 What's up everybody I Am here I'm not as sure if you can see me yet, but hopefully we can There we go Alright just getting set up here some bad Connection I'm officially in Let me know there we go All right, I'm officially in So let me know if you guys can hear me let me know if you can see me okay if the connection is okay a Little worried about the connection today Pixelated yeah I might have to Can you guys hear me now there we go sound is five by five? Backwards and blurry audio is good well dang it So I'm doing a huge upload right now, and I thought it was gonna be done by now, and it's not so If it still continues to suck and be blurry then maybe we'll Have to postpone to this Unless I can run and pause everything that I have going it might fix the sound early What's it called it might fix the video if I pause everything? The image still sucks, huh? Well, that is no good. Hi guys all doing out there. It looks like we got Andrew s Bob s Tony and More not talking currently Let's go see Gonna look at the control room and see how bad it's showing me here. Hmm. It's saying it's okay Is he getting any better What up, so this was a random thing so I got back from a vacation very early this morning and I thought This was at my door. So I thought we'd do a Video on it, but I'm just curious at the stream getting any better or not Video-wise is it any better? It's not any better. I might have to postpone and and cancel till It's not any better dang it Terry Let me run over Not any better. Let's see Let me run over and pause what I got uploading and let's see if that fixes it. Give me one second. I'll be right back There we go Love your bed Yes Is that any better? Let's see if I can refresh on my side. Sure is a box. That's right Kevin Is the stream any better? Nope, someone says no Well, that just sucks. I just paused Everything I had going let's see what I can do Getting better. You can read the under logo now Now it's bad again Yeah, this is true the onset. He's seen me look worse and that is a true story Yeah, I had too much I have so much crap going up that I'm sure pushing this stream is not helping So I just paused and cancelled some of it. So Caleb might kill me, but That's okay Is it any better now Looks good now from Stonewall. It's it's better from Rafiki. What's up everybody Kevin? How you doing Dion? How you doing Richard Tony Stonewall? It's Rafiki. Hey guys Ben. Oh good. I Heard you guys can hear me. Okay, so that's a good thing I Kevin's lonely. All right. Well, you're here with everybody so you can chat so so I got back from being in Wyoming and Had this on my doorstep and this is a return unit under five I Reality was nice enough to send it to me I need to do a complete build video using Luke's guide with this, but I Do not know what kind of shape it's in because it's a return unit Tony says we're clear in West Alice awesome Everybody if you're if I'm still fuzzy just do a refresh and you should be good now. I Wonder why I'm weird. That's so weird. I Don't know why does that on this computer? Well, it will not matter soon Because I agree. I agree Kevin. That's a true story so anyways, it won't matter soon because we'll be hopefully In the next week or two total will be filming out in the new garage in the new studio space Speaking of that if Dionne's watching he's been helping with that and I definitely appreciate it But I took a small week off To go to Wyoming. I don't know why it's mirrored. It's we've tried to fix this a hundred times What's really crazy is it doesn't go back? So we're gonna keep rolling, but I got this Ender five and Kevin that's probably not a question you want to find out but yes So I got this enter five and I thought I cut it open but I have not opened the box yet and I want to check it out and Maybe do a build on it just to see if we have all the parts if we have all the parts then I'll probably Use it and do a full Creality build video like we did for the end of three No, not that I know of midnight This was given to me by Creality full disclosure They gave me the ender three that I filmed that build video on as well They had this return unit in and instead of shipping me a new one. They gave me this one. So that was pretty cool with them I know there's other people on Amazon that do sell their return units. There's quite a bit of actually So let's get this bad boy open It's gonna be hard to see because I only have the one camera right now, but Boom yay So in the top, I'll show you what it looks like here so far Maybe not dump everything out. So it looks like whoever packed this back up did an okay job So let's just hope everything's here We get the filament holder from Creality I'm just gonna set a whole bunch of stuff out. Hey, we've got instructions instructions are good looks like the the screen and I'm literally gonna go right off their instructions today and not We're not gonna follow the guide today because I'm gonna do a whole new video video on that but Hey, we got The extruder and actually looks it like it's in good shape. I wonder if they even use this So there's more foam I'll be getting a new cam When we go to the new space and I start filming there I'm gonna have a couple in there and They are gonna be much easier to use because it'll be probably on arms are hanging from the ceiling So it'll be a lot easier to use from my new space But we got to get the new space done, which is a big project I'm doing it right now. I'm doing this in my basement on the bar I won't make any bar jokes because someone's watching and it's not funny right now Anyways, so next we have ourselves There we go like that looks like Z Just trying to get it all out of this box so we can play with it. What do we got next year? next thing we got You know, whoever packed this up did a pretty good job So I'm hoping it's all here and then hoping it works. So this is gonna be the top The whole top of the unit there I'm just gonna set it there I See a ha ha from beyond that's pretty funny. Yes, that's a good point Kevin. There's usually a setting up here in my Settings, but it doesn't work when you when you actually click it. It doesn't mirror me. It's the weirdest thing It doesn't flip it. I mean so it might be this crappy camera. I'm using a What is the thing a Logitech? Like 270 or something. It was a crappy camera. I had for my I was using it just for my octopus Print so I could watch my printers and I needed something to use and then I was gonna buy a new one PC by the way I was gonna be This is a true true story Dion Anyways, I was gonna buy a new camera, but I decided I'm gonna wait till we get the new studio done That way I can just do it all at once And we've been putting a ton in the new studio. I forgot to show you this is the bed standard Creality bed With the magnetic build plates on it not a huge fan, but Hoping it works. Otherwise, we'll swap it over to probably the new TH3D a magnetic bed. I think it's looking awesome Alright, so now we're down to the last layer and let me show you this So the last layer is actually packed pretty dang good Whoever put this back together I did a pretty good job a lot of these I've seen a couple of them where they just threw parts back in a box and shipped it back But it looks like these guys did pretty good to put them back together Andrew. Yes, the C920 is probably I'm gonna go through for go to for one of them and I'm probably gonna do the 4k version for the main one Hey Spain, how you doing? Yeah, there's two checkboxes one for mirror one for flip and and they don't work Not with this camera. It's the weirdest thing So in