now because with some extra screws, because I broke it, Joel's had a heavy gloop on his, and his was destroyed at Murph. But the idea is you flip it on with the head like that. Everybody races around. You get your death sticks, your bludgeons, and you swing them. And when you get to this guy, if you hit this guy, it flips the little switch and knocks his head off like that, and it shuts your car off. And you know, you're disabled. Yeah, pretty much. Super fun to build. I wouldn't know, because I just put the tracks together. Tripod's watching. I know he's gonna throw that in there. But actually Tripod built this one for me at Murph. We were gonna film it, and then we didn't. And he's like, drop me off the parts. And the whole story I've said like six times now. But long story short, we'll have these at Murph. We're expecting a bunch of them. So that'll be a lot of fun. If you're going to Murph, you might still have time to build one. If you can get the parts, Polymaker is sponsoring. Wow. That was awesome. That was like a normal video for you. I do that so often in videos. Anyways, Polymaker is sponsoring the filament. If you're going to Murph, they will sponsor the filament for your racer. So that's gonna be cool. But the challenge right now is the gearboxes. They're hard to find. And hopefully mine get here by the October 2nd date that it said. What do you got in front of you there? Yeah, we're there, we're there. This, this, whoosh. Actually, it's much easier if I just show you on the screen. So let me pop that up. This is a happy birthday print for Photos Mint. Happy birthday, Photos. A bunch of people got together and we printed the mini from Wexner. And yeah, I'm super pumped about this. Happy birthday. Let's see. So we got, who we got here? That's mine. Yeah. Love that. Yeah. I gotta love this. This, this is that Proto Pasta and it is gorgeous stuff. Anyways, let's keep moving here. What else we got? Jay Ryan. Thank you. Ooh, that one's smooth. Yeah, happy birthday on that one. Photos is in the chat. Localmaker Michigan. Yeah, nice photos. Happy birthday, man. A couple days after mine. Mine is the 12th, which had been last Monday. I think yours was yesterday. My sister's was Saturday on this, I think Friday, Saturday, the 16th, whatever, whatever day that was, I think that was Friday. Localmaker Michigan, there's yours. Love that guy. I love the little pedestal that it was on. Yeah, I know. A lot more official. Very quick. Andrew Rogers, the myth of legend, Andrew Rogers. Subsector, you definitely gotta throw it next to that. I mean, it might not. Nice, nice. Right? What else we got here? Randomize-y. I think that's how you say that. I am terrible with these names sometimes. This one's awesome. Randomize-y, maybe, I don't know. Yeah, there you go. I like that. Is that hand printed or hand painted? It looks like. Yeah, it is. You can see, you can actually see it. She said that booty is fire. Why is the button, there's, okay. Yeah. That's what you don't get to see on the not colored prints, right? That's fantastic. It's so good. Again, happy birthday, Fotis. Thank you for joining us tonight, by the way. Chris Perillo, this one is for you. Oh, I love this. I had him bronzed for his hashtag Fotismint Day, which is pretty awesome, right? With the background and all out, Chris, you went all out. Let's see, Thomas, the maker, Viking, he jumped in there with a blue one. So am I missing something? Is that, hang on, let this one play until it rotates around. Do all of them show the butt? It's just that one was painted? Yeah, yeah, yeah, yeah. That's in the model. What am I missing here? What's the joke? Well, it's clearly like a, what do you call it, a toga or a robe of some sort? Let us know in the chat. I think Wexter did it. So I'm sure there's a funny joke here that we're missing, right? Sorry, Fotis, you're always on the ass. We love a Fotis, but ooh, nice, nice. Sorry. What else, fix him, dude. Happy birthday. Love that. Yeah. I love the shiny filaments. Okay, what do we got next here? That was a cool filament. Scott, there you go. I bet if you put this one on the green screen that Chris Perillo used. Yeah. To get it on the other photo, it would just disappear. It would be, yeah, just totally, totally invisible. There we go. Nice. Brian Vines, BB3D, the dad joke, the pun master. Let's see, Fotis shows it off all the time in his discord. For some reason, they're obsessed with my butt. Got it, got it. It's very cheeky, that's right, battle cry. Love it. Anyways, I spent an hour or two learning the painting tools of bamboo slicer to make this happen. And he painted this up in bamboo slicer. Nice work, Brian. I love all the colors there too. Yeah. Another trip around the sun, there we go. That's great. I do, I really like that one actually a lot. Nice work, is it Charo Zuck? We're gonna go with that. Oh, hey. Yeah. So, never mind, it doesn't matter, come on. He moved past it so it wasn't worth it. Big Nick, Big Nick, now a little Nick, Big Nick. Did this one? There you go. Big Nick, holy. Yeah. Bugman 140, nice work on that. You know if that's cookies and cream filament or if it's meant to be marble filament, either way it's cool looking. You know what, I love marble filament altogether. And last but not least, Allison 3D. Nice. Happy birthday, Photos Mint. And I know there's a bunch more and I apologize. I couldn't find them all and I couldn't get them all. But everybody out there, thank you for participating in Photos Mint's birthday day. And there you go. Happy birthday, Photos Mint. Good job, guys. Yeah. So there's that. Happy birthday, yeah. We need a birthday bumper. That's what we need. We can add, we can make something. I usually, I just play the little like kids cheering sound effects or like that thing. We could do like a birthday section so people could like submit their birthdays like a radio station, you know? Oh, yeah, yeah. Yeah, yeah, yeah. This is Jim from KTRS. We have a birthday list today. No. Love it. So anyways, like I said, we're supposed to have David healing on. We rescheduled David. David, feel better. Man, rest, get some sleep. I know you didn't even do the tech band. It's a podcast today and I know that crushes you as well. So get better, man. We have something crazy planned. We didn't know what we were going to do today and we came up with something crazy. So I don't even know how far. Holy mother of mercy. I know you're right. We're running out of time, boy. Here's the deal. We're going to work on projects and talk to you guys throughout the stream. I'm just going to move my stuff up here so I can see the chat bigger. There we go. So I am going to unbox a printer, try to get it built and printing before the end of the stream. We're going to see what happens. In 45 minutes now. In 45 minutes. I'm going to. 45 minutes now. If those of you have watched my printer unboxing streams, you know that that's not going to happen because I talk too much. Caleb, you got to try to make it happen backwards. Caleb is going to work on. What are you going to work on? Yeah, so you're while you're building a printer, I thought it would be fun because I do a lot of like digital Lego designing in a like Lego CAD design software called stud.io and I thought it'd be fun. While you're unpacking the printer, maybe people in the chat can give me some suggestions on like something that I could build and I can try to build that at the same time and see which one of us gets done with our project quicker. Nice. And they have a birthday channel on Maker Deck. I'm going to have to jump in there because I can see all the birthdays then. So, so yeah, let's pop that in the chat. Yeah, pop. Oh, I don't know if she can't. I don't