 In the market for a coffee table, so are we like the ones that world market so do we so we copied the coffee table For 50 bucks a coffee coffee table Hey, it's Kim and Garrett and today we're gonna make a coffee table Coffee table up. We're remaking a coffee table. Yes. We're remaking a coffee table So we originally saw this coffee table at world market Cameron coffee table the Cameron coffee table It's country style table. It was like 280 bucks at world market, so we originally built it last year since then we built a lot of stuff and we've been standing at Briar smoke this coffee table was stand gray And it just looks like a big sore thumb in the middle of the room So we took it apart and we're going to Refinish it we did a lot of sanding and now we're going to show you how we put it together. All right, let's get started Let's get started. All right. This is a pretty big project. So our materials list is pretty big We'll slide that in right here And then we'll drop the cut list in over top of it so you guys will have that too We'll give you a minute. It's big Top support two legs and a 28 and a half inch top support board using our 1 by 3 and 28 and a half inches and our 2 by 4 is a 16 and a half inches We're going to inset this top support three eighths of an inch and then attach it to the 2 by 4 using the pocket hole screws Side done side to almost done race using your 2 by 2 These you'll put the pocket holes down Facing underneath of the coffee table and then they will be flushed to the front of the support But an inch and a half up from the bottom Did you get all that got it flip them over? We're going to attach our 39 and a half inch One by three side graces and then you're gonna set these inset these three eighths of an inch as well All right almost done Step 4 2 by 2 supports you want the pocket holes Facing up while you install so that they will be facing down when it's turned right side up Now we're gonna add the bottom support 2 by 2 brace and it is 43 and a half inches long and I'm pretty sure Just to make it fit. Yeah, you just need some love and then it's just gonna go flush to the bottom 13 and a half inches on either side Hey supports, we'll use the one by fours at 31 and a half them with an inch and a quarter inch brad nail Okay, so we're going to use sleeves of nails as spacers. So just a little bit of a space In between each of these boards to keep it exact So it's got a little tiny head on it. So it makes like a perfect spacer Attach attach these top supports 29 and a quarter and they are gonna come in from the side of the 2 by 4 11 and 5 eighths almost done Almost done step 8 is to make the top. So let's take this down so we can show the top We drilled all those pocket holes I showed you earlier and we just glued and screwed them together That's it. We did facing down and we leaned on top And we leaned on top of them while we were screwing it in so it'd be nice and flat on top Don't get me wrong. We had to do a lot of sanding after that too So this is using six two by sixes at 48 inches. Oh, right Okay, so step nine is to attach the base to the top So we're gonna put the base on the top and center it All right, it looks like we lift the three quarters of an inch Overlap from the top all the way around inch and a quarter pocket hole screws. This thing is going nowhere Let's start screwing. Oh, we need now a sanding and staining camera on coffee table coffee camera Copy table coffee Cameron copy coffee table market Cameron copy coffee table. Wow