that box the first thing I pulled out looks like a box of parts. We'll open that in a second I'm assuming that's gonna have screws and all that happy stuff It looks like this is the filament that came with it Which is actually a small spool of filament, which is awesome But it does look like they use that because it was open So and Whoever packed this back up. I thought they were doing good, but they did not secure the end So I'm sure it's probably Tangled in there. It could be Andrews Some of them come like that. I had that the Ender 3 Pro that I did for my Ender 3 Versus Ender 3 Pro video that was returning it to and it was pristine It wasn't even ever taken out of the box So I'm guessing someone opened the box and they said, oh, nope Close the box and send it back because I think a lot of people buy these and they don't realize you have to build them you know some of them you can buy already built but if you're buying a $200 Ender 3 probably not my mom's on hey mom Yes, Tyler is the one that set me that Ender 3 Pro for that video and he is correct that thing was immaculate I mean like you open it up and you would never know it was a return unit. Nice. Thank you, Andrew So We also got Extrusions and these are all either put back in plastic or rewrapped I mean whoever whoever put this back together did a pretty good job so far Yeah, so midnight in the description of the video There is there is one for Criouty and there's one for Amazon. However, you want to pay for it Both of them are from the official Criouty stores But Criouty did reach out and offered me an affiliate link, which I gladly accepted because I definitely appreciate that So in the description below Below the video you should see the affiliate link for the Ender 5 and if you want other ones If you go back through any of my other videos and scroll to the bottom You'll see all the affiliate links. Excuse me for any Ender or any Criouty machine that's offered right now Also, you check out Amazon and you use my Amazon Affiliate link You can use that to buy the Criouty Ender 5 Otherwise if you want to help me out with the channel You can actually click on that link and it'll go to the Ender 5 And then you can go anywhere else you want in Amazon and that will help me out as well You don't have to buy the Ender 5 even though I appreciate it if you did you can buy anything from You know toilet paper to whatever as long as you click on that affiliate link from Amazon that's in the description below It'll help me out on him because the Amazon's gonna give me a little bit of that Unfortunately, I can't use it myself because that would be awesome A ton of stuff on Amazon and mom if you're still watching you can't use it either because I'm getting trouble because you're on my account But there is affiliate links below full disclosure again Criouty gave me this printer To new videos with no they didn't have any requirements They just you know I asked them if they had or had one for Ender 5 videos Because I was getting a lot of questions on them and Luke just put out an updated version on his guide with the Ender 5 So we're gonna be doing those videos too But then they offered me the like I said the affiliate link, which is awesome that Amazon affiliate link is really awesome Just because you can click on it and then go buy anything else you want and that will actually help me out Nice That's cool. So The other cool thing is that I have another Ender 5 coming on about It's on its way from China from another company that I'm gonna do a full build video fresh out of the box So it'll be actually a real not return unit so I can film everything coming right out of the box Even though I probably could have with this one. This one was actually pretty good so See if I don't take out my camera here the last piece in the box Was the base So that's pretty Pretty awesome and Deon if you're still watching whenever you want your soul, let me know I Got a saw Yeah, you know the so far the crowd he has been awesome. They've been awesome to me and and starting the channel with Luke's help guide was focused around cruelty and Clone machines like reality. So so far so good I do have the feelers out on a couple other different machines. We'll see if that happens or not And we'll go from there but for now My goal in life would be to get this put together and then go back out and work at the garage. I Got a lot to do out there. The studio out there is getting there, but it's got a lot to do still the or I wish so Let's see what we got so everything is pretty much laid out here and I'm gonna this was in there as well I'm gonna open this bad boy up Of course, we got the Criotty scraper. I'm gonna put some of this stuff out of here because not gonna use it Looks like we have the nozzle needle and some zip ties in this bag that over there Got some screws and washers one two three. Well, look at that four screws and four washers for the For they saying for the filament holder, but I'm pretty sure the filament holder already had some in it right here So I'm not sure what those are for but hey, they're here. That's good more filament holder Stuff and some larger screws and some other screws So they definitely took this apart and played with the screws because all of the screws Are not in the same bags as they came in So in this bag is a whole bunch of other bags, and they're all empty So they definitely did something. I'm guessing they tried to put it together or put it together There's a whole bunch of screws in that bag What else? The good old Guarantee card the spool holder SD card Probably will format that before I put it in because you never know where it's coming from I don't know what you're talking about. I don't have a ladder That's funny Hey, Jake from State Farm. How you doing? So we got the side cutters and the own wrenches will definitely need those beyond is one of my best friends and one of my Neighbors he does semi pretty close to me and He's been helping me build a new studio and I have a couple of his tools that we're working on The for the end or five Tony is that what you're asking me for? Ooh or two or two or four is a solid printer looking at getting one myself But Tyler says it's solid. It's probably solid Tyler West. I don't know if you guys know Tyler He has he's part of the C3d groups and also Tyler if you want to drop your links down there for Your store and for the C3d store. That's cool, too. I Don't know if you guys sell the under five yet, but maybe don't publish that Hoping people will use the affiliate links below if they want paid in beer Dion will answer that but yes Here's another bag of screws and it's like a whole ton of different ones mixed up More Allen wrenches a little tiny wrench. Yes Jake from Jake from steak farm and a little screwdriver, of course, but the beer of choice choice around here is Guinness so we We definitely have a few of those while we're working All right So here's the instructions Any questions before we start I know I don't think it's gonna take us too long to get this thing together I from the other build videos. I've seen it actually isn't too bad But I do know I'm gonna use what came with the kit here to build it I'm not gonna get any other tools out because I want to show that it's possible and just make sure you know I do it that way Otherwise I go get my big drivers and that's a lot easier. I Can't find an affiliate link for you that doesn't take me to under five I Don't think it has a 1 1 4 silent board because they did not ship any printers with those But Kevin T if you Are you talking about the