 Γεια σας, είμαι Vicky, εδώ και καθώς ήρθατε στην δεύτερη εξογραφία του CREATE 8 για αυτό το μήν. Είμαι εξογραφός στάμπσης και στάμπσης από τα τελευταία εξογραφία μου από τα τελευταία μου, και για την πρώτη εξογραφία που σημαίνω σήμερα θα χρησιμοποιήσω αυτή τη στάμπση. Έτσι, αυτό είναι το X & O και μπορείς να πάρεις ποτέ σε στάμπσης όπου θα πάρεις τα κομμάτια, τα τελευταία, τα εξογραφία, όπως η γραφία για το τικ-τα-κτώ. Και υπάρχουν λαγές εξογραφές, καλύτερα για τα εξογραφία, καλύτερα για το Valentine's Day. Τώρα, υπάρχουν δυσκές πίσες και πίσες αν θέλεις να κομπιένεις με αυτή τη στάμπση και καλή δημιότητα για όλα τα κομμάτια, γιατί υπάρχει αυτό το μικρό πόδι που είναι μεταφακτικό με πλαστικές πίσες που έχουν πολύ τη δημιότητα και μπορείς να τα βάσετε μέσα σε αυτή τη στάμπση και υπάρχουν also πλαστικές πίσες, like O & X, και πλασστικές πίσες όπως τα τουλότητα, στην εύκολη και η μαύρη. So there are lots of options with this stamp set. You can use the plastic grids to go dimensional or you can just stamp and go totally flat or even you can use the matching dies just mix and match all the different pieces and have fun with it. Now there is also available this frame square and die that you can combine with these plastic pouches στους φρέντες. Λοιπόν, αν θέλεις να χρησιμοποιήσεις και να δημιουργήσεις το σχέδιο σχέδιο με το τυκ-τακ το inside, μπορείς να δεις ότι είναι καλύτερη εκεί. Τώρα, από τα σχέδια συγκλώσεις, έχω χρησιμοποιήσει το ένα που λέει ότι είναι τυκ-τακ τελειώσο, και αυτό είναι γιατί δεν ήθελα να δημιουργήσεις ένα σχέδιο σχέδιο σχέδιο, ή ένα σχέδιο που πρέπει να δείξεις σε ένα σχέδιο σχέδιο. Αυτό είναι more neutral και μπορείς να δείξεις πραγματικά όλοι. Τώρα, as you can see, I have already used the square frame and cut out a window on this piece of white cardstock, and now I want to have two different colors on my stamp, so I am going to mask off the second line that says awesome, and I'm just going to stamp the first line that says you are tic-tac totally with black ink. I'm going to remove my masking tape there, and then I'm going to close the door of my stamping platform. And just because I didn't get quite of a good, vibrant impression, I'm going to repeat the process again, and that's the good thing of having a stamping platform, so I'm doing it again. Don't forget to remove the masking tape. Ask me how I know. Now I'm going to stamp once more, and I get a great impression here, so I will go on and stamp the second line of the sentiment that says awesome. Now, just because I will go for a white, black, and red theme here for my card, I want to have this word in red. The color I'm using is called poppy by my favorite things. I'm going to close the door, and I will get a perfect impression from the first time. Now I'm going to prepare the window for the shaker elements, so at the back of my panel I used some white glue, and now I'm going to put this on top of the plastic pouch. I'm going to press with my fingers for a few seconds just to make sure that I have a nice bond. Now, for the back of your window, you can use any pattern paper that you like. I decided to go quite bold. Now, depending on the pattern paper, you can choose black or white grid. Just because I want to go bold, I decided to use black cardstock at the back, and that's why I will use the white grid to have some contrast. So I'm going to place my little hearts inside the grid. I'm also going to place some of the o's in different places, and I'm not going to fill in the whole grid, and then I'm going to cover the back with the black piece of paper. Now, you can leave the front of your window as it is. It looks beautiful as it is, but I decided to use the frame, so I'm going to add it in red, just because I think it makes it look more finished. To finish off my card, I'm going to stick this panel on top of my card base, that's in red, and it's a standard size card, that's 4.25 x 5.5. For my next card, I'm going to use this beautiful Merry Christmas greeting stamp, and I think that this is so beautiful that it can be the focal point on your card, and it's perfect for mass-producing beautiful Christmas cards. So I'm stamping that on top of a white panel, and I have actually used the stitching rectangle dies to cut it out, so this has a beautiful stitching, and I end up having a beautiful sentiment at the center of my panel. Now, to embellish my card a little bit, I'm going to stamp a few of those images from this stamp set, which is called Dushing Deer, and this stamp set has beautiful images like two adorable deers, as well as a little bunny, but I'm actually going to go with the two little birdies for this card, and I'm also going to stamp a few of the mistletoads that are available. At this stage, I didn't exactly know which ones I'm going to use, so I went ahead and stamped a bunch just to have some options later on for my card. I used my alcohol markers to add some color on these images, and just because they are so tiny, it was a really quick coloring. I used the matching dies to cut out all the elements, and now it's time to assemble my card. This is going to be a very simple-looking card, but so beautiful at the same time. Now, as you can probably notice, I have already changed the format of my monthly event created. So instead of posting eight cards in one video, I'm posting four one day and four on another day, and this is going to help my video not to be