know if what are you saying? Can she put the link in the chat? Yeah, I think it'll block it on it. Oh, I don't know. I mean worthy. I'm the admin. So yeah, that's true. Otherwise I can go grab it too. I can grab the link to the Maker Deck Discord if we want by the end of the show too. All right, here we do. Here we do. Keep Jim muted, somebody said. So what do I got? I was going to do a different printer, but I'm going to do this one instead. What do we got here? I don't even know what this is. It's under my desk and I haven't done it yet. It's the Ender 3. Michael, I also remember the LEGO Digital Designer program. Ender 3 S1 Plus. The Ender 3 S1 Plus. That's what we're going to unbox. I'm going to get rock and roll. And let me know in the chat if you have any questions. If you just want to talk in BS, that's cool. But this is our plan B today. Tripod is saying to ship the Death Racer. He'll bring it. Also, he might be getting two additional gearboxes. I might need two more. No, he said he might be getting two more. Nice. When I ordered mine, it said October 2nd. Fingers crossed, I paid for the extra shipping. We'll see what happens. Otherwise, I have this one. I just probably should get motors that work for it, because I'm pretty sure I might have blown them up at Murph. As a lot of us, the only person that didn't blow motors up was Tripod. Is that ironic or what? That's fantastic. So your failed ESC purchase saved your whole build. Man, I better hit that right here. One suggestion that I was expecting to build a little LEGO printer. What model are you building right now, Ender 3? This is the Ender 3 S1 Plus. Also, someone says, I have a budget of $1,200 for my first 3D printer. What should I buy? You should absolutely, in my opinion, for that awesome of a budget, you should pick up the Bamboo Lab X1 Carbon without the AMS. Or you could just get the regular X1 with shipping. It might be a little over $1,200, is what I'm thinking. But I'm telling you, I have one. I could have unboxed. My third one's not unboxed yet. I should probably do that. Anyways, I'm never going to get this done. I'm going to build a S1 Plus. What's the odds that I do this in time? Because I always talk too much. I want to interact. I have no idea. Yeah, Carbon 100%. I don't know who else is in the chat. You want to chime in on what the first printer should be for $1,200. Go ahead. I mean, a lot of people might say the Prusa. Prusa? Is it Prusa or Prusa? I don't know. I've heard it both, but I don't know. I don't know. I don't know. I think it's Prusa. But Prusa? Yeah, but I would say X1. OK, that's just me. So we're showing Jim full screen, and my screen is just tiny. And I'm not showing my screen. No showing up. That's funny. Thanks, Jim. Do it. Order at Prusa. See, I knew Andrew Rogers. Someone was going to be in there saying, go with the Prusa. And that's an awesome machine as well. I mean, that would be a solid purchase as well. Very, very nice machine. I personally like the BAM. I don't have a mini. My mini is awesome. I've got to point that out. My mini has been really nice. We have a rogue wheel. Good to know where to put that back. But you know what, though? This is red anodized metal. Nice. That's two rogue wheels. For those of you keeping track at home, two rogue wheels. Two rogue wheels. For now, it's the opposite of that. Yeah, I'm going to stick to that one. I like that suggestion. Also, oh man, I have rogue wheels. I just lifted this up on the build plate and pulled the build plate off the thing. I'm not going to say what I was thinking out loud because it makes me angry. All of the springs just came out. None of these are secured. All the springs came out, by the way. So I'm going to have to put that all back together. Nothing to see here. Thanks. Thank you, Creality. This printer was sent to me directly by Creality. Thank you so much for that. And I know it's been a couple of months, but we're getting it. Getting it unboxed today. Yeah. Man, that just stinks. There's shit up. It says it's grainy, but. Yeah, as he says there for the, what's grainy? Me? Why are we grainy? Maybe it's maybe. I'm checking the stream on YouTube and it doesn't seem grainy. Nice. I'm guessing it's just John messing with us. Potentially. Are you pretending to be a pirate, John? You got one eye closed? Jeez. All right, let's get this out of here. So what are you going to try to build there? I figured it would be fun to try to build the Ender 3 S1 plus that you're currently building and I'm starting. I didn't know what scale to start with. So I figured what I would do is just try to make the smallest scale spool of filament I can and then work from there. 3D print bunny says, which program are you using, Caleb? It's a program called stud.io. And you'll find me on that. Huh? What? What? Who? Oh geez. OK, OK, I just got the joke. Anyways. But yeah, it's got a really nice catalog of LEGO 3D geometry pieces and connects to your Bricklink account. So when you're done building something, you can just upload your model and then it makes a parts list and you can order the parts and build it in real life if you want to. Shut the front door. Yeah. So you can model it. Yeah, you model it and then it uploads as a parts list on your account and then you can put together carts for other people who are selling reused LEGO bricks and pieces you need. That is sick. I didn't know you could do that. Oh yeah, I do this stuff a lot. Well, I used to do this stuff a lot and I don't do as much anymore. That's why I thought it was a good opportunity to jump back in. Yeah, no, that's cool. I didn't know, wow, these springs are alluding me. What is going on here? This is going to be a fun stream if I'm there. I'll show you an example of something else that I had done recently. Do it. And in chat we're watching you. I'm focused on getting this plate back on because every single wheel was loose and every single spring fell out, so that is awesome. It's a model that I designed of the original concept art X-Wing that was really different looking before the movie came out. Sure. I thought it'd be cool to make. That's super cool and then you can just order the pieces. Yeah. Yeah. That is awesome. I might have to check that out. I'm going to lose this challenge if. I'm going to lose this challenge. Hey, I got the springs back on. I do like the red anodized wheels. They're nice. Good evening, Kyle. How are you doing? We are doing something crazy tonight. And we are trying to put together. We're doing it different. Yeah, we're being different tonight. We pulled an audible. Audible? Audible? What? I don't know what I'm talking about. Is that how you say it? Audible? Yeah. It's Caleb. Yeah, that's how you say it. Yeah, that's exactly what it's. Yeah. Go put all in the cellar tower. Oh, jeez. I never assembled a kit. We just had buckets of Legos. For the most part, I did too, but I did have some kicks. Tripods, a snake leg, and one eye. Nice. I love my S1 and my bamboo X1 carbon. Next one will be 300 plus. My next 300 plus will likely be this. Nice. My biggest problem. Are you saying this, like this printer? So the full disclosure, I was supposed to do the NEO today, the V2 NEO. OK. And I definitely left it in my garage and forgot to bring it to the studio. Oh, yeah, you were telling me that. It was last minute, and I was like, oh, I ran out the door and it got here. And that is the NEO that'll be given away at IRF this year at the Greengate 3D booth. Just like we did at MRF, if you bring spools, you can be entered to win prizes. And there's a lot more prizes than just the printer this year. And wow, what is happening? Why am I trying to do this the hard way? What's up, BB3D? And so, yeah, we're