Amazon link? I think he's talking about the Amazon link. I don't know what boards in this either I'm guessing it's a I had to guess if you oh it has a oh It's a land power supply. I thought it was meaning well for a second, but it looks like landie Got me to open it and find out Yeah, Kevin T if you're talking about the Amazon link what you do is click the Amazon affiliate link below It'll take you to the under five and then you can search in the search bar and go anywhere you want and that'll help me Are you looking for a? specific Something on Amazon that you're looking for an affiliate link for or are you looking for a different printer? Or or just anything because I can create Affiliate links for pretty much anything now, but what if you're just looking to help me out Then all you have to do is click on the one that takes you to the end or five on Amazon And then if you search away from Amazon and type in diapers That'll help me out too Anything anything you buy after you click on that link will give me credit for it But I cannot if you didn't see Narisa's stuff. I don't think I can actually put that in print below Someone asked me what board this is so we're gonna find out real quick. Yeah, so Kevin if you click that end or five If you click that end or five Amazon affiliate link and then search away You're good to go you can buy whatever you want Yes, I Wish I wish I had affiliate. I wish I had an affiliate link for Menard's because I Have been there more in my life in the last three weeks four weeks or work. I think three weeks then anytime Before and I've spent a good amount of money so far in the garage So Dion was hella Dion was here before I left on vacation and and We have our What do I what do I have? Oh, I have the cabinet framed together As far as what the bench is gonna be and the enclosure underneath and it is awesome and it is huge. It's gonna be sweet So I just took the cover off here gonna be careful with that fan and It is This is a creativity one point one point four board That's pretty awesome. So we got the one one four board. We got the land e-power supply Everything's glued like normal. I'm sure those connections are tinned I'll probably have to go back when I'm done here and flip it over and fix that part I know Tim from T HG would be proud of me if I did so And just a heads up they use 12 gauge silicone wire from the power supply to the board, which is pretty cool, too So that is what is in there. I don't know if I can even show you right here They have you glued so they have a little baby fan right here. I guess Everyone lost their thumbs up. Oh, I don't know what that means. I mean they took it away from me This is what's in the in the I'll turn it over. So it's a little higher in the bottom so power supply your board is over here and Enough power in here switch and it looks like on the front You have a power switch and your SD cards and SD slot or your USB slot Yeah, a little fan. I'm gonna swap those will probably I'll be swapped out too but So that's what's inside. It's actually I like it. It's it's tight it is a That's a good word for it clean. It's very clean. Yeah, very nice layout They did a really good job, especially because they put that landy power supply I think someone earlier said that they did mean well in a few But they changed the power supply, you know, it's better for me as long as it's better than that crappy Stock one that came with the under three. Let me see And we're on 230 so I'm gonna go ahead and switch that right now. So I don't forget later There we go now around 115 And that's right in here. It's hard to see with these bad camera, but Ireland. How you do Bernie? Ireland's in the house So, yeah, now we'll Don't forget I did enable Super chat so if you guys want to throw me a coffee or a beer or beer money to help pay Dion for his Efforts and get the studio done faster. You can always do that not not required obviously We also do we also have PayPal and patreon if you guys so choose Pay pals is probably the best they take the least fees away That's that's funny under So if you are gonna help I appreciate it anyway though The more the more beer we have available the more I can get down over here to work on the studio That's a joke. He'll come over anyway. I just have to have time. I probably should be out there right now but I decided that I Want to do this tonight? I'm just putting the Screws back in here Put the fan back in so that should be good. I'll be changing those fans out probably Depending on which ones I grab I'll probably just do the hit Chris. How you doing probably just do the teach 3d ones or Not a big knock to a fan No pun intended But I do have one for the see me CNC real stock before that I have I need to do a video on replacing that so earlier. I saw that Thank you It did not get a ding yet, but I really appreciate that Kevin so earlier I signed to Reese post a video and he said he wasn't going live tonight and that's what prompted this whole live thing really because I was Contemplating being in the garage Nice Thank You Kevin. I definitely appreciate that Thank you. I just got the post Definitely appreciate that so I know Yeah, they are they are I Wish I could fix that it bothers me too But there is not even we even had Tim from th3d. He jumped in here one day and Tried to find the settings where it would allow us to change it and it didn't Nope, it's just crazy So what I'll do for the next one before I do any more live videos. Thank you, Tony Thank you so much. I appreciate that five bucks definitely gets us a couple beers Before I do any more live videos after this, I'm gonna get a different camera that way we're good. I appreciate that from West Dallas nice Very quiet Jake says from the glee 60 it looks like that's how you say it Solancia, that's right It's right here. It's nailed to the wall right here, but you know, it's right down the wall. I Have a cilantro sign right on my wall Okay So here is the instructions so it says to make sure everything's here Kind of funny because it's everywhere Step one prepare the following parts It's the base We need eight M5 by 25 socket head hex screws and we need M5 washers so I am Dump these over here because there's so many of them. They're all mixed up We got to figure out which ones are which these do definitely look like someone put this together though the the paint on these screws some of them you can tell See if I go there we go paint on the screws. You can tell that they've been threaded into something But that's okay as long as we get down in the end And if we don't gravity said they would ship me the parts that I need to fix it or If that doesn't work, we'll buy the parts and fix ourselves with other aftermarket stuff Again, thank you Tony and thank you Kevin definitely appreciate that. I definitely Know we'll hold her jumped off the ledge over there. I definitely don't Come in here looking for anyone to do that. So thank you All right, so we need What else do we need aluminum profiles? Stop profile Anyways, so that would be these Whoever packages man, they did a heck of a job putting this stuff back together or they use saran wrap. I'm not sure One To That's right. You're an IT. I forgot about that. I have to go back to work tomorrow. I've been gone we flew after work last Wednesday and We got back about 2 a.m. This morning to the house The the flight on the way back was delayed and I flew into Madison actually Because it was like half the price to fly from Madison to Denver to Wyoming where I went Then it was from Milwaukee, which was crazy, but so we got in about