as fast forward as it usually is. Let me know in the comments below if you like this format more than the previous one. I think it's better because you get to see the products more, and it's not as fast forward as it was, but I really value your feedback, so let me know below. So if you notice, I have placed the little birdies as if they are standing on top of my sentiment, and now I'm going to do the finishing touches, so I'm adding some shine on their hearts, and I'm also going to use some Nuvo drops on top of the little berries. The one I'm using is the clear one, to dry completely transparent, but you can also use glossy accents if you have that. Now for this card, I had to go back to a stamp I used in part A, so that's the Happy Poli Day stamp set. I think those guys are so adorable, and I had to use at least one of them again. So I was debating on which one of the puppies I will use, so this guy won finally. I'm going to stamp him with licorice black ink, that's by my favorite things, and that's actually an ink pad that is friendly to alcohol markers, so it's not going to smudge or smear, and I'm going to use my Spectrum Noir to color everything. When I'm sharing more than one card on a video, then I usually edit out all the coloring that I do, and that's just because these type of videos are quite long, and I like to focus more on how to put everything together, and how to design your card, rather than how I colored all the images. And I also have to apologize about my voice, I've been having a cold this week, but I think I am recovering today, I feel much better. After coloring my puppy, I used the matching dye to cut it out, and I need a few more elements for my card, so I'm going to use this ring that says Happy Holidays all around it, there is another one from this release that says Merry Christmas, it's great for creating shaker cards as well, but I'm not going to use it as a window or a shaker card for this card. So I have this sparkling piece of paper that is left over from a card that I made for part A, and I'm going to cut out a snowflake, and before cutting it out, I made sure that it fits perfectly inside my circle. At the back of the snowflake I'm going to add a few dots of glue in different areas, and I'm going to stick that at the center of my circle. I have added some tape adhesive at the back of my puppy, and I'm going to stick him just next to the snowflake and look how nicely they nest together. So I'm adding some glue at the back of my sentiment there, I'm going to stick it on top of this white panel, and by the way I have cut out this panel by using the stitched rectangle dies, so I do have a beautiful stitching around it that always gives a nice finishing touch. Now I'm going to assemble everything on top of that. I'm going to add some foam tape at the back of my focal point, which is going to give it a little bit of dimension. Now this is going to go directly to the center of my sentiment, and although I have covered up half of it, you can totally read what that says. I used foam tape at the back of my panel, and I'm going to stick that on top of a standard card, and I really liked how nice and simple that looks, so I'm not going to add anything else on top. And let's move on to the last card for today. I am using the little girl, and this month the stamp set is called Nice List. I'm stamping her with Licorice Black by my favorite Things, and I'm going to color her with my alcohol markers, and then use the matching die to cut her out. Now I have this golden cardstock, and I'm placing those rectangle dies one inside the other to create a frame. However, I changed my mind and I decided instead of using the frame to use only the inside panel, but I am keeping the frame for a future card. I have already cut out those snowflakes out of the same cardstock as the golden panel, and now I have chosen one of the sentiments that says Be Merry, and I'm going to place it on top of my acrylic block, on an angle, so it matches the curve on the list. So I'm going to stamp my sentiment there, and you can see how nicely it follows the curve. And by the way, this comes from a stamp set that is called Snow Globe Sentiments, and these are actually all sentiments that fit nicely inside that panel that you add below the snow globe, but they are so tiny, so they match perfectly that list the little girl is holding. So now I'm going to do some assembling, I'm going to stick here on top of a standard card that's formed a quarter by five and a half, and I am using foam tape at the back since you all know that I love dimension. And notice how I'm not going to stick this panel at the center of my card base, but rather on the right side, so I do have a bigger border on the other side, and that's where I'm going to stick all those snowflakes coming out from the gold panel which is going to give more interest on my card. For sticking my snowflakes I am adding a dot of glue at the center of the snowflakes, and this is going to allow them for some dimensions, since they are not going to lay flat, completely flat on top of my card. And here are all the four cards that I shared today, using supplies from the last release by my favorite Things. I hope you had fun, that you got inspired. Don't forget to leave me a comment and let me know which one of those four cards was your favorite. I hope you will all have a lovely weekend and see you on Monday.