actually going to give away the Ender 3 V2 NEO at IRF this year at the Greengate 3D booth. So last, actually, Skydown came into MRF with a truck bed full, if you didn't see the video, of spools. He went home with my original Ender 3 V2 that I had given Rich the year before. And that thing was signed by all sorts of cool people. Man, everyone, I'm trying to think of who didn't sign it. I know Brian signed it. Brian's on there. A bunch of us signed it, and he got to take that bad boy home, which is great. All right. All right, I'm on to something. I finally got these wheels on. That took a minute. My guess is this is going to be the classic creality build now, four bolts, two in the sides, and then plug it all in, put the school holder on, put the screen on, and then rock and roll. All right. I just spent the first 10 minutes making a spool. So I think you're going to end up winning this. We'll see. I'm going to get this thing printing before the end of the stream, I think. I'm doing it. We're going to be streaming until like 9 o'clock, but no. That's nice. Let's see, Brian. Hey, tripod, I'll chat you when I'm done with this as well. But I appreciate you saying I can bring the death racer down or get it to you. I think you're driving to IRF, that's why, which is awesome. I am flying, and it doesn't go great on the airplane. I've been disappointed Jim's not blindfolded. You've watched my live streams. You know getting one of these up in 45 minutes or less is going to be a challenge for me anyway, because I talk too much. Ooh, that TT laser. Ooh, ouch, rough, rough. Gotta bring that up. That went real well. It didn't go well at all. It went bad. Rob, why not? Uh-oh. Solution? Check out the hook while the DJ remalls it. So in this particular case, the bolts go through the side. I'm digging that. I'm digging that. So the gantry sits down, and then your bolts go into the side instead of up through the bottom, which is kind of cool. There's two little grooves. It's groovy. It's groovy. Groovy, baby. Yeah. Yeah. So if you just joined us a little bit of a different show today, this is our plan. Yeah, baby. Yeah, baby. This is going to be loud. I ate a baby. That wasn't that loud. Good. I was trying not to yell into my lav mic that I have on right now. Get in my belly. Why did I do it that way? I could just do it this way. Toss me a freaking bone here, Caleb. Toss me a bone here. So anyways, if you just joined us as plan B, we were going to have a guest tonight, but unfortunately, COVID has struck, stricken, whatever you want to call it. This has taken a sweet time to screw in. It's not going in right. So we thought we'd have a little fun and do a challenge. We're seeing if I can get this Ender 3 S1 Plus built and printing before the end of the stream. And we're talking to you guys at the same time, having a little fun. We said, happy birthday to Photos Mint in the beginning. So happy birthday again. This is the Ender 3 S1 Plus, the Plus version. The Plus version. Yeah, the Plus version. Plus distractions. Plus distractions. It does look like it has, I'm not sure. I have to look and see which hot end it has if it has the regular or the pro. It does have the CR Touch though, which is awesome. At least, maybe mostly awesome. Now we're going to throw the mount here on there. Looks like we need about four M4 by 18s right there. As though shade. Tonight on Hot Makes, I can't even say that out loud. That was funny. That's right, you're close, you're close over there. That's awesome. I can't wait to see it. Plan B from Outer Space. Welcome to Not Makes. Welcome to Not Makes. Yes, yes. Where you learn how to tie knots. We're hoping to be able to make something with this when we're done. Right. It says four. Oh, M4 by 18s, it just shows three. Okay, good. That makes me feel a little better, but I'm going to grab a different one. I love these T-handles. These are my favorite T-handles. I just love T-handles. I love corn for you. Oh, yes. Coward. I love corn. Coward. It's juicy. I tried it with butter and it changed everything. Yes. Coward. Brian is right. The Ender III S1 Plus was the printer of the month for the Creality Printer of the Month Club in July. Before that was the S1 and the S1 Pro, which I did videos on those, too. Screwed. Why? Because I just, I mean, I'm just... It takes me forever to build things. So... You better buckle up. Let's do this. I'm questioning my decisions on bolts, but I'm looking at this and... I gotta pay attention. I need... Wrong hole. Wrong hole. Oh, geez. Is the plus is what you get when... Oh, wait. Yes. That's true. I know what I'm gonna do. I did. Ed's got it. I gotta turn this a little. My secret is turning the printer towards the edge of the table so I can use my T-handles without hitting the table. It's no secret. I've said that in many live streams, but... Now, Hot Makes Nose. Now, Hot Makes Nose. My British husband, Sam, will be there. Yes, he will. What about the... That's funny. $80 in tolls. That's awesome. I can't wait to see you guys. Obviously, we're giving Sam a lot of hard time, and that's gonna be fun. He's coming out again. He'll be driving out with a tripod, I believe. So yeah, we got the hotel, though. Everything's there. Gotta find the hole. There it is. So if you're out by IRF this year, it's near Baltimore in Bel Air, Maryland. We'll be there October 7th, 8th, 9th, or 8th and 9th, something like that. So come on out. Say, have some fun. Say hi. Next, what we wanna do is put the screen on. A bunch of people will be there. It's gonna be awesome. I know a bunch of people coming in from overseas. As you... I recently heard that John from Proper Printing is gonna be out there. Again, he'll be out there. He was out for MRF as well. Sam Prentice, Joe, makes some breaks. He'll be out there. We're talking about doing some hot makes on location with Joe for makes and breaks. That'll be a lot of fun. If we can get good signal, it'll happen. It might just be a Saturday or Sunday show if we can do it. All right, screen is on. Yeah, that's too long. Spool holder. It's got the juice. Man, you're gonna beat me for sure. Hey, hey, it's not about the race. It's a marathon, not a sprint, right? Okay, no, it's a sprint. It's definitely a sprint today. Yeah, it's kind of the point. Yeah, it is the point. Come on, you son of a gun. There we go. Spool holder. We're getting there though. I'm on to the actual... Spool holder. Either I didn't get one or I didn't get it out of the box. It's probably still in the box. So let me get stuff being plugged in and then we'll go get it. I'm still tying my shoes. Yeah. You've got the printer assembled and I am just on the top right now. I don't have it assembled yet. It's pretty much assembled. Yeah, John, how you doing? You're famous. John's gonna be there. He's famous. I don't know about you, not famous. You were featured recently, I think. For the prints, I didn't know what they were right out of the... Off the top when I was filming it. I was like, what do these things... I know they do some. Oh, duh. They're actually right here on the shelf behind me, John. Can't see them very well, but they are there. We're gonna find out. They are there. What else we got? Too far. I think it'll be 15 or 16 hours. Yeah, I think you're right. It's about, I think it was about 15 for me if I remember correctly. But that's okay. It would be a long drive for us, Shane. Of course, tripod's driving too, so it's gonna be a long one for him. I'm guessing 13 hours for tripod. Maybe I'm wrong on that. New email. What's up, new email? That's awesome. I appreciate the subscribe new email. We'll take any subscription we can get. Is that a username or is it? Yeah, that's a... Yeah, it's