 Hey guys, Shea Bear here. It is about eight minutes after nine Let's work on the scooter piece of line here fuel line that broke off of this scooter Well, it came off of the The Fuel filter want to pull it a little tighter to get it on to the filter. I broke it off So it comes from this side Goes over here on this side somewhere. So what I'm going to do is I'm going to pull this This piece out which the whole seat and everything will come off of it and then we'll get a look at what's inside of it Okay All right down here there. So it goes on this end and then right up in here Let me turn a light on can you see that? That's where the other end hooks on to that's the bottom of the tank So I won't have to pull the tank. So I just got to come from here to here And it looks like See that line how cracked it is. Let me zoom you in a little bit here. It's how cracked that line is that's from heat So we're going to replace that section too All right, we've got our line on up in there. I wanted to show you something on this filter No, it's it's clean. See there's letters on here It says flow. Can you see that with an arrow? You're going to want to flow to come from the tank into this side Okay. Now, let's get you set down here and let's get this this line put on here Shrink after a while too. So give it a twist and keep twisting till it goes all put these lines in In some warm water or set them out in the Sun Whatever the case may be and they'll go on a lot easier tight spaces here. That's some warm water I got the other one soaking in some warm water. That should go on a little bit easier So let's try to put that in on and you guys see that if you can see it Maybe through there we get my finger on it I'm going to try to get you up here try to hold you here Let me find a bar up there. You can feel when it's all the way on and saw the way on give a tug There it is fuel in here because I got it in the garage I didn't want fuel all over the place So I'm out anyhow because it has to pump. There's a fuel pump on here And that's what this end went to was the fuel pump now. It's got mine right here when it's When this thing when you're cranking over when you're running it it creates a little vacuum and it goes Just like this and it opens and closes that's like a little valve in there it opens and closes it and lets fuel Come down into this into that line into your carburetor. So that's how that works now I've got to get I've got to take this off because I don't know what happened to my clamp my breather tube and I got to soak it in warm water to get it back up on there and So my clamp will fit on there. So that's why that's off there, but That's how you fix that leak now I did this video because I'm going to show you how I cut and edit and yeah, I still 95% of the time 90% of the time I still use Windows Movie Maker. I know it don't come with with Windows 10 anymore, but I went on online and I found it Now I use it most of the time on these videos because I don't need any special Effects, I don't need to zoom or anything like that If I got to do anything special like with the other cameras when I have to make them full screen because so that way You don't have the black bars Then I'll use I'll use my one of my other editors But which is cyberlink. It's a power director 16 So it's it's a good it's a good editing software, but just for stuff like this. I just use Just use Windows Movie Maker. So I want to show you how I cut and edit and Then we'll go from there. So anyway guys, thanks for watching. Shea Bear the myth man legend. I'm gone for now Bye bye guys. Take care