About time one o'clock I think Now we got in about 12 30 and in Madison and I had to drive home from there for me It's about an hour and a half minus the garbage detours Because some of the roads are under construction right now All right, check if the part is complete part for the base includes 2020 aluminum profiles for them a corner bracket a control box and foot pads so We have all four 2020s we have the corner brackets. We know we have the the Control box and there is said foot pads right on the bottom of the corner. It's hard to see in this light So that is good so step one was to prepare the parts Step two will be to probably put them together So let me get some of this stuff out of the way For those of you who are keeping tabs Deon actually helped me build this bar as well So he needs another beer is one thing Keep the base facing Let's see keep the front of the base facing you so Awesome And I don't know how many how many people we got out there, but hey everybody if you didn't already subscribe Please hit that subscribe button below. I definitely appreciate that. We're rocking and rolling subscribers wise We're gonna hit 2000 pretty dang quick, which is phenomenal. I really appreciate that everybody See take one of the vertical frame pieces and place it in the corner on top of the frame not on the bottom And line it up with the corner notice the hole at the top of the piece is facing left in relation to the Front of the printer use two of the m5 25 screws and the washers to secure it to the base so I'm gonna pull this thing back just a hair so I can I'm actually gonna Let this balance a little bit, but I'm gonna actually screw up from the back edge of my counter. So Let's see. What did you say? going on a Somebody say beer Yes, when I get to 2k We will have some adult beverages if that Makes sense What's really cool? I got to show you I don't know if you've already seen these but On the front here is there's actually instructions as well, and I thought that was pretty cool I think we have whiskey we could do whiskey Yeah, and I did bring something back I can't show it right now because it's not here, but I did bring something back from Wyoming. That's gonna help us with with our drinking with any beverage Kool-aid whatever so it says Line them up notice the hole at the top of the piece Facing left and right in relation to the front of the printer So where is said hole there is said hole right here so It all should be facing left or right. So the front of the printers are there and It looks like they all go in with the holes Facing left and right so if this is the front of the printer here because this is the corner They want the holes to face it looks like that way from the picture so And that is correct So what they I just looked at this and this actually says it much more clear on the on the board itself. It says Basically when you put these uprights in The hole is here and the hole is here and they want them facing inside towards each other So the holes are facing each other when you fill this thing which makes sense So what do we got no abs? No absent no no no Andrew says uh Oh nice, which which distillery Andrew I was in scowling for my honeymoon. We didn't get to stop any distilleries But I would have we did go to Jameson while we were in ireland though I'm gonna get the Appropriate on wrench and while we're talking. Yeah And that's hilarious If you need any help building anything just yell he said he lives across the street from a distillery I just lost my help I think Ooh 30 year old single malt that would be awesome. So what I'm gonna do just so you guys know I'm gonna take one of these Extrusion I'm gonna put it underneath this corner And the corner is right off the back of my bar here Then I'm gonna take the upright here and I'm going to set it Where it goes and I'm gonna use basically go up and tighten these hand tighten to the bottom Just so I can get them on there and I'm not gonna tighten these all down yet I'm just gonna get them all pretty good. But just still a hair loose One thing that I am going to do If I pull this thing all back apart or with the the other one that's coming because I am going to be rebuilding this Like I said earlier with a full Jesus if I could talk with a full build video assembly video And we're going to use Luke's help guide and do his fixes on this. He does have a few fixes for the under five So I'm just getting these so I tightened them and then I brought them out about one turn each Will work for moves. Thank you Chris. Oh, no problem with that thing. Yeah I appreciate that um However, however you send it to me whether it was here or on PayPal or Whatever, I definitely appreciate that Again, any, you know Any amount is awesome. Oh, thank you Thank you You guys rock me I really appreciate that guys Yeah, I cannot wait to get this uh outdoor The garage studio will call it done because I think you all are gonna love it If you have any ideas want to throw it in do it Yeah, paypal is definitely the best. Um YouTube youtube takes about I think it's like 40 percent or maybe it's even more. I think it's like 40 percent um Of what you hit. So if you if you do it through super chat or anything like that I really appreciate it. I'm never going to say no um If you do it through paypal, they don't take nearly as much It's the same thing with this one. I got it in the holes are facing each other here and What's funny is that? Yeah That would be awesome Party at the studio. Let's do it. I mean What's funny is that and if he if you really wanted to Deion could literally Like drop the stream and be here in a matter of about one minute That's how close he lives to me, but I would not go searching for his house. That would be a bad decision Anyways All right I'm up for some barbecue when I get the uh when I get the studio Up and and functional I'm uh, I'm always up for that. We're you know, I was thinking any we should do something 37 seconds. That's right um, we should definitely do Just making sure I'm putting these on because I'm talking talky talky Anyways, we should definitely do some sort of Wisconsin meetup if you're in Wisconsin um I know there are a few people out there so That would be pretty cool. Also For those of you who didn't know Uh, I'm sure everyone mostly you've seen it by now, but Mike from uh, willy's 3d passed away this past weekend which is Very sad. I like you know, I I sat at work uh many a times Watching his stream during the morning and and keep walk, you know And keep working, but I was watching his stream while I was working and listening to it And uh, he definitely tried to help everybody who asked for it. So If you did not see that Now, you know Like I said, Mike Mike from willy's 3d Wiley's 3d uh passed away this past weekend So if you're finding him on social media send lots of love that family needs it. I know it was unexpected. So I got to find Colin and uh ron On the on here. I know they always streamed with him and And uh Ask make sure they're doing okay Because I know they they probably knew him the best So I'm almost done. I wasn't talking talking talking. Yeah passed away friday um, this would be done, but As deon says I'm talking talking talking. There we go So I officially got We're just a little loose so I can move them around but Officially got all four uprights done. You can see them like that Let's see We got them a little uh loose, which is good All of the holes are facing in like this Unlike this, which is what it asked me to do Which is good And like I said on the basis it actually shows that much better