definitely the username. What else do we got? My mom's on. That's okay, John, I'm not... I'm in... Oh, you're not going either. Oh, you're not popular either. Yeah, you are. It's my mom. Hi, mom. Everybody say hi mom. Hi, Jim's mom. Yeah, yeah, yeah. I'm warm tonight. Here we go, here we go. I order one of my very few for you, Printer. I like the name. That's pretty awesome. What printer did you order? Better be a racer assembled and ready to go, tripod tells me. I thought you were gonna do it like we did at Murph. No, that's not happening again. I guess that's not happening again. You know what's interesting about this? I better put my... Yeah? I better put my hot end on here. That's interesting about this. The hot end is not on. I'm not famous. That's kind of an important part of that. We're all famous. What was that? That's kind of an important part. Yeah, I can't print unless we do that. I love the extra stuff. They to give you like the bolts and all that happy stuff. That makes me happy. It's got the juice. I'm onto something. If you have not seen that, if you have not seen the corn kid, you need to see the corn kid. It's got the juice. I didn't realize that's what you were doing. It's ridiculous. But it's amazing at the same time. So good. Oh, there we go. Nope, that's not all right. Let me know what you think in the chat as well. I actually dig these, the sprite extruders on these. I think they're super easy to swap. They're easy to put on. Like I said, swap tick off, put on. They're not my favorite to pull apart as you saw in one of my videos, but they're actually not bad. I liked mine so far. Charging for pit service this time. What do you mean this time? I paid my debts kind of. I think I bought you and your wife dinner when we had wings. Does that count? Because I was like, oh man, thank you so much. Here's wings. That was when Sam wanted me to do the dirty dancing jump onto him. That was a terrible idea for everybody. You tried. Yeah. Uh-oh. I ran into my first problem. You did and thanks. Hey, no problem, man. I'm just giving you a hard time. I really appreciate it. I think the original plan was for me to build, Sam and I were gonna film the build is what the original plan was. So I got the tracks done and all that and then there's not on correctly. Oh, what are we doing? I got the tracks on and all that stuff and then it didn't happen. We got there and we just did not have time. Maybe if I put this on right, there we go. Boom. So that little thing holds your cable, which I'm about to throw up here. Like this, that's the best way to show that. There we go. It's more aimed at Joel too, yeah. Oh, I did, I bought whatever they had on their tab. I don't know what it was. Probably drinks and stuff too, I'm guessing. Whatever it was, I bought it for. I really, I can't even tell you how much I appreciate that. The only challenge with that is now I need to take this one apart and I got to figure it out because I didn't put it together. That's okay. I'll see you down here at your house tonight and we'll get it figured out, right, John? You're only a couple hours away from me, I think. All right. Oh, I'm warm. We are rocking. Low attendance tonight, but that's okay. We had a change in what's going on. How you doing over there, Caleb? Me? Yeah, yeah. I am currently putting, trying to put the hot end to the entry on this thing. The hot end. So this was that little clip I just put on. I like this. It holds your cable nicely there. When you do these, make sure you go under your extruder. Man, wink something. And then on the spray, it does, doesn't it? Actually, it really does. On the Sprite Extruder, this just clips in. You pop these little tabs open. You pop this bad boy in. I don't know if anyone was commenting on that Sprite Extruder yet, but I dig it. I dig it. You pop that down, it locks into place. Your little ribbon cable comes out the back as if you're all the way up like this. Man, I'm running out of time. You are. Mm-hmm. Mm-hmm. All right. Then I'll plug in my filament runout sensor. Dink. We're getting there. If this thing performs like my S1 and my S1 Pro, I'm gonna be pretty pumped about it. Wings have to be crispy. Ooh. I like boneless myself. I like boneless, too. I like regular as well, but I don't get as messy when I eat boneless. I get in trouble a lot for them. But listen, I like my chicken wings like just glorified saucy chicken nuggets. Amen. Extra wet. If you go to Buffalo Wild Wings, if you ever go to Buffalo Wild Wings or most places, if you order extra wet. For real? They will, oh yeah, they'll drown you. It's great. It is phenomenal. Oh, that sounds awesome. Full-size SD card. Thank you, Creality. I love these. Much, much better than the little ones. I have a bunch of extra parts. No, I'm just joking. But I do have some T-nuts. What are these T-nuts for? Do they give me a I? No, that's not it. Uh-oh. Did I miss a step or are these just extra? Sometimes they give you extra T-nuts in case you put the filament run-out sensor. I'm sorry, the Z-stop back in. It doesn't say anything about T-nuts on here. So we're going with it. I see two there. So this is two, four, six, seven, eight, 12 volts. So two on the sides, three to hold the screen on, four on the side of your hot end and you're done. 12 volts. That's pretty awesome. And there we go. A long way from the original Ender 3. Boom. Hard pass on soggy wings. Absolutely no, no soggy wings. Jack in the shop, original, hey, two original Ender 3s and they have retractable cables. That's awesome. That is a great, great mod for the Ender 3 and a lot of other printers. You just grab those retractable badge, what are they called? Little retractable badge holders. You clip them up to the top and then you clip the other part to your cables and when it goes down, it extends the badge and it comes back up and it keeps them all out of your way. It's phenomenal. It's a great way to do that. Okay. What else do we got here? Hot. Ooh, jammin' jalapeno at BW3s. They made them extra wet without me asking. Glenn said he had B-dubs at lunch. You son of a gun. I know, I want some now. All right. I'm not gonna lie. B-dubs fun. I might have to order some after the stream maybe. I know, I kind of want some too. Tomorrow's payday though. Grandpa jokes are gonna get the laughs. Chep's video about the all metal hot end helped my sprite a lot, yeah, for sure. Oh, check this out. Check this out. I'm looking, you wanna blow yours up for a minute? I'm gonna use, sure. I'm gonna use a single stud in... That's not me then. No. Pearl gold. Oh, we got Shane, Chris. Upside down. There's our nozzle. That's fun. Yeah, that looks cool, man. I love that. Let me know in the chat if you think that's hot. He just used Lego studs to create the... It's just a single knot, but there's a hole in the middle. So if I want to, when I'm done, we can... Love you. Do this. Make it look like it's extroiting. Someone says I should take the live stream with me. Yeah, there you go. Someone says I should take the live stream with me to get wings. That would be funny. That'd be funny. That would be funny. So I am officially to, let's turn this bad boy on and see if it does anything mode. No smoke. Oh, before I flip that switch. Explosions. Let's make sure I set this thing for... What am I gonna do for the... Way in the back here. I see it. Want to make sure I set it for me. For USA, probably not gonna blow up on your face. Nothing will just turn on very well. But you want to make sure you're set 115 or on this sticker, it says 230. Make sure you're set for your country because if you were to set the 115 and you needed 230, that doesn't go well usually. It's right in the back of the machine on this one. I'm pretty sure I just swapped it, but I can't see. Of course, because there we go. Yep, got her. So this is actually a pretty awesome build plate here. The size is pretty cool here. What do we got? It's like 300 by... What's your favorite? What kind of sauce do you get when you go to... I'm still on the wings. It's saucy. What do we got? I just want to see 300, 300 by 300. Okay, that's a pretty respectable... I'm gonna be honest with you. I am hoping this is the next size of the bamboo machines. 