 Hey guys she bear 1,000 here today. We're going to be Pulling the head off of this weed eater right here. Stay tuned Okay guys what we have here. We've got a Troy built weed eater. It is the What is that TB 635 EC? It's the four cycle now the problem with this is it's my niece is She's saying there is no compression and And it Really doesn't feel like there's any compression So I know there should be more than that even with a with a Relief release or pressure release compression release on it But there's no like there's no compression and after like 15 minutes of use it would shut down Now that's when I brought it in here, but it seems to me like it'll start and Then kind of shut off start and shut off For a long time. It's real hard to get running after get it running. Yes, it will run for a few minutes. So I Don't know if it's a compression issue. It does sound like a compression issue to me so Let's start Pulling this thing apart See what we get first thing I'm gonna do Is I'm gonna pull this cover off right here the air cleaner Now I've had the air cleaner off Before I've worked on this thing before And I forget what the problem was But it seemed okay run fine, what did I do to I did something to it I can't remember now But there was something simple but All right now we're gonna have to try to get these the covers off here, so Let me get my glasses here and it looks like there's a screw back here and screw back here And I'm sure this side cover has to come off Maybe but I'm sure I will take it off because It's not I know it's going to get in the way I don't know. It looks like that's got a rivet And it's here, so I don't know the first let's see if we can get this off of here, so It's like I can use a standard screwdriver on that Weird stuff going on around here lately guys one of my toolbox doors yesterday Let's see here's what six on top there's three across the top and three going down lengthways The long ones and this one is a deep one down at the bottom on the top part of it Came out and grabbed yesterday morning. It was open just like halfway So I closed it no problem did what I did and went out for a little bit came back out Open again same same way. I'm like what the hell So close it again. Well Later on yesterday evening it did the same thing I Don't know but it didn't do it all night long. Looks like there's a screw here if I remember right I think I did have to adjust the valves on this thing or something And I can't remember what the specs are On them now for how many thousands they were or they had to be so I remember taking this off. I Believe I cleaned the carburetor Which really wasn't an issue but you know it could use because she she takes pretty good care of her stuff as you can see This is the way it came into me. So Well, I brought it in here This is like to see it. So they keep they keep their stuff clean Yes, I remember I'm using the camera that will not focus I can't get you much I Won't be able to get much Real close-up shots of anything so I guess She's wanting me to order a new camera here pretty soon because I think I'm gonna start a daily vlog and what you guys Down in the comments. Let me know do you want? You want me to do a daily vlog now? I'm not going to do a different channel. It's too confusing to people and Anymore it's hard enough to start up another channel. So I will just put it under a playlist and The channel I have now there's one right here doing in the channel. I have now she brought 1,000 So something about doing that. Let me know if you want me to do something get Because I want to make more videos. So there's that careful with your fuel lines. These are still in for some good there free on the outside, but Now this is the valve cover here. There's the valve cover you guys here Here's the valves rocker while the rocker arm these two Right here are the valves Right underneath there there's a Here's your intake and here's your exhaust valve And they seem awful loose don't they maybe I didn't adjust them I did something must have been a carburetor cleaning or something and it also has A Push rods a little tiny push rods now one of them push rods could be that they're back in there like I said I can't It won't focus, but they're down in there so what I'm gonna do is I'm gonna go ahead and take these off and Get you up here a little closer if I can I'm gonna go ahead and take them off. Well, it seems not very good either I'm gonna go ahead and take them off and We'll check the push rods So a couple tools here guys. I Do believe those to be a 10 millimeter if I'm not mistaken I Boy them seem awful loose. I can't know that might be an eight. I can't If I did adjust them and that was a problem Why'd they come so they shouldn't be that loose guys? That's just not Supposed was even running like that. Well, I got a minute here guys Would you think of the spook bridge pretty cool, huh? Thanks again Nancy for she actually screenshot of that So she took the time Look through that stuff again, thank you Nancy and Screenshot of that and sent that screenshot to us with the arrow As a matter of fact so that way we can see she sent me a couple more pictures today emailed them to me. I need to see I Need to check them out. She wants me to check them out. I Don't got a chance to look at them yet Nancy, but I will as soon as I do I will get back to you So if I get back to you before you see this disregard the message now There's a push for up for the intake now how you can check these to see if they're bent. It's like a car You should be able