* Light duty ring saw, using the same technology found in the Revolution wet saw. * The tool's cutting blade is a veritable "ring" of stainless steel whose 360 degree surface is completely coated with diamond grit. * You can feed a piece of wall tile or glass into the blade from any direction and get a clean, accurate cut. * Since the blade cuts so precisely, no further grinding is necessary. * It produces finished cuts with intricacies that are impossible with conventional cutters. * The tile shaper is portable, as it is easy to lift the motor and saw housing from the basin. * Tile Shaper Separating Blade sold separately.
Taurus 3 Blades * All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials. * All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn. * Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.