300, 300 by 300 will be phenomenal. Anyways, my favorite sauces. Wow, let us know in the chat. What's your favorite sauce? Chris Travis hit it. Chris Travis hit it out of the park for me. Caribbean jerk, Asian zing. Asian zing. Honey barbecue. And honey barbecue. And honey barbecue. Yeah, that's my favorite. I usually just order some Caribbean's and Asians. Be like, I need six Asians, six Caribbean's. Let's do this. And they say, sir, please leave. This is as respectable as an ambush friend. I don't know, I just made the numbers up. I don't know what number they come in anymore. This has a touch screen on it. It looks like spicy barbecue. Yeah, yeah. Mango habanero. I have a friend that gets mango habanero. Parmesan garlic. My wife loves parmesan garlic. I don't want to get the shape I want in this game. This show is off the rocker and I love it. We're talking, we're building stuff. That works too. If you're old, it's a rocker, you know. I don't know, I just made that up. You keep making things up. We're building stuff. We're talking wings. I'm going to order some. Louisiana liquors. What? I'm leaving the end of liquor, I barely even know her. And they make you leave. Let's see, please use this here. Touch auto leveling first. Is that too far out? Quick leveling, quick automatic. Let's do this. Leveling. Well, that's great. It's going to do some homing. I'm going to turn this towards you guys here. Let's see if we can get some plastic flowing. This, this, come on. What are you doing? What is this? All right. What's up? What you got? What'd you find? This tiny little sample roll. Come on guys, come on. I thought we were done with those little rolls. Anyways, sorry. It's going down slowly. It's yelling timber I think. No, bad, bad joke. 15 pieces, five of each. Amen. Amen to that. We need wings. Yes, wow. How are you going to hold that spool up? I got to go find the spool holder. Thank you for reminding me. I was just going to, I was just going to hold that spool up. That's awesome. Yeah. Let me just, this is my modified spool holder. It can fit several rolls. I'm going to put it right in there. No. Let me go see where, let me see if I can find the spool holder here. It's got the juice. What? It's got the juice. Yeah. It's got the juice. All right. I don't like that. The song? No, the thing I was doing. Oh. I do not see it in this one. It's got to be in the other one then. Unless it rolled off, it maybe it rolled off my table. Tripod's always on it. I got to chat you after the stream tripod. I got something interesting to tell you. It's real interesting. Oh, I found it. All right. It's way down in there. Let's see if you can catch a glimpse of it. See it way in there? No, no, no, no. Yeah. It's way in there. Don't forget to check your boxes. Make sure you check them. Way in there. Oh, that was close. Not paying attention. Here we go. So it wants me to start. We'll start the auto leveling. For what time is it? We started two minutes late. I got 12 minutes. You're gonna take us two minutes. Yeah, we're taking, we're doing it. So with the printers, with Creality printers, you get your spatula, your scraper, whatever you want to call it. You get with this printer and extra ZM stop in case you want to take your CR touch off. You get another set. I mean, if you don't have a printer, this might be your first set of snippers. A lot of people have a lot of those laying around. You get a little bag of Allen wrenches and a wrench. And then you get a nicer wrench. And if you ever see this, if you're brand new and you order your first printer and you wonder what in the heck this thing is, this is an acupuncture needle. Congratulations, you're starting acupuncture. Is that really what that is? Yeah, so it's an acupuncture needle and they use them to unclog the nozzles. It is not my favorite when these poke you. So if you can keep them in something, do that, that way you don't get poked. Recently, I unboxed a printer. You have not seen it on the channel because I didn't put it on the channel because it poked me and I was mad about it. I was doing an unboxing and they had the needle wide open with no protection in one of these bags. And I'm not good with that. And I decided I'm not filming this. They're wondering why not. I might be getting blown up with emails, but no, I think they sent me one or two. They also didn't send me the printer that they're supposed to send me yet. So Sam asked me if I got that printer the other day. It was the V400. I didn't get it yet. And they might not have given it to me because I'm not releasing the other video that I didn't film because they poked me. That's how it works. The cold pole or torch is better yet. Too far. Electronics acupuncture makes them feel all better. That's right. That would bug me out. Yeah, absolutely. As soon as that happened, I was frustrated immediately. I have the footage. I never even sent it to Caleb. We'll get it. Yeah. 10-inch metal needles hooked up to a 10-inch unit. See now, like if somebody was doing acupuncture, I'd probably check it out. I'd be like, you know, I want to check this out. Why not? I've never done it. I love massages. Massages are amazing, by the way. A massage. Yeah, good old massage. All right, I'm going to give you guys the option of filament for the first print on this monster. It's almost done. This is 100%. It's down to starting. Okay. So it did. It wants me to do an assisted leveling now. Return to the previous menu. Enter assisted leveling and do the paper part. That's what it wants me to do next. So here's the deal. For filament, I have cookie CAD sunset. I have protopasta nebula, which is gorgeous. That's what my photocement is printed out of. We have some polyterra. I have a bunch of, I have filament everywhere. So what do you want to see? What do you want to see? We'll get something gone. Why does that not work? That should be working. Black on black can't see it. Ooh, good point. Bring it, hey, pop yours up. Let me know. Now it's between sunset and nebula. So let me see what you guys want to see. And I'm going to work on the paper method here. I got to come around the side of the table. So it wants me to do an auxiliary leveling now. It's like a glitch. Always keep your paper underneath your nozzle when you're doing this because, well, it's smarter. Smart to do that. We have a line of filament. We have a rule. Yeah. I don't know why I said, yeah, that way that was weird. Oh, I got it wrong. We should have shot him back. Yeah, that's me. This thing is so, oh, you know what? Shouldn't it be out there? I remember I said I tightened all these springs down. Springs down. I'm just doing a quick paper leveling here. Thanks, K2. I appreciate it. K2 said I have a real thick modem tube. Proto pasta. Matt, Akula mountains is on. How are you doing that? Hatchbox. Yes, I've used Hatchbox. Polymaker, orange beach sunrise. I don't think I have that color. I have a bunch of polymaker, but maybe not that color. I have orange filament. Why don't we grab some orange filament? I can do that. I'm trying to hurry up and get this semi-leveled manually, and then I'm gonna run that stupid auto leveling again. Yeah, four, six minutes on your time. We're doing this. Question to