to roll this And it should just just roll nice and fine if you get any kind of wobble It's gonna have a bend in it. Now this one That's the intake and I try to keep them To where I know they're the same guys, but I just was always taught that from from my schools My school first school I went to Taught me 90% of stuff. I know that I didn't learn at home and from my dad So They seem like they're okay. I don't see any alarming issues with them as of right now So what we're gonna do is I'm not sure how this head comes off looks to me after research This guy's I've never had one of these ones apart. I don't think it's set up. I don't think it's Set up like a jug type deal So I don't know let's see. All right guys, what I want to do here I'm sorry your way over here looking at them things. Okay. What I want to do guys is I'm gonna pull some more of this stuff off I've got pull the carburetor off some plastic here This is got it this plastic's got to come off the exhaust has to come off So I'm gonna get that all off of there And it's exactly how his head comes off. I'm not sure like I said, I don't think I've ever done one of these No, you know the style of Troyville So I'm gonna get that get that stuff off there and then I'll be right back with you And we'll go from there and see what we come up. All right, so stay tuned. I'll be right back guys Okay guys, we're back I'm gonna try to get this To shine down in here for you Maybe if I bring it out here in the sign get it to focus in on it. I've got my other camera So if the sound is very low, that's why I'm see all them score marks Bring up and down in there. That's no good. You can actually feel them. They are very deep And when they get like that, it's no good. See that one. There's a bad one The same way with the piston the piston is the same way it's scored so that you know You're gonna lose compression because the rings can't seal Anything up in there You see if I can get you in on this here. Whoops. Sorry Focus there we go see them scores. It's like that all the way around All the way around is that's the bad one that I just showed you on this one here That bad one down through there, that's the one that lined up that and it goes all the way around that piston Like that. No good. See clear up the top So it's losing compression Now she can buy another one for the price that cost her to rebuild this even though I'm not charging her anything on labor Just parts alone. I mean she'd probably buy another one for not a whole lot more So I mean so she's just going to go ahead and get another one But I'm going to trade try to maybe sell like the carburetor is good the exhaust the The coil is good. All that stuff's good. See it's got a You can replace the the boom They call the boom on it different ends. I might be able to get her a few dollars back You know kind of recuperate something. It's not gonna be much, but You know, I can get her still I can get her a couple bucks back on it. So That's what I want to try to do for anyway That's sorry there. This is gonna be the end of this video because this one will not be going back together So I mean could I fix it? Yeah, sure, you know, I've got to buy You know the new jug head whatever you want to call it. We call these jugs You know, we'll have to buy a new one there I know I don't even know if it comes with the valves with the vows seem to be okay, but still And if it look wow UPS guy was very loud today. Anyway Of course a new piston won't have to have new rings. I think just fell out of there So but it would have to have you know new rings piston and it was low on oil So that being said, I would kind of worry about the rod having issues later on There is does seem to be some movement now. I didn't hear it knocking but still Just it it was just run low on oil. So I Would worry about that too. So anyway, she's just gonna buy another one so I'm gonna cut this one off right here guys another I guess how-to if you want to call it that and Excuse me, but like I said the carburetor It's still good Names a little clean and on the outside, but it it run, you know carburetor itself fine Of course gas tank Like I said these weed eater ends people people need these quite a bit So maybe I can get her a couple bucks back on it and We can go from there. So shit, but it was when it was running it was running good See spark plugger Running real good so So anyway guys, there you go see the piston wasn't all real carbon up real bad Same way with inside the valves up in there. I Mean it wasn't wasn't that old but they had it long enough for a warranty wasn't Wasn't good on it anymore. So anyway, there you go guys So I'm gonna put this stuff in a basket or something that's a basket case now But I'm gonna go and pull the coil and stuff like that off of it And like I said try to recuperate a couple bucks for her. So anyway, there you go guys Sorry Courtney. Love you, but It is what it is, right? So anyway guys, there you go. There's another video. I guess Get you turned around here. I guess a video on how to Whoops Anyway, another video on how to Not destroy something, but at least you know how to take it apart I wish I could put it back together for you. So anyways kind of hanging out I guess this would be kind of like a little vlog on that stupid thing, but anyway guys Keep it real remember she bear 1000 the myth man a legend Look out for monkey 1000 watch her videos. Appreciate you guys watching and everything guys. So that didn't say I'll chat it you guys soon. Thanks for watching. Take care. Bye. Bye guys