 Hey guys this episode we're gonna see if this bed edger right here will run stay tuned All right guys, this is what I got this week This is a bed edger We're gonna see if it's gonna run this It don't have the recoil, but I can put a rope on here and wrap it around and pull it and start or Use my air gun to spin it over with that nut right there, but this is a bed edger. I also have This thing this is a kerber a curbing machine to make curbs With concrete. That's what this is and I got all the towels for it And I got this and the bed edger. I got all for 50 bucks off my boss so Looks like down under there, but we're gonna get this unloaded get you set up. We're gonna see if it's got spark and Shoot I'll have to send her down after a little gas and we're gonna put some gas in it See if we can get it to fire up here lately. I've been doing pretty good on everything I get I don't have to work on it fires right up or it works already So but it'll give us a little bit of tinkering. I think it's gonna need a tire there So see that that's not gonna hold it or yet. There you go But that's no biggie. I don't know if I'm gonna use this engine to build a little go-kart Or if I'm just going to you know get it running fix it up. Maybe a couple new tires and sell it I don't know what I'm going to do yet I've got something else I bought, but it's not here yet because it's too heavy and too big to put in the back of the truck and It is a miller 303 phase welder, so that's going to be interesting and I've got it cheap too I gave 300 bucks for it So I'm gonna get this unloaded send her after some gas and we're gonna go from there and I'll be right back with you guys Hang tight. Okay guys. We're back first thing we're going to do is check this for spark and I'm going to use this little tester here. I've got what you do is you put this in Right here on to the spark plug and you put your spark plug wire on this in and It will tell you if you have spark if it lights up when you crank on it, so I'm gonna put this in down here on to the plug and this end Onto the plug wire. You see that right there. I'm gonna get my gloves on Never fails never fucking fails Don't say a car for two hours. You get the camera out and all of a sudden. It's a damnations day parade I'm not promoting that anyway, by the way, so Well, I mean jeesh Alright, I'm just gonna pull with this rope here and let's see if we've got sparks if it'll light up No light. Let's turn the switch on now. That's right Huh? Oh What I'm not trying to start it. I'm checking for spark honey. I did someone hasn't went got my gas yet Shit there it is. It's lighting up. So we have spark guys. I'll do it again Just in case they didn't see it. Let me zoom in on here a little bit Watch right here. Yeah, watch right here Look kind of a little bit weak, but I think maybe enough to fire once I get some gas in here See if it lights up again Yep, okay, so we've got spark so now we're gonna wait on monkey to go get us some fuel and And We're also going to try this Ryobi here that I've got this blower behind me that I bought and We're gonna see if it'll run but I'm thinking it probably does but it's been sitting a long time. So she's gonna get us a fuel and We're gonna put some fuel in here. The tank is very clean It looks like brand new on the inside of this and it is empty. So I'm thinking whoever parked this That my boss got from Probably emptied the fuel out. I'm not sure but we'll see so carburetor. Maybe I will know if it runs It does have some good compression. So I'm feeling pretty confident about that. I'm not sure what size it is What size engine it is but we'll find out and I'll get back with you on that but right now I'm going to jump off here let her get some fuel and Go get my game plan on see If it don't run, which is plan a We're going to go to plan C Because plan B will be to figure out what we're going to do on plan C. You guys follow me on that list And I'll be right back with you guys hang on all right guys I've got the likes on okay I've got the switch on I've got I've already poured the gas in it I've got the choke on and I believe the gas is on And I let it set for a minute Make sure this is in neutral and Let's give it a shot It's supposedly this thing sat well, I know of a year of a year at the shop behind the shop and My boss Eddie He said it sat for several years Before he got it so Let's see what happens guys Freakin believable a little bit of gas leaking out of the bottom of the carburetor right there by the wheel So but it is running Let me shut this off. Okay, right down there By the wheel. I see some gas. I don't know if it's because I had it towed it up Let's zoom in on that right there by that wheel. That's the bottom of the carburetor right there so Little leak there There's a little o-ring right up here on top of these Right there. That's where it's leaking from So no big deal. It's like a 10 cent fix actually it's free for me. I've got o-rings at work So guys, there's that Honestly that is the first time I did try to start this thing and And I do know that it has set Because I've been where I'm at a little over a year and I know For a fact that it's been sitting there for a year and it hasn't been started And I forgot to mention that This this tool here. I showed you a second ago This will tell you if you've got spark from the coil now It's not going to tell you if you got spark from your spark plug in order to to do that You got a Touch in the head or some kind of metal and pull it and