chat. Anyone use Hatchbox? I think a bunch of people probably have used Hatchbox. But yeah, I have orange for sure. I remember one video was complete orange. It was the original Sidewinder video, I'm pretty sure. Cause I remember that because I just gave away all of those 3D prints to some of my cousins and uncles, or my uncle and some of my cousins cause I brought them some printers recently. Also, here's proof of orange. This was done on the X1 Carbon. This is the Maker Muse Torture print here. I can't remember the exact name, but it gives you the tolerances. And I just want to point out 0.5, 0.4, 0.3, 0.2, and 0.1.5 all moved right off the build plate, which is unheard of. I mean, not very often. Is it unheard of? Yeah, it doesn't happen very often. Straight out of the box. Rainbow glow-in-the-dark Hatchbox. Everybody saying good things about Hatchbox, which is great. What are you modeling in Caleb? Program called stud.io, which has a full library of pre-modeled Lego bricks and wiggly bits. And I'm trying to get the wiggly bit working. Wiggly bit? Yeah, you see the... So I'm trying to get the section at the back that's got the cable whip. I'm trying to get that set up here and it's just this wiggly tube and I'm trying to get it to connect it. It's not connecting. Wait. No black or white. So in true fashion, I went through and did this one time. And when you go back around, it's inevitable that your front corners messed up. You got to go around two or three times on these to make sure you're pretty solid because when you move one side of the plate, the other side moves with it, you know? And that was a pretty cool hand gesture I just did. So just to keep that in your mind. Did you guys see Sith Lord Britt's interview? That was pretty dang awesome. No, what are you talking about? Was it Sith Lord Britt? Yeah, I'm pretty sure. Wasn't it Britt? Now I'm second guessing myself because I just said that out loud. Yeah, I think she did an interview. Matter of fact, I'm pretty sure I just commented on it. It's terrible. Well, I can't see a lot of other people's chat. That's because we're everywhere. We are literally on two YouTube channels, at least one or two Facebooks, I can't tell two, and then on Twitch as well. So, yeah, yeah. So, we usually broadcast all over for the HotMakes. Nice. Oh, I got it working. We're almost there. I got the wiggly bit. You got the wiggly bit? I got the wiggly bit working. We're... CRC, long time since I stumbled upon a live stream. You know, nice to see ya. This is a HotMakes. We usually do a completely different show than this. It's every Monday, 6 p.m. central. So, if you're around, jump in. We'd love to have ya. Tonight, we had a random last-minute guest change. So, we went off. We threw in the Plan B and C. And this thing is wiggle, wiggle, wiggle, wiggle, wiggle, wiggle, yeah, one more. And we're doing something completely different tonight. This is the Ender3S1 Plus. 300 by 300 by 300 uses this sprite extruder. And... There, maybe that'll help. We're pretty dang close there. I'm gonna call this good enough because it does have CRTouch to help compensate for my shortcomings. I'm gonna call that... Wiggly bits and big Bowdoin tubes, demonetized. Yeah, yes, yes. All right. Oh, man. So, what won? I need to go back in the chat. I need to go back in the chat. We should have a timer on the screen. And I need to see what won. Was it Nebula or Sunset? We're doing that. We're gonna do, I don't know what we're gonna do. I wasn't too far away. I'm pretty close. What's that? It looks like a printer. It is. You know, that's not bad for a little bit. Wiggly bits and Bowdoin tubes. I love that. Wiggly bit. That's like, what is that? Dirty bit? How far away do you think you are from getting that thing going? Doc, a couple of minutes. Okay. I'm gonna keep going until you're done. Yeah, we're gonna do this. I think you definitely won. I'm definitely not gonna have this thing done by the time you're done, but... This is Potopros... Potopros... Protopros. Potopos to Nebula. That stuff is gorgeous, by the way. It is what my Photos Mint is made out of, and it is beautiful. Go, go, go, go. I'm just gonna do a leveling because I just did that whole paper thing. I have no idea if their Slice G code is set to do the leveling before or not, but, you know, we'll find out in a minute. That's a, it's an amazing array of colors, we'll call it, blues and purples, and trying to think, what else did I print in that? Thought I did. Nope, that's the Cookie Cat. Cookie Cat's sunset was freaking great as well. What did I just print in Nebula? That little guy. I just printed something else. I don't remember what it was. Doesn't matter. Currently. So what do you mean? Let's see, man, those probe settings, yeah. They're very conservative, I would agree. Pretty slow. Definitely a little bit slow on those. Let's see, let's see your model print. We're gonna, oh yeah, that would be cool. That, you know, it would be awesome if I could take that, like, Lego model and export it as an STL and print it. There's probably a way to do it. Well, okay, so there's a website, I forget what it's called, but it has a library of all of these CAD files for bricks. So there, I mean, there are some people who just, for the hell of it, like it's not actually really cost effective or time effective. They'll print individual bricks for a Lego set for all the pieces they need. And they'll build a 3D printed Lego set, set brick by brick. So you could probably download that and then just like combine all the pieces to make one solid object. Right. That would be pretty awesome. That would be pretty cool. That would be a lot of time, probably, but. There was a YouTube video I saw a long time ago where somebody did that and they actually compared time versus cost. My guess is it didn't compare. Conworm. What is happening? Where is my mouth? Is there a corn? I think there's corn. I like corn. I like corn. All right, really quick while we're talking, I just want to throw this out there because we're towards the end of the show. Thank you guys so much for being with us. We're going to get this thing printing before we go. It'll be a record for me getting a printer printing. But before we go, we got some awesome guests coming up next week. John from Proper Printing will be with us. That, that's going to be a super fun show. You'll have to figure out if we were prerecorded it or not. You never know. Spoiler alert. Spoiler alert. But we'll be here with you with John from Proper Printing next week. October 3rd, Sam Printus and maybe Nick from PolyMaker. We're going to find out if Nick will join us. No, I talked to Sam literally today and he confirmed that Nick will be there. He will be there. Yeah. So it's not a maybe anymore, Nick. No. Yes, we can't wait to see you. On the 10th, I'm not sure if we're going to do a show yet. It might, it might be a show from IRF Live. We're going to find out Joe, a 3D maker, new also breaks and makes is going to be out there and he, we've been tentatively talking because he's going to be in the US about just doing a show live at IRF, which will be a lot of fun. Print. Come on now. A cat, a handle, a rabbit. I guess we're going. It sounds like you're trying to figure out what's on the little screen in episode one when they're testing Anakin, a ship, a cup. I am right. It's just what whatever was on, that's probably way too hot. Let me see. Nice. It's whatever was on the card. And then my hair definitely just got stuck in my light as I walked by. Nice. I may or may not do that like every time I walk by. Let's see, what else we got? The 17th of October, Mod Bot will be joining us. The 24th, Walter Miss Prime, Walter will be joining us. That's