 That should not be making that sound all right. Let's open this sucker up. I did Check the motor brushes recently, so they should be fine Maybe something that's just stuck in here Yeah, I need a Bunch of hex. Well, I need a hex key for that right take out all the brush springs do not drop those Jamie Brushes are all nice and loose Turn the propeller. I'll turn the motor See if I can hear where the Squeakiness is coming from I think I need to take the whole motor off, which is a pain I've taken a take out a bunch of bolts under here and then pull the whole thing out It'll have like a long shaft that goes all the way down here easy to get out a bit more of a pain to get back in Because you know, I just have to thread it through down here and hit the right spot. I Guess it's a good thing. I'm getting those out now in another year. They might not come out I'll coat them with oil before I put them back in Apparently there's something somewhere down here That's hold none of this thing. I thought it was just a thing that's whatever. I haven't opened this in years though I think I might have to take all the bolts out of this and just take off this housing so I can see down there or I Probably have a video of myself putting this thing together What I rather do Search through my Videos or just open that. I'm just gonna open that stupid thing. Okay. This one is attached at the bottom Different than the other one. I'm thinking of and there is one thing I can fix very easily This has a this hole here has a tap in it and I vaguely remember this I was tapping the hole so I could put a bolt through there and Tap broke and then it's been there there ever since but now it's rusted enough that it's loosened up I think I can get it out. Well, I kind of wrecked the end of one of these to do it. It's okay. I can I can fix it But I got the thing out Okay, I got the stupid thing off It was even threaded into here and now I remember making the threads on this. That was a pain This is basically a big fat magnet that goes around This part man, it was hard to get off because it's really magnetically strong anyway this Rectangular thing here shouldn't be here. It should be right there Lined up with this one. There's another one over here. That's messed up. I Gotta get them all back in place and hope Some kind of glue I have I think that's dried out. No Hopefully I can glue them back in place Yeah, there's a one glued in place four minute epoxy. So it shouldn't take long Clean this guy, man They're neodymium magnets. I'm gonna need both hands for this Hey, I wiped it off with alcohol Filed it to make sure there's no bumpy edges or anything. Oh Nice thing about this is it magnetically holds itself in place. Oh, I Don't have to hold it to let the glue cure Already sounds better What was up here? All these other screws go every screw gets dipped in oil before it goes back in All right, let's see how we did here part of the noise. It's just the rough gears down there cuz that This was a used thing. It was actually in the garbage That's giving a quick water test. I think a few more. There's so much stuff. I've got a bad case of SMS So much stuff