if it sparks are good, but this yeah, this will tell me You know that of course It's getting sparked from the coil. So that's that well guys there we are so I got I got the weed eater or the leaf blower See here we go now. We've got the Hell's Angels Anyway, I got the leaf blower here. It's a Ryobi. I bought it for 25 bucks or something. I talked to guy down He said it should run He hasn't heard it run, but he was told it run. I'm told it runs I don't know spark plugs kind of buried up in there So I didn't even check it for sparks of what I'm gonna do. It's a mix. It's a 50 to 1 mix So it's a two-stroke. So what I'm gonna do is mix up a little gas We're gonna put some in there and see what that does so so far I haven't really got to work on anything other than this, you know, we'll on the on the edge or we will Just put some air in the tires I may take it out here inside the house and see if it digs up a little dirt it should One tire. I know like I said, I showed you it's got a hole in it So it's not gonna air up, but that's no big deal So I don't know that that inch that sounds really good didn't smoke or anything does have a slate fuel issue, but That's not a problem. I think it's half inch Maybe 12 millimeter nut or a bolt on the bottom of the bowl And you take that off and the bowl comes off You just put your new seal around there o-ring whatever the case is on that they're usually o-rings now But it may have the gasket But it's no big deal. So or it could just be dry from sentin So it may even stop leaking. It's not one grudge night anyway. So and then we've got the Kerber over here You know, we can plug it in and check it. So I Mean really, I don't know what to tell us to do But let's mix up some gas and let's see what the Ryobi does. Okay. All right guys I'll be right back with you in just a second hanging there All right, I'm back What I did was this takes a 50 to 1 mix and I mixed it in our little boat thing that came with our Boat motor that we bought last year That'll be another one. We'll take it out and and try it out I've got about an hour on it and it takes like 18 hours I'm a whole crap to break it in. I don't know why you don't have to do it to a weed eater And it's essentially a weed eater. But anyway This is what I mixed it in and that filled it up Now this the guy said he thinks it'll run like I said, I didn't pull the plug out of this Now I did hit the primer bulb ten times And it's got a little leak on the primer ball, let me get you down here where you can see We'll zoom in on that a little bit That little ball you push that little bulb So right here, it does have a little leak there that like I said, they get old and they're cracked. They're just rubber so That's just a couple of dollar fix and just a few minutes So all right guys, let's let's see if this thing will run Put it on a choke There's Joe already primed it and I just primed it again. There is gas coming up out of here it says ten times guys, but If when you're pushing this bulb and you can see fuel in there You're good to go. It's it's prime But if you get a little leak here that may cause it not to run right and whatnot But that may be another Another video. Let's see. It says to open the throttle up Got throttle open. Let's see what happens guys Okay guys, damn it can't work on nothing. I hope my mic's working. All right guys There we go, so It runs Not well when you open the choke all the way up It seems like it doesn't want to idle but when you go to rev it up it bogs down. You heard that boo That's telling me it's not getting enough fuel so when you put the choke on and It's running and it runs good you about half choke. It runs really good. So here we go again with the damn traffic so But you open up the choke and you give it throttle it bogs down. That's telling me that It's not getting enough fuel I'm going to check the air air filter and stuff like that. So that's something we could do take this carburetor part here one of these days soon and put it up here on my desk, which is my workbench now, but we'll do that and see what we can do and See if we can get it get it fixed and run them properly like I said, I'll check the filter first But it could have something to do with that parmer bulb you know because it's it's It could be you know sucking air because you know, it's essentially a leak Because that primer bulb is cracked and gas is coming up out of there when you when you push the buttons So that being said, I'm thinking maybe you know, it's sucking too much air That's why it wants to run when you cut the arrow down on the choke Crows I hate crows and scared of them so We'll check that out, but I've got a runner. I got 75 dollars in this stuff Couldn't be more happier. So we'll see what we're going to do with everything. But again, thanks for watching guys Don't forget check out monkey 1000 she is editing a Video as we speak so she'll have one up here She just put one up me talking to keys in the car with car run and I had done a lot with a with a coat hanger So but that was funny. So anyway guys again, thanks for watching appreciate it Enjoy the rest of weekend and if you see this tomorrow, then please have a great week next weekend We are going to new Smyrna Beach and we'll get some video for you guys of some of that So that being said guys, thanks again Please comment rate subscribe share these videos and With that I'm going to say that she bear I'm gone. Remember the myth the man the legend she bear 1000 Take care guys. See you. Bye. Bye