than the instructions do Definitely definitely showed that much better. So step number two Or part number two is what they call it part number two Install the top structure Install the top structure So we need the following parts the top structure um The m m5 by 25 socket head hex screws. We need eight of those which we got Five we got eight washers the four millimeter allen key um Keep the front facing you. All right So again with the front facing me So how you guys out there if you if you were building I know I've asked this a couple of the streams too, but whoever's watching out there Um, if you are building a new 3d printing area or studio or even just a filming Area, uh, what would you add? Let me know Maybe I'll throw it in my budget is My but we'll see what happens so far. It's awesome But my budget is alluding me if uh if I keep adding all these fun things I want to do it's going to be air. Um What's it called air air conditioning and heat in there so climate controlled It'll have If for those of you who don't know it will have a fridge. Yes, definitely my wife actually asked me Are you putting a fridge out there so you don't have to come back in? What else oh what it is is going to be a desk probably actually about this high And underneath it, um, it'll be a workbench like this and underneath it It's going to be all an enclosed area for 3d printers. Um, and it'll also be I like that idea, Tony. Um, it'll also be Filtered I've I got the filtration in before I left for my trip and So we can install that when I'm ready Oh come on Jen. How you doing from Tennessee? Thanks for stopping by So keep the front of the base facing you Move the hot end assembly to the To the position of the aluminum extruder extrusion opposite the motor so My guess is what they mean is Here's this motor here move it away. So that's a way now Let's see what's next Place the hot end carriage on top of all four frame extrusions Um ensuring the motor is at the back of the frame Line up the pre-drilled screw holes on the top of the frame With the holes on the top of the carriage and tighten in place After four screws on the top are tightened use four more m5 by 25 screws and washers Too fast in the corner brackets in each corner of the assembly So If I see this right They say Make sure we're Placing up here. There we go. They say to drop this on like this So this is the back it's closer to you guys back um I don't know old curmudgeon Um, you can if you're into any of the facebook groups A lot of those guys there's there's people out there that advertise the returns a lot This one is actually straight from creality Instead of sending me a brand new one. They sent me the return unit, which is totally fine with me I really appreciate Creality for doing that. They did not have to do that at all So the first thing they want you to do is uh This is the front. This is the back and make sure that the motor is in the back Line this up and take four of these big screws and go through the top and Get them started This is why I left the extrusion semi loose underneath But it turned in a half to two turns loose underneath that way we can make sure everything's Good and straight One thing I really like about this so far is Just judging by the There we go. Just judging by the bill. There's not a lot you could probably get offline Because it's a big box a big square like the end or three as we all know It was pretty easy to get off And not be straight so Then they want you to take the allen wrench And if you watch any of my videos I used a big end For the long end to get it down to almost tight But I never tighten it fully with that end because it Will definitely strip with these really good creality hex keys Our allen wrenches Yeah, tyler's right. So and the other thing Maybe tyler can back me up once you once you buy from some of these guys Then they'll just start finding you so Which is kind of cool because they'll they'll come to you and offer You know, hey, I got these return units if you want them or are you interested now just remember though What's going on here just remember If you do get a return unit you never know what you're going to get so It is a literal crapshoot Whether you get a crazy printer or one that you know was semi put back together like this one This one didn't look too bad out of the box We'll find out when we get it further together if the power's on and if it works because You know, they sent it back for some reason I'm really hoping they sent it back because their wife was upset with them and They needed the money That means nothing's broken. So I have all four of those in they're not tight tight But they're in the next thing it's asking me to do Is to do the four other ones. So let me turn this just so you can see The ones so far that we did were on top here The next ones we do are in the sides here And that's what we're gonna Uh do next I was just reading tyler's Yeah Tyler gets a lot of offers One of the videos that'll be actually coming out soon. Um, Caleb's working on it today is a Is a different video than 3d printing I was offered I said, yeah, it'll be fun. We'll make a fun video out of it. It'll be that'll be a good time. Um Yeah, so They definitely if you watch some of the groups They'll always they'll offer them in the group sometimes But just remember like I said, you never know what you're gonna get when you get a return It could be a total basket case Um Luke is a good example of that he got a He got a basket case printer recently um His friend he he bought that they did a deal a while back Where you get a cr10 s pro and get a free under three And I think both of those were pretty rough for his friend um nice Contacts for g-tech and artillery that would be sweet so at this point I'm not again. I'm just putting this together per the instructions. I'm not going through luke's guide Luke's guide is going to have us fix some of these squaring issues um, but This is strictly just the creality instructions to get it going like someone would straight out of the box so right now I don't feel like you can Do much more tweaking once we got these into the sides that really was shirring everything up um, and I'm still a little loose here and I Which is The way I left it nice. I don't feel much play in here anymore. So what I'm going to do Nice No complaints That's good the other the other thing With tyler saying is he doesn't have any complaints because a lot of times it and tyler correct me if i'm wrong But a lot of times they'll If you know what's broken, they'll ship you the parts So even if you have something that came and it was it wasn't good Maybe a board was burnt out or a stepper motor or um Maybe one of your end stops if you know that and you contact them They usually will replace the parts or send you the parts that you need No, there's no website or anything. You just got to find If you're in the the facebook groups and stuff, you just got to find the people posting Once you get a good report with them, they'll then they'll start out. They'll come to you all the time I think I did that one. I did that one This thing's looking pretty awesome Correct tyler says if you didn't see tyler's link earlier He put the c3d link in the top And I think did you do the uh printing service? He started the printing service too Which is pretty awesome. I'm all about sharing the wealth This this community is pretty awesome like that So now everything's pretty dang tight. I can't even move. I'm going to go ahead and tighten up the bottom because why not? Yeah So my video is mirrored because I think my I