 Γεια σας, είναι Vicky, εδώ, με ένα σπαρκολοί κρίσμα σκάρδο σήμερα. Θα σας δείξω πώς μπορείτε να χρησιμοποιήσετε το σχέδιο σας με τρεις διαφορετικές φορές. Αυτές είναι οι νουβο-γλύτερες σχέδια. Τα έρχονται 24 διαφορετικές κόλες. Τα έχουν όλοι πολύ καλύτερος. Και τα κοντάζουν έναν σχέδιο που είναι πραγματικό. Ένα νουβο-γλύτερο που μπορείτε να χρησιμοποιήσετε στο σχέδιο σας είναι το γλυμρήμα. Αυτό είναι μόνο από το Τονic Studios. Και έρχεται σε 12 διαφορετικές κόλες. Τι εξηγένει είναι ότι είναι ένα σχέδιο. Υπορρυπτείτε να εξηγένετε με την σπατσούλα σας και μπορείτε να αφήσετε όλο το σχέδιο. Και αυτό είναι το τρίτο στις τρόπο, ένα σπαρκολοί κρίσμα. Έρχεται σε 12 διαφορετικές κόλες. Και θα σας δείξω στο σχέδιο, πώς μπορείτε να χρησιμοποιήσετε όλες τα δυνάρματα. Και θα σας χρησιμοποιήσετε το σχέδιο που είναι καλύτερο για εσένας. Αυτό θα θα εξηγένω ένα πίσω της γεγονός καταγωνίας. Και θα εξηγένω έναν κορδι και για να εξηγένω ένα κορδι. Όπως πάνω, παρακολουθείτε τα πιο μαγεύματα εγώ από διεξένειο της εξηγένειας. Και θα θα βρεις εξηγένειά όλα τα δυνάρματα που την χρησιμοποιησαίω σήμερα. Πήγα να χρησιμοποιήσω πώς μπορείτε να χρησιμοποιήσετε σχέδιο. Θα θα χρησιμοποιήσω αυτή η δυνάρματα στο σχέδιο μου. και τη γλιμματισμού που χρησιμοποιήσαμε είναι το κόμμα Μουνστον, αλλά επειδή μπορείς να βρεις 12 δεύτερον δυνύτουρες της αμετρακίας. Θα χρησιμοποιήσω ένα στενσίλ και αφού χρησιμοποιήσω τον γλιμματισμό μου, από το στενσίλ και χρησιμοποιήσω τον 6x6 στενσίλ, που είναι από το Τονιξ-στουδίως. Είναι η γινότητα ακόμηisa μικρή μπουκε, και θα χρησιμοποιήσω να χρησιμοποιήσω μία μάθημα όπως αν είναι ένα χώρο χώρο. So I'm going to place it down and with my spatula, I'm going to apply a generous amount of my paste. You don't have to apply it generously, but I don't really mind. I just want to have thick and nice snowflakes on my background. And although I'm using a lot of product, you will see that nothing is going to waste because I'm going to scrape off everything at the end and put it back in the jar. So once I'm happy with the application, I'm going to peel off the stencil. So you can see the result. It's really beautiful and sparkly. And I need to let this dry for a while. I left it on the side and as I was working on the rest of the elements, it was drying and until I was ready to stick everything on top, it was already dry. So I'm going to use my spatula and scrape off all the excess product and put it back in the jar. And you want to clean your stencil with a baby wipe or wash it on the sink just to make sure that nothing is going to block all those little holes. Another way to add glitter on a project is by using the glitter dust. Now, this is a very fine glitter and I'm going to apply it on a white piece of cardstock because I am planning to create a snowbank. So I'm going to cover up with double-sided tape, this piece of scrap paper and the color that I am going to use, the glitter color I mean, is called snow glow. So I think it's perfect for a snowbank. Now I'm going to make sure that I cover up nicely this piece of cardstock. I'm going to cut out the excess and now with my scissors I'm going to create a curve as if it's a snowbank. Now, of course, you can use a die if you want to, but it's just a small piece, so I'm just going to go ahead and do it with my scissors. I am peeling off the backing so that the adhesive is now exposed and I'm going to apply my glitter on top. This is fine glitter and it's going to cover up all the adhesive nicely. I'm applying again a generous amount and I'm just going to put the excess back in the jar. So it is important to work on a piece of paper or on a coffee filter so that you can catch up all the excess glitter and put it back in. Here is a closer view on how sparkly my snowbank is. And just because this is fine glitter it is nicely stuck on the adhesive and it doesn't move at all. To make things easier for you when you are working with glitter it's always nice to have closed by a duster cloth that's swiffer. It is really amazing how it removes glitter from your hands and from your working surface. You can also use your bone folder to varnish the glitter just to make sure that everything is nicely stuck down and also you can use your swiffer and pass it once or twice over the piece just to make sure that you have removed any excess glitter. So my piece is now ready and I think it's looking really beautiful. So now I'm going