 Okay, so with this, we now have a good handle at the basics of noise and noise parameters. Now here in the simple mode, you can see that the buckets, as I mentioned, as well as the measurement goals, are actually static, right? As I explained, we have these buckets that are already preset, we have these dimensions that are already preset, and all of these are really here to help you get started when you use noise lab for the first time. But in reality, all these measurement goals, as well as the dimensions and the buckets are completely use case specific, right? So what I'm going to want to do if I want to run a more advanced simulation is actually configure this. So for that, we're going to go ahead and move on to the advanced mode, which by the way also includes a number of additional features and a more flexibility in setting your parameters that we'll be getting to in the next sections. But first of all, let me move on to the advanced mode. And what we're going to do, first of all, is to run a simulation. You can see that the default settings in the advanced mode are similar to the default settings in the simple mode. The measurement goals are the same, and the dimensions are the same as well. As for the daily attributable compression count per bucket, it's roughly the same, so we're going to land on the same orders of magnitude for noise. So let me go ahead and run the first default simulation in the advanced mode. All right, so here we have it, our first simulation in the advanced mode.