think the camera I use is crazy We we've tried to flip it and it won't flip but that's okay Some people say I'm backwards anyway Yeah, we did we checked the settings too um I wish I wish I knew I'm gonna get a different I'm gonna get a different camera For the next stream and we'll find out if that's For sure, right nice I thought they fixed that michael, but Apparently They didn't or it's my camera It's very possible. It's my camera because it's just a cheap It's one of the cheaper logitech's doesn't have a ton of settings But I did notice if I Figure out this stream labs OBS right I am not using that right now mark, but when I did Um, I was able to flip it in that problem is I haven't had enough time to know how to use that very well, so I did not want to mess the stream up I officially got Everything tightened in for that step And it is getting warm down here I turned off my uh circulation because I didn't want there to be extra noise Is Bottom tube is the bottom tube. No, it's not this is just sitting up here for now This'll This will move. It's just hanging out for now Message retracted. Uh-oh. Let's see Does it seem solid? Yeah, I mean this thing This thing seemed really solid now Which I really like So yeah, I mean it's not not moving now that I got them all tightened And don't pass out from me. I hope no I think my wife said she was off work and she was going to stop at the store and Then she'll be over here and so hopefully I won't pass out and show if I do she'll find me. No If I do Someone's watching that lives close. He knows how to find me anyways What's really cool about this guide and it's hard to see From way over there, but in the guide it actually says points to be aware of and it gives you warning points um You know the base chassis and hotend fan must be facing you before installing the tight or the top screws must be tightened first And then you have to screw the side ones in Facing uh facing your top side y-axis passive block. You can adjust it to adjust the timing belt tightness so it's actually In the manual itself. There's actually points of warning in the bottom of each page, which is pretty cool three hours away First Travis is three hours away. Uh-oh 37 seconds There's a there's a joke in there, but I won't throw it out there Next the frame assembly part three we're going to put the z-access frame On so what we need is now four more of these Screws here what are those are five by 25 screws see if I can find a uh There we go And then uh, and then we'll go from there. You know, I just thought of something I'm gonna try this. I don't know if this will be any better or not but what if What if I do this So I don't know if that's any better because of my light over here But you can see what I'm doing down here at least I don't know Yes, 3d maker new did a video recently on the uh inter five um Maybe when I'm Working closer. I'll do that Not too shabby someone said. Yeah, so 3d maker new did uh Pop he has pop cup with a popcorn machine equals winning That is a true story make some popcorn if I do that. I'm going to get extremely hungry I had breakfast this morning in a dentist appointment and I haven't eaten yet. I had a little bit of trail mix. That's it But I love the popcorn machine. It's fun and You probably didn't see it because it's hiding over there, but we do karaoke in the basement here too sometimes so Um Yeah, you're right mark But I've seen and I think we probably all have I've seen some amazing prints come off these just stock If you look at narisse's stuff He has done he he put that smaller nozzle on and he has done some just awesome prints on a stock inter five So keep the front facing you. All right, turn that back around again That's gonna be interesting because i'm filming um Make some popcorn sing some karaoke All right So then what we want to do is place the z-axis frame inside of the previously assembled frame Making sure the motor is on the bottom Attach the frame to the lower and upper assembly with the screws and the washers The upper and lower extrusions will have corresponding pre-drill holes for these applications And So the the three points to be aware just so you know, um, yeah the heavy prints i'd get you Um three points to be aware the z-axis frame must be installed inside Mounting the plate The mounting plate i'm sorry the z-axis motor must be on the bottom And the screws in the lower part must be tightened first So it is cool that they're actually going through and taking suggestions You know If you feel that the hot bed assembly is not convenient to install in the square printer You can install the hot bed assembly on the z-axis frame and then mount it if you want Which is the next uh We'll do it this way so It looks like this So it has Let me change that and you can see it closer up. Um Yes, it's amazing on the quality. I just reading that So Let's see if you look at here you have your stepper down here Um, and then you have two guide rails here and your z screw in the center So that's pretty uh pretty sweet. That's what the back looks like And we are going to install that In the back and it has to be on the inside Let's see. I just reading chat real quick um Yeah, the ender three pro For sure has dropped Which is awesome because If you can get the pro get the pro the power supply alone is worth it So it looks like We're going to secure this in here It's going to sit in like that Then Uh, we're going to tighten the bottom ones in first, but I'm going to put the top ones in to hold it up So there's pre-drilled holes And when I do a full build video, I'm actually I'll zoom in on this just like normal But there's pre-drilled holes And all you've got to do is get this bad boy put together so, uh Saving up for a prusa nice I want a prusa, but I don't want a prusa You know, I I think it would be really cool to have so I can play with it and check it out and and print on it um But the price is is up there for now. Yes, there's just oh my idea I'm at the bottom monitor monitoring chat. We can't hear audio. That is hilarious I Tyler's at the bar still still monitoring the chat, but you can't hear the audio So if everybody says hi tyler go ahead three print blanking. How's it going man? So I got Let me see if I can turn this here. It's going to be hard to see I don't know if you'll be able to see it or not So Ah with that light thing it so there's a screw up here a screw here And two screws down here and it says get them all in And then go ahead and tighten It says tighten the lower part in first So that's what I'm going to do. Sorry about that light Hi tyler at the bar Oh good question He asked what bed springs he came with Um No, it comes with the yellow Let's see Let's see if I can show you here Comes with the yellow springs Which really is pretty awesome from the factory unless this guy put him on it and returned him I'm pretty sure he would have done that So that's pretty awesome Tyler at the bar Oh Seem one at murph. Yeah Chris um Let's see the alpha is pretty awesome They're working on it and I'll probably definitely have one of those Um Irf is going to be awesome tim was just showing showing it off. Yes. He was Builds going good so far If I wasn't talking we'd probably be done, but that's okay So i'm going to go ahead and tighten the bottom And Get those nice and tight Irf anyone else going to irf I'm going to definitely do my best to get there. We have a wedding Um that friday night But i'm thinking if we can fly out early saturday Morning and then go to irf and hang out You know saturday sunday and come back monday That's what i'm