going to be a great show too. The 31st, Devin from Make Anything. And I believe Mix Media Girl will be with us as well. And we're going to do a Halloween pour. That is Halloween night. We might be a little early on the show starting, but we're going to do a Halloween pour. We might get some cool Halloween stuff and pour, the acrylic paint like we did last time over like the canvases and the Halloween stuff. It's going to be a lot of fun. Marcy and Mix Media Girl, Devin from Make Anything and that's on Halloween. And then we got some more fun stuff coming in November. We'll get to that when we come. How's it going by you? I am getting some decent progress actually if the cat would stop crawling all over my keyboard. The cat's in the keyboard and the silver. Silver mouse. Hey, all right. So what do we got here? This is a Ender 3 S1 Plus. We just unboxed it and set it up live. And I took a lot of time talking to in the last 45 minutes here. Those wheels are red, right? Print your own LEGOs that I should. Can we see that sunset? That's what, oh yeah, yeah. You want to see the sunset. I'll grab it real quick. New email. I love new email by the way. Caleb just won. He might have, let's see. Put the kit on. I'm getting close. I'm sure it would fit. Interesting. Getting close. Interesting. Power and a control screen, Caleb. They're calling you out. I'm working on it. I'm getting there. Power and a control screen. Where's the power supply? It's built into the bottom on this one. Okay. So it's in there. I'm building out the bottom. We'll pretend it's in there. Yeah. That's fair. No screen though. This is the Cookie Cad sunset. Great filament. This stuff is gorgeous as well. If I can get it to stay, it's not gonna. I'll just put it like that. So I have a lot of stuff over here printed in that. I just did a video. This little turtle guy that's printed in that. Waiting for this thing to start. Oh, you know what? Okay. I guess you probably need filament. I'm not too far away. I think I'm gonna get there. That's what she said. Nice. Yeah. This thing, Holmes, I just wanna get this. I pushed out a little bit of filament here. Good thing I paid attention and I didn't load any filament yet, right? I'll grab some more stuff with that sunset. Get this. What is going on here? Oh, the bed. The bed is only at 55. It needs to get up to 60 before we can print. We are so close here. So stinking close. I know. I can't believe we're actually coming down to the Y. I might actually pull through. I think we're a couple minutes late, but I'll get over it. This right here is in sunset by Cookie Cad. If I can set it up there, geez. And this mug is from another part of that roll. You can see it's light on the bob and light on the top where it was gonna start transitioning. And this mug got a really nice part of the center of the roll there. Really cool transition roll from Cookie Cad. Their filament is great. This nebula, also gorgeous. I remember now what I printed with it, it's not here. I printed some lightsaber blades for our 3D printing world lightsabers. And they came out great. Let's see. Let's see. Jim, you owe me an apology for making me impatient. My impatient self die waiting for my X1 in order to Kickstarter after you let me check out yours at Murph. Sorry, Joel. If you ordered it, it'll be here soon. Hopefully very soon. I think over close to half or something like that have already shipped. They just updated that again. They're sending by the end of October. They all should be delivered, delivered. CRC was waiting for me to print in the air. The top speed on this printer, who knows, to be fair. I just wanna make sure we're even close here. We're not even close. What is going on here? Let's just print all. Oh, come on. This thing is so far off. Not even close. Oh my gosh. I'm getting there. Yeah, well, I'm not. I just have to pick a tile that looks the most like the screen. Jeez, this is rough. The Z was way up. Let's see what it does. I don't know if it's going to recover. The one thing I don't like about the sprite is that you can't see anything, by the way. This one comes in black. So I think I'm going to go with this one. Maybe. I think we might have saved it. We're going to find out in a second. It's terrible, but it's printing. It's printing. That first layer is absolutely terrible. So. Dang it. It definitely got it printing. It's printing now. I might have to check that out. The default probe offset, I need to see what's going on there because it definitely was way up. Way up. And I can't go to settings to save it currently, but I'm just going to go with this so that it can be done. Let's see what the instructions say. Maybe I missed that far. Joel, I can't wait to get your printer, man. Are you going to love it? If you are in the chat still and you have an X1, let Joel know how much he's going to love it. I know a few of you out there have them. Yeah, it doesn't say anything about adjusting your Z. Let's see, return. Of the Mac. Yes. Ooh, buddy. It glazes right over it. At the bottom of a sentence, it says return to check your Z axis value. So there's that. I just didn't read it. So yeah, we got this thing rocking and rolling in 50 minutes. We'll call it. Now, OK, it's been less than more than 50 minutes. Nice. That's funny, Joel. Sergio says he's going to love the X1. So it's going, it's printing. My guess is the bunny will print. It looks like it's going to stick down. We'll see. But you can see here by this purge on the side, it wasn't good. But yeah, so we got through it. We're about 15 minutes late here, but we did it. But we did it. We came up with a random episode. Let us know in the chat what you think. I know this was completely random today, not like we usually do. So let us know what you thought in the chat. I actually finished mine. So if we just give it like a few minutes, I'll render it out and we'll be able to see the finished. Yeah. Well, while you're doing that. We both ended up finishing. That's what she said. So while you're doing that, I just want to say thank you everybody for sticking around. I know we were supposed to have a guest and we usually have a guest. Just we changed plans tonight, but David Hewlett will be back with us November 21st is when we can reschedule him. We got a ton of great guests up until then. If you're going to Earth, we will see you there in a couple of weeks. It's going to be so much fun. I hope to see everybody there. If you see me, come up and say hi, introduce yourself if we haven't already met. Or even if we have, because I am terrible with names, by the way, with faces. So come say hi. Don't forget they're doing the, let's see here, Greengate 3D is doing the spool recycling contest. So bring in as many spools as you can get a hold of or as little as whatever you can get there. Whoever brings the most, I think is going to win, not this printer, but the Ender 3 V2 Neo. I'll get that unboxed probably in the next couple of days or this weekend and we'll do that on my channel over at the edge of tech. What else do we got here, Caleb? So. We're almost there, it's rendering. Next week, John, proper printing. That'll be a lot of fun. Someone says I'll be there, awesome. Joel will be there. And I know a bunch of cool people. Everybody that shows up is going to have a blast. It's a totally different event than Murph and it's so much fun as well. You're going to love the organization and all that of Earth, if you went to Murph. Let me think, what else? Thank you, Creality. This is the Ender 3 S1 Plus. I appreciate you sending it over for me to do a first look. I definitely appreciate that. If it performs like the S1 and the S1 Pro, I actually am going to probably toss this in rotation for bigger stuff. 