 Now the installation. We need first to install the QPemix. This is the main tool for the beginning. The QPemix you can download from the website on your screen or from the link in the downloadable tab on the left right side. Sorry. Then for the QPemix you also need to have the Java on your PC. Then you need to download the 32-bit or 62-64-bit Java version. In case you face some issues during the installation or some problems in Java, I recommend to look on the user manual from the QPemix user manual number 1718 into the FAQ section. We add the most common problems during the installation. The second part which we need is the IDE. The second part which we need also to install will be the IDE which we need for the debugging the labs and also for the writing our code. For the IDE we have several options. First can be for example Atolyc, IR, Kale or for example System Worldbench from AC6. It's on you which one you will select. The first hands-on I will show for all of them. During the next labs I will usually pick only one. But usually the hands-ons will be very simple. Don't be afraid. Also for the debugging and for the connection with our nuclear kit, discovery board or eval board you will need also the STLink driver. In case you never work with the STMicrocontroller before the driver will be necessary. It's possible that few IDE's will install this driver automatically but for sure here is link for our driver. And please not forget usually for the driver installation you need to have the admin rights definitely on Windows PCs.