going to do Maybe Maybe the guys that C3d or or th3d will let me Throw my suitcase under the Ventury table or something. I don't know Way too far away from me That's funny All right, so I got all of those In something to remember just be careful tighten these things and you don't want to Strip out these extrusions as well The tight is good. Just make sure they're good and tight and then don't over tighten them So all that is in if I turn it backwards here you can see Do you see here? This is all in here good. It's actually really solid. I like it Murph was definitely a good time So that is in Next It's mounting the hotbed So we're going to keep the front facing us again Um This is your hotbed And it's going to be mounted Now i'm going to switch cameras so you guys can see norway That's awesome That is pretty awesome I'm gonna try I'm definitely I know he can't hear me because he's at the bar, but I'm gonna definitely try Um, so this plate here If I tip it down Right here. This is where we're going to install our bed um And so this is the bed And this will show you the springs that's better. So you see the yellow springs in here right here That's awesome And then what we're going to do is These holes here We'll screw into This plate that we just put on so It looks like it goes on top as well, so i'm just reading um We need four m4 by 10 so I don't know if we have four m4 by 10s. I hope we have four m4 by 10s. Let's try these um I'm probably not going to go to wambam I'm probably going to go to the new th3d magnetic bed If I switch to a magnetic bed Um, it is the stock one does come with it, but I haven't had good luck with the stock magnetic bed um I probably will switch to That must be them All right, so I'll probably switch to um, the new th3d magnetic beds If I do a different magnetic bed that is old curmudgeon good point Let's see These will fit I'm just checking all the screws I have because Basically it says I need four of these uh m4 by 10s And I don't know that I have them Let's just check something here so What i'm gonna do is change this back so you don't have to look at me that close And i'm gonna get out my caliper here and i'm gonna see What size this uh Size this is I'm hoping it's 10 I believe that is 10 which would be very good for us putting this together So in the pictures they show a black um m4 by 10 socket head screw and Maybe they're just showing them that color because they're that color But the ones I have are definitely not that color. They're silver. There's two three four Hopefully these are the right ones So we're gonna go ahead and put the Hot bed together Yeah, that must be so um What it says is Keep the front facing you which is the front is actually on this side right now just so I can show it easier here um And then mount Make sure the counter lever bed is flat All four screws are secured And then what it does is it sits on like that so One two three four what's weird is They actually gave me quite a few quite a few more screws And in the instructions it says you need four But there are one two three four five six There are six total screw uh Screw holes in this thing So We'll do the four first and if I have the extra one i'm going to go back and do six in there Let's see. Sorry. I missed some of this chat here. I don't know when the th3d one's coming out. I think soon um nice Some people like to see mag some don't Yeah Ultra base on the pro and love it um Andrew s that is not cool. I hope everything's okay Holy moly 22 years old Um use all six someone says that's what I'll probably do Someone else says use all six. All right. We're using all six I like it I'm all about Making it nice and secure I know that was the worry with some of these Is that the flex in the bed? I'm going to get a couple in so I don't have to hold it here the whole time And then We'll go from there. It sounds like my wife is home Man, I hope hope everything's okay. Andrew s What's what's crazy also? I'm going to take these out. So they gave me lock washers with all of these But they didn't tell me to use them in the instructions But I'm going to use them because I prefer uh to use lock washers and not have these things Turn themselves back out So we'll do that at these cables. Keep getting stuck in my hair Holy moly Hopefully, uh, hopefully everything's okay there Andrew That is scary. All right later deon Have a great night till uh Tell myself hi I appreciate you swinging out so Just so you guys know what's up. I'm installing the uh the whole build surface here um The hotbed as they call it And it says to use four of these screws with no And it doesn't say anything about these lock washers But they they include six screws. There's six holes And there's lock washers. So I'm going to use All of the above just to make sure everything's Super secure now personally, I'd rather have the six in there. I think it'll be more secure and maybe uh Some of that wobble I think 3d maker dude was talking about will be taken out. That would be awesome Yeah, I hope he's okay very young For that to happen So when I tighten these down, I'm actually going to go back and forth I don't think that's required, but it's just something I like to do I'm going to go one side to the other side and then work my way in get them all You know just to tight and I'll go back with the uh small part here and tighten them up This one I'm just going across 3d print biking Oh Let's see Yeah, my guess is nice Maybe I'll check that out and I got a in luke's guide. He might have something for that I haven't gone through everything on the under five yet because I didn't have one um So just uh, I think you're flagged yet 3d print biking. I'm pretty sure I just flagged it because you swore in there, but That's okay There goes my helmet wrench. So all those are tight We're in that's awesome onto the next Uh Onto the next thing Don't forget if you didn't subscribe already, please do I really appreciate that And thank you so much to everybody who has thrown five bucks out for a beer or coffee or whatever you want me to have A taco. What's today? It's wednesday. So it's not taco Tuesday. So Um, but thank you so much for that. I really appreciate that every little bit helps and especially when we're building the new studio Um We're gonna have a lot of cool stuff in there. I hope and and I can't wait to show you guys Uh, as soon as I get a little more done I'll get I'll do another like walkthrough so you guys can see it um Let's see Now we just hope everything is flat and straight So now it looks like we do the display the extruder and the rack assembly so See what we got here This is the front So i'm going to move this over And it looks like our our display is going to go on right here We'll do that first Oh nice So they actually left the screws in this which is great um kind of Weird let's see. Oh it goes on with tea. Okay. It goes on with tea nuts so so the uh The display in this case has the plastic still on it. So that was awesome um, it uses tea nuts to put the display on Which is pretty cool because you don't have to uh Screw it in Let's see You guys want to see that being done I'll check the chat in two seconds here. I didn't look at it for a few There we go. It's a little better. Um Yeah, no, Andrew. That's crazy man. I hope it's everything is okay You know, uh old curmudgeon. I don't know about that. I think it prints pretty dang good for what it is and I don't know if it'd be worth converting it or not I think it'd be a lot of work to convert it Now 3d print viking. I'm not sure. Um, I don't even know what time it is right