300 by 300 by 300, it's pretty solid. I don't really print much bigger than that. So I think that'll be great. Jim, you're flying to Earth, right? I am flying, yes. So you're not going to be driving through the Amish country so you can bring donuts? You know who will be? Tripod, if you're still with us, he's driving. That would be amazing. He shows up with Amish crack donuts. This is your destiny, Tripod. This is what you were born to do. No, Amish crack at Earth, no. They have Wawa, yes. They have a gas station kind of thing called Wawa. We have trip trips. It's very similar to our quick trips. But they have a lot of cool stuff in Wawa. Yeah, yeah, something. Well, a quick trip is like, I don't know, you can get everything from food to groceries to all sorts of crazy stuff there. Oh yeah, we have come and go. It's probably similar. Wawa is very good. If you guys remember Narisse, he's another guy on YouTube and he was from around that way. He always talked about Wawa. First time I got to Earth in 2019, I was like, oh, this is a Wawa, all right. Their tea is great, by the way. QT, there you go. Anyways, we got this rolling. It is printing. Again, thanks to Criotty for shooting this over. I will do an unboxing of the Ender 3 V2 Neo this week, either this week or this weekend, we'll figure it out. And that one is the one that's gonna be coming to Earth. And maybe I'll bribe Tripod if he has any room. I'm not sure. We'll figure that out. But bring your spools, recycle. It's awesome. A bunch of prizes are gonna give away. Someone who ever brings the most amount of spools isn't gonna end up with a printer. And they have a ton of other prizes for Earth. We're gonna have some fun with that. We did at Murph as well. Check us out next week. I said that six times now, John will be here. I was killing time until your render was done. I know it's, I don't know how long it's gonna take the render, but it's like, I have a feeling it's gonna finish right as we end the stream. Yeah, that's usual. So everybody else, like I said, let us know in the chat, what do you think of this idea? This was completely random. I was just like, hey, we wanna do something different today. So yeah, that would be pretty chill stream. You know what? I'm impressed. You got that unboxed and it's literally printing right now. It's literally printing. Well, within an hour. Within an hour, yeah. Well, yeah, kind of an hour. Yeah, no, we started late. We started at like 6.15. So yeah, an hour. Yeah, yeah, which is great for me. Something to note on this, it does have the flex plate and there is two bolts in the back that have notches and the flex plate sits into those notches. So you put the plate down correctly. I like to have a lot too. Yeah, we got the proto pasta nebula running right now. So it's gonna be the best ding bunny we ever saw. Mom says, love it. Thank you, mom. Fantastic. Ooh, Amish market near me. What should I bring to Earth? How many printers have I put together? I don't know. I don't know. I'm gonna be 100% honest with you. 30 or so, right? Yeah, you have least. It had to go back. I don't know. I give so many away. I just don't have the space to keep everything. In the last month or two, probably month, month and a half, I've been giving away six printers. But I give them to people that can use them. Like people that didn't have them before that want to get in the hobby. I love seeing that. You know how it is when you get your printer and you get your very first print and it's like, I did that, it printed. I don't care if it's this bunny or something you printed. The first time you pull something off that build plate, it's like, man, this is awesome. That's a sweet message. It's been, let's see it. You might have to read it. Oh, it says in case it's a long time since I happened to stumble across the stream again, thanks to the time zones. I hope you, the misses and the little one are doing okay and continued. You're okay. Smile. Thank you. I appreciate that. And I look forward to seeing you soon. Time zones are crazy, but you jump in anytime, anytime. And thank you for that message. Little guy's doing great and Lindsay is as well. What time is it? 721, all right. How's your render? I was trying to kill more time. I know it's not done yet. All right, can you post a picture? Yes, I'll post an afterward. We will post the picture to the HotMakes on Twitter and Facebook of Caleb's Render when it's done. This is the classic Creality bunny. I may or may not stop it. I'm not sure what I'm gonna do yet. But everybody, thank you guys so much for being here. We will see you again next week. I know there's some really good streams after this. Also, don't forget to check out Maker Deck. If you've not checked out Maker Deck, search Maker Deck or go to Twitch and search Maker Deck. It is super fun. You got to watch printers printing. You got to watch people making stuff. There's no audio. So it's just like hanging out, watching, throw it on a second screen. Schools are dropping it on their screens and maker spaces as well. So check out Maker Deck. Let's see, go ahead. We have a render. Yes, all right. I killed enough time. Yeah, I only one of the photos rendered, but, let me see if I can pick this one up. Is it a Poochie head this way? It's definitely wobbly that way. This is a sit stand desk that I made myself. There you go. That looks pretty good, man. Let's see if we got the little screen on it and I even put the little wheels on there. Orange wheels, orange wheels. Yeah, you got the filament on there. And I love that it's all made of Lego. Yeah, you got the, you're extruding a little bit and it's pulling down there. Oh yeah, I'm pretty proud of this. I'm glad I did that in an hour and only slightly after you. Yeah, about an hour. I say post that anyway. There's a second picture rendering, but we're not going to wait for that one. Yeah, yeah, post both of those because we want to see them. I'm going to. That is super cool. I'll even tag the show. We can show it off next week. So if someone wanted to order and make that, is there a way they could do that? Yeah, absolutely. Maybe you could let us know, because that'd be really cool. So maybe someone out there says, you know what, that's pretty cool. Caleb digitally created this. I can order those Legos and build this and then tag HotMakes in the picture when you're done. There are, as far as I could tell, because I try to build like this, there are no pieces that are not available in the colors that I built in. So this should be completely orderable. If not, it would be easy to swap out some pieces. Do it. Someone out there is going to do it. I might do it too. So point us in the right direction. That'd be super cool if we can order them. This bunny is coming out awesome. I love this filament. Nebula by Proto Pasta, phenomenal stuff. Thank you so much, Proto Pasta. I know I bought a couple of rolls at IRF and then they gave me a couple to try to. And I think this is one they gave me to try, but I bought Joel Hi-Fi Blue and I bought the Amy Double D color. Was it Blood of My Enemies, I think? Oh yeah, I think that's what I'm called, yeah. Yeah, so, and they gave me two other rolls, this one and another one to try out as well. So that's awesome. But everybody, Joel Finn says, I'll definitely order that for my son. So post it, check out the Facebook page and order the Twitter and we'll get it on there. But everybody else, thank you so much. Thank you for staying late with us. Go check out all the other cool stuff coming up after us and we will see you again next week where we bring John from Proper Printing. There we go. I'm super pumped for that. See you later, everybody. Have a good night. Later.