 Hey guys, Shea Bear 1000 here. I've had these vents I've been wanting to put in the shed. Up here so it can breathe. I'm gonna put one in the front, one in the back. I've had them for a while. It's high time we put them in. Let's do that. Like I said, we got these, they're sidewall sealing vents is all they are, but they open and close. So what I'm doing, I have a fan in here running, trying to keep the heat out. This thing gets like an oven in here. Like you would not believe. So what I'm gonna do, so I'm gonna put these vents in here. I'm gonna put one on the right side and front one on the right side and back. So it's kinda like a cross, cross breeze. And what we can do is we can close it in winter time. And in the summertime we can open it. So that way it'll get, it'll let the heat out. And in the winter time it hopefully won't be as cold. There's really nothing in there, it can hurt, but you wanna try to keep it from getting moist in there. This is a steel shed, so you're gonna have condensation and stuff like that. So what we're gonna do is we're gonna open these up. Comes with a couple long screws, but we're not gonna be using them. What we're gonna use to put these in is I got these self-tappers. Now it's kinda got like a little overhang up there so I don't think we're gonna have to put any caulking on here. I was gonna use that window putty, but I got two things of it and it's both dried up, can't use it. So I'll check it when we get a hard rain and if it looks like it may be leaking, I'll just put some caulking around it, it'll be fine. So let's get these opened up, we're gonna measure a hole, we're gonna cut it out, I'm just gonna use my angle grinder. All right, so we'll get these put in. So let's get them opened up first. Okay, sorry about the shadows, kinda hard to get somewhere out of the sun here. We do have some shade, but it's four by eights of what you cut the hole at. So you're gonna cut it eight inches long, four inches wide and then they put the screw down in here. See, this is what they give you. They give you these damn things. Because it's meant, like I said, to go through a wall or a floor. But so we're gonna cut the hole at eight inches, which seems like it may be a little shy. Eight inches will just do it and then four inches wide. Okay, what I was gonna try to do was I've got a marker and I was gonna try to get my marker up there and just mark it where I need it to be. But what I'll probably do is just get up there and mark a couple corners and then measure from there. I think that's probably the best way to do that. So, yeah. So I'll put it in like this and then it'll help suck the heat out. Or should I do it like this in case the rain blows in? All right, it doesn't really matter, I guess. It's whatever's easiest to reach up there and flip it. Okay, so let's get over here. Let's get these marked and measured and we'll start cutting. Okay, you're probably not gonna be able to hear me very well because the camera's actually back and zoomed in a little bit. But Tuesday, after Tuesday, we shouldn't have that problem to worry about. So I'm just gonna hold this up here. I don't know if I can do this or how I'm gonna do this without getting in your way. It's gonna be about right here. And I know there's nothing behind here, so I'm not gonna get you moved over here. See if that'll help you in. I'm gonna kind of bring it up here, about right there. And look at this, this never needs to go down. Get that bullshit. What I'm gonna do is measure up four inches. Now I did forget to bring a straight edge out. I better go get me a straight edge because I'll mess that up. Okay, guys, I'm back. I got this 16-inch level here. And I'll use that so I can make sure, make damn sure that I'm level. Okay, so I know it looks crooked from where you're at, but that's the rooftop making it a little and the camera's at an angle. So let's get our deal here right across here. Same way with up and down. Level here for up and down. You can make it a little bigger if you want because there's plenty of room to cover up. That's why what I should do is drill a hole in all four corners. But I think I'm just gonna try to plunge cut it. I think it'll be all right. That one's a little off, but it might not be. So that should be our hole. I'm going to hold this up there and see how close it is. Should be okay. Grab my angle grinder and let's start making some noise. All right, I changed my mind. I did bring, so I'm just going to go ahead and drill them out in the corners. I didn't bring my center punch though, should've. Now let's get the angle grinder. Careful with these cutoff wheels. I've never had a buffing wheel or like a grinding wheel, they'll break too, but these will really break on you if you're not careful if they get out of bind and they'll fly apart. How does it work one day and that happened? The guy I work with, he's kind of like a goober. He was supposed to be holding a piece of steel for me. Well, he let it pinch and almost cut my fucking fingers off. So I had to call a monkey and she had taken me to the, there's an urgent care down there by where I worked and they checked me out and cleaned it all out and did their things. But it took her over an hour to get there because she was so far away. But I went ahead and kept working until she got there. So just be careful with these. Now those buffing wheels have never had one of them come apart. I've had the labels come off of them. That'll scare you. Here we go. Got a lot of sparks flying my way. Let's see if it fits. Let's put some screws in. Believe it or not, this is love. I'm gonna show it to you. Once we get the screws in, I got the screws I get to grab my little impact driver. Hang on. Okay, we got this. This is still working great, guys. I did a review on it a couple of years ago when I first bought it. The only issue I have, about a year ago, there's three LEDs in there, two there and one there. They quit working. So I don't know what that was all about, but now let's make sure that we got it level. That's money there. I'm gonna hold this here. So that way, it doesn't move on me. Let's put some caulking in there. Now I'll bring you up here and I'll show you. See, it does look crooked. That's because of the roof. But let me bring you up here and I'll show you. It is level. I mean, just an old shed anyway, but it is level. I'm gonna go around back. We're gonna do the same thing, but I'll just speed you up, okay? Because you kind of know what we're doing. You get the idea. I'll just go ahead and speed you up and we'll go from there. I don't know if the camera's