to put those aside and I'm going to work on my focal point for today. This is a reindeer metal dye by Tonic and I'm going to use it as my focal point and especially as an example so that I can show you a third way to apply glitter with a different product. I have used my dye cutting machine to cut out the reindeer and as my base I use this manila cardstock. You can use glimmer paste to add the sparkle on your reindeer just like I showed you before just use your spatula and go all over him. Of course you can change the color and use a gold or maybe a silver one there are 12 colors to choose from. Or you can use the sparkle dust colors. So here are three of the colors that you could probably use but now I'm going to show you a third way of adding glitter which is by adding a simple traditional glitter, the janky one. These two colors are copper and rose gold and I'm going to cover him up with both. Now you can go darker or lighter. I'm going to show you a few options and there are 24 different colors to choose from. I think they are really great for any craft room and they are so big, the jars are so big that I think they will last you for a lifetime. To apply adhesive I'm going to use this thick glue pen which is by Nouveau again and I'm going to use my glue pen to add glue only on the area where I want to apply the first glitter. So first I'm going with the darker color which is copper. The glitter sticks only where the adhesive is and it's going to give you that beautiful sparkly shine. Now just because I think that all Christmas cards need a little bit of glitter I will be using any of those three methods for my cards this season but you need to remember that I have shown you all three ways in order. So the first one is no messy at all, the second one is less messy and the third one is the original glitter that can go everywhere even inside your clothes. So you have to be quite careful as you're working with it. I'm always working on a piece of paper so that I can catch up the extra glitter and now I'm going to go ahead and do the exact same thing for the rest of the reindeer. And also don't forget that when you are working with glitter a Swiffer cloth, Duster cloth is always your friend. So now I have all the three pieces ready to go. As you can see I have three different applications with different glitter products, traditional glitter with sparkle dust and with glimmer paste. You can choose your favorite. I think I love them all for different reasons. So now it's time to assemble my card. I am using foam adhesive at the back of the snow bank and I'm going to stick it down at the very bottom of my panel and this is going to add just a little bit of dimension on my card and I'm going to do the same thing for the reindeer. So I'm going to apply on his body a little bit of foam tape for his legs. I'm going to use my Nouveau Glupin and as you can see they come in three different sizes. I'm going to show you the tips. And remember that they are not just for glitter. You can use them for sticking paper on paper and they work really great. So with my glupin I am applying some glue at the back of his legs and I'm going to peel off the foam tape and stick him on my panel. Now for this card I chose not to add a sentiment. I am going to write down anything I want to on the inside of the card. Of course if you want to stamp something on this card it's impossible because of all the texture and the glitter. But you can die cut a sentiment and stick it on top. To finish off my card I'm going to stick the panel on a top folding card that's 4.25 x 5.5 and just because this is slightly smaller and leaves a border all around I decided to bring everything together by adding glitter only at the edges of my card. So I am going with my glupin all the way around to add some glue and now I'm going to apply my glitter and I chose to use the same color that I have used for my reindeer. So this is a great way to bring everything together and to add even more shine on your cards. And just because I love dimension I am going to add some foam tape at the back of my panel and stick it directly on top of my card base. And that was the card for today. I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel. Don't forget that I have listed all the projects that I used today down below in the description area as well as on my blog. Here are some close-up photos of today's card.