 Welcome to this episode of Door Hardware Nerds, I'm Mia Merrill and I'm a product manager here. Today we're going to be unboxing the 10X line from Sargent Manufacturing. The first thing you're going to notice is on the label we now have a blue dot for the 10X line and that is to distinguish from the 10 line. So if you have any of those sitting on your shelf, you'll be able to see the difference because the 10X will have the blue dot. Alright, let's open it up and take a look. Now right inside you're going to have your installation instructions as well as your door prep template. And then you're going to have an insert here and the strike is going to be all the way at the bottom there. And I'm going to pull that whole insert out just so we can look at it. There we go. Your strike is inserted there and then when we open it up you've got your latch and your screw pack. So all of the screws you need is going to be here as well as your push pin. Alright, let's take the lock body out of the box. You can see how it looks right in there. Alright, we're going to pull that out. This is going to be loosely assembled from the factory so you'll easily be able to take the inside rose assembly off. Alright, so there is our outside assembly. It will come from the factory set for one and three quarter inch door. You need to adjust it for a different door thickness. You'll take it off like that. Turn this to adjust it to the door thickness that you need and then you're just going to put it right back on. Make sure that it's seated perfect. So when you are installing in the door you're going to put your latch in first. Then you're going to make sure that the end of your latch there is seated into your retractor just like that. Then you will have all these components separated but you'll have your spring cartridge go on, then your inside rose and then your inside lever and you are all set to go. So I hope you are as excited as I am for these to start rolling off the production line. If you have any questions or comments you can leave them below and I will see you in the next video.