picking it up, but I can see the heat waves coming out of there already. So, all right, let's go around back. Hey, storm, thunder, lightning. It goes in the garage. I gotta make room for, or you gotta steady. I don't think it's working. Her mom told me it's always done that sometimes. You know, be going on it once it'll stop. You put it in neutral. It's just electronic switch. You put it in neutral, back in the gear again. Right there, let's go into reverse. If you go slow, it's moving. Go back in to neutral and forward again. If you guys ever had this problem, let me know what it is. It would save me some time of, you know, hunting the problem down, agnosing it and process of elimination and all that. I'm thinking it might be, there's what they call a speed control in here. Might be that. I don't think it has anything to do with the batteries because monkey bought batteries for a thing for them five years ago and after the new batteries were in. So let's go in the garage for a minute. Stand in front of the fan. Okay guys, so we've got something else accomplished anyway before the rain is supposed to rain this afternoon. But I'm going to, I'm gonna, sorry I got the fan on, but it's devastatingly hot. So, you know, I'm gonna pick up my tools and everything because what I'm gonna try to do at least once a week, maybe twice, maybe three times, depending on how I'm feeling, but at least once a week, I wanna do a late night shop night, like towards midnight or later, where we can just do a quick, you know, project or something that only takes a couple of hours because I'm up, you know, I'm up until I usually don't go to sleep. I usually don't turn the TV off until three to four, sometimes five, sometimes I step all night. I've always had trouble sleeping. Back in the early 90s, I was diagnosed with, shit, what do you call it, when you can't sleep. Now I should be diagnosed when you can't remember. But like in one year, we had to keep track of how much sleep I got. Insomnia, that's what it is. And like in one year, I had like 85 hours of sleep in 12 months. And, you know, your body keeps shutting down, you know, when it's like that. But I figure, you know, that's a lot of wasted time. So like things that don't get done during the day, you know, little projects that I can do in an hour or two, upload a 20 minute video or whatever, at least I can get those done in between other stuff that's really important. So that way I'm kind of killing two birds with one stone and I'm not wasting all that time just sitting in front of the TV watching YouTube. I love YouTube, I love watching you guys' videos, don't get me wrong, but, you know, I'd rather be doing something, you know. And I think I may start tonight. I got a little project, it's not gonna take long, but it'll be midnight or after, I'll show you the clock every time. So, anyway, that's what's going on with that. Package I'm supposed to get Monday. I got a, what do you call it? A notification. It's gonna be one business day later. So it should be here Tuesday, which is not really late because it's still actually gonna be, if it comes Tuesday, it's gonna be five days early. So can't complain about that and I can't wait, you know. So, to get that video on for you guys, so you probably see it Tuesday night. If it comes in Tuesday, you'll see it Tuesday night when I upload it or Wednesday morning whenever you guys watch the videos. I'm trying to get back to where I can get a video up once a day. I know sometimes I'll upload two or three a day that I could wait and upload them, but I like it to be as close to real time as possible. You know what I mean? So like if I say it's the next day, it's the next day. You know, it's not like, like there's a guy, I love this guy's channel, it's Redneck Restoration. He's really cool. He works on old like 55, 56, 57 Chevy pickup trucks. He does other things as well, but he does different stuff like that and he does it the Redneck way. Like me or you would do it. He has a minimum amount of tools and that's what he does. And he'll say, I know I'm not supposed to do it this way, but it works. He's a guy that always likes his torch. He says, never late, you torch that way. So you've heard me say that a couple of times. Well, I'm referring back to him, but some of his videos, he does a question and answer and he said sometimes it'll be like winter and you'll see the sun's out or you'll see it's, you know, the sun's out. It's hot at summertime. You'll see me wearing a coat or you'll see it's snowing. He said, that's because some of his videos are archived for two years. I don't, you know, I don't want to go two weeks, you know. So I want to keep it so when I do three videos in a day, I want to get them uploaded, you know, that day. I could stretch them out. I mean, I might do it if it was only a day or two difference, but like I said, I want to try to keep it in real time as possible so you guys know what's going on. Well, anyway, enough of that. Thanks for joining me. And like I said tonight, well, I know you won't be here with me, but you'll be here with me in spirit. Hopefully I can get the, I'll be out here, it'll be out for midnight and we'll do that little project. Like I said, once a week, I would like to do that and just for something different. And like I said, I don't sleep anyway. Might as well use that time up and then maybe it'll help me sleep better. At least that's, you know, one less thing off my mind where I'm laying there, a lot of times I can't sleep because I'm going, man, I got to get this done. I got that project to do. You know, this is important and I'm trying to get my game plan ready for the next day and next thing I know, you know, it's five o'clock in the morning and I'm like, damn, I ain't getting sleep. So anyway, I'll do that project. Like I said, you'll probably see that because by the time I film it, I'll edit it and get it up and get it posted, published. You guys probably won't see it till Saturday. That's like if I do it on a Friday or Wednesday, you won't see it till Thursday. But you get the idea, you'll know I'll do a different intro for that and it should be pretty cool. I'll show you the time every time. Sometimes it might be later, sometimes a little sooner, but it's going to be around midnight. So anyway guys, thanks for watching. I appreciate it. Monkey's work today. She's got a long day today. So, oh, and one more thing. Now it's in your head too. Shea Bear, the man of legend. Gone for now. Weekend's here guys. Be safe, have fun, enjoy life. Makes the best of it, right? We'll see you guys soon. Bye-bye, take care.