 interesting runoff patterns. I mixed some color paint tint, some color tint, not actual paint with my resin about 10% of that 90% resin and then first I rolled a layer on there with my roller there and then I did two more layers just kind of pouring it on using a little piece of plastic to smear it around to kind of flatten over any any divots basically fill in any little holes and I tried to get it pretty flat so it won't be a ton of sanding although I'm definitely gonna have to sand off you know like the little marks between where I smeared man those come out great you can't smell it over there can you Bellatrix let's go over there just in case though I got this palm sander a while ago was totally broken the cord here was screwed and I had to do some soldering inside the motor and screws are missing down here and some broken parts in the bomb I took about an hour but I got it fully functional the only problem is this uses the velcro sticky things which I am totally not gonna buy although I have found that if I take a piece of Pam sandpaper and fold it over like that stick it in there I can use it as long as I keep pressure in there this sticks to that enough that it it's you know shoves it around it has to make one of those old-style little clippy things where you can stick your sandpaper on it just clips in those are so much better I still have to do the other side down there I'll give this maybe half an hour to harden oh that's a nicest one I've made yet I like this connection so much that I decided to do the same thing for the pedal things problem is I don't have any bolts that long I do however have this thing that came out of a printer and I tested threading the end it's not too hard to thread so I can make this into my bolts what goes here you know I also kind of need to flip the boat over to check how wide these can be before they hit the edge of the boat oh you know what it's on its side right now so I can reach in on that side and measure that's about the bottom or the pedals go all right it's about 15 and a half inches I'll say 15 because I don't I definitely don't want to touch so 15 inches is the maximum width looking at it from out here that's way up here and the water line is going to be down there somewhere so if I had to I could bulge this out a little bit because it'll be all above the waterline but hopefully I won't have to all right outside edge the one to the outside edge of the other is 14 and 5 eighths and 15 is the max I would want it to be well 15 and a half is really that like touching so I've got almost half an inch on each side I think I want a little more than that because there's going to be some wiggle and I want to be like scraping the side of the boat every once in a while which will eventually end up with a hole and this is wider than my foot yeah I can take off a centimeter half an inch off each one of these and still be okay maybe half a centimeter I don't want to be touching the sides this is my wide foot when I used to run track this was the foot that was on the inside of the track so this part was always hitting those what's wider this one fits easy my skinny foot okay now it's 14 inches across and still enough space for my big fat feet I got most of the sanded I got this side all the way sanded and the other side I only got halfway on the other side it didn't quite put enough hardener in the top layer of resin so it's kind of tacky still just gums up the sandpaper like crazy so I decided to flip it right side up and when I flip it over to do you know whatever final stuff I do on there I'll finish sanding the other side hopefully by then the tackiness will be gone all right to put the pedals in I'm gonna have to put a support down to the bottom now is that gonna be the bottom or am I gonna put some kind of flat thing it would be nice to have a flat thing his feet down here is not ergonomic feet in the bottom is not that interesting kind of comfortable speaking how many hours could a person sit like that because of course the driver will be pedaling the people sitting up in the front they just put their feet up here I don't need to worry about their feet that's what I do yeah cool the last bolt sticking out there and I just need to make some little bearings for that I guess I'll do that tomorrow since the sun's going down