now. It's about five o'clock I'm going to get this put together. I'm going to get it turned on and maybe uh, maybe we'll start a print or something Um, so maybe maybe another hour Maybe less Um Wow, hope everything's okay with him. So what I'm going to do is block nuts right here If I can get it to zoom here Oh, that's not good. Anyways, there's two here one goes in this upper one goes in this lower and uh, you just got to line them up One goes this way one goes that way you put it in this corner and Once you get that far grab your allen wrench the correct allen wrench And just turn it So it turns those T nuts there So to lock them in I can see that one didn't turn There we go. Now it turned That is still not the right one. I thought I was crazy for a second, but maybe not Oh, maybe it's this one Nope. Well, that's weird officially either I lost an allen wrench Or none of the five that came with this thing are fitting these Which is really weird Thought maybe I dumped it on the floor. I'm pretty sure it should be this one. That's not doing nothing. This is the next one Yeah, maybe you guys see it. Is that a delta in the corner? Yes, it is That is definitely a delta in the corner It is a That is a uh, see me CNC Rostock Uh Rostock max v4 I'm just looking for the other uh allen wrench that fits these Screws and I might just have to grab one for my kid It's hoping that all the pieces would be here, but if it just one allen wrench, I'm not going to cry about that Yeah, these definitely don't fit crazy Well, I'll grab one for my other stuff here So basically These will go on like that But unless I drop the allen wrench I'm missing one. That's weird that I have five None of them fit So I will grab that and I'll go back to the other view here Any questions so far? I know we uh, we've been doing this for a minute Give me one second. I'm gonna grab a different allen wrench here. Let's see Get my mouse out of the way here I'll turn this so you guys can see it That that one is too big too So that must be that one that's crazy There's five allen wrenches here and not a single one fits in there that fits in that one You know, I wonder if they rounded that top bolt I mean that top screw That might be Why? Yeah, it's just spinning Bet you it's rounded That explains why it's not fitting Let's try this side Kind of bites actually that side kind of bites I'll grab a different bolt after the stream and replace that. Luckily. It's just for the the screen Yeah, nice. So you've had your under under five for four months. It's been solid so That's on there So I'm gonna spin this around and we'll put the We'll put the uh cable in So it's like the other ones it goes in the closest one to you I'll look at the instructions to make sure but usually And then it wants me to Install the See Hope there's screws on that bad boy. So it wants me to install the Uh extruder here, which is right here And it looks like It goes on with t-nuts as well So let me see if there's another t-nut in here somewhere Might have found something that's missing Nope, so it looks like I have the It looks like I have the uh Bolt, but I don't have the t-nut part what I'm gonna do is take one off of the filament holder And we're gonna use one for the filament holder because the extruder is more important two t-nuts m4 by eight That would be this guy Right, I agree stonewallis. I'm in yeah. Hey tim welcome to the mirrored party Remember when we couldn't get it changed last time it didn't change again this time Tim's on th3d. We were just talking about you It's probably scary. Let's see We were just talking about how we were They asked me if I was going to put a wham bam on this bad boy and I said probably not If I change it or when I change it, I'm probably going to go to the new th3d Magnetic plate Your video is freaking me out. Oh, I'm sorry That is the only one that fits I have to cheat on these t-nuts because They didn't uh, they didn't include them all when they return this thing. So I'm going to cheat and take the ones out of the School holder to you know just for now I can get different ones and put that together later Now the question is Is it the same size? Can I make it work That's the question the answer is no The hole is not the same size darn it I should dig through that box real quick just to make sure but As of now There's only one t-nut left here That will fit the bolts that need are needed for the extruder So We are going to check. I'm going to double check and make sure it didn't fall off in that box. Give me one second here But I'll tell you if I'm only missing that for this whole thing. I'm I'm in I'll take it Just in case that is awesome Found it in the box Heck, yeah, whoever put this thing back in that box. Thank you so much You are awesome probably Stonewallis if I had to go to check that I would I just wanted to make sure and sure enough I have them both now Which is awesome so what it wants us to do is put the Extruder on 80 millimeters down from the top and with the t-nuts I'm going to change this camera here so you guys can see so This is what we got going we're going to put The extruder on this side here And we're going to use these t-nuts And then we're going to measure down it looks like um 80 millimeters down from the top And We're going to put this thing in that way But first I got to put the t-nuts in the right way How's everybody else doing out there? Still with me still hanging out I don't know how many people are on are watching but I I definitely appreciate it. Thank you guys and girls this will be So should be fun when I get that different studio built then we can be able to do a lot of cool stuff in there A lot of space So I'm going to put these in Grab my Allen wrench Hopefully I'm not frozen I haven't seen anyone comment for a while I moved this thing up Did I see what? What are you talking about, Tim? I hope other people did Hey, Tony have a gray one Don't want to be late for that Italian beef. The stream is good for me. Oh boy Oh, that's funny So basically I think Tim already built one of these because he has one sitting in his print farm. I remember you had a stream on this one Oh my last one Too much too much That video is hilarious by the way That was that was hilarious for a long time This top Tina does not want to there we go Now it's holding So what I want you to do is put that on there and then measure 80 millimeters down from the top Hey, Tim, I heard we're putting a new Magnetic flex plate on this It sounds like a good plan. Uh-oh, you got something tonight together for me. I like that idea Nice Speaking of that Uh How about does it what am I doing? I forgot I'm looking at this Side view here. So it does uh Does that ship? Oh, yeah, thanks for the shipping instead. Um, does it ship with uh something of the 32 bit Variety as well. So what I'm gonna do is find 80 millimeters Out right there And I'm just gonna do what they say and put it at about 80 It's about 80 right there Ah, and then I lost it Figures right close enough close enough This thing doesn't print good because I used 81 millimeters or eight or 79 that I'm in trouble So we got pushed back to monday got it so I just put the extruder on And as you can see it sits on here. It's roughly what they tell you in the instructions is to come down 80 millimeters from the top So we got 80 millimeters to the there Which is awesome Hey tim, uh, I'll chat you when I'm done here too um Ooh Prototypes are okay as long as they work. Well, unless you'd rather Video, excuse me unless you'd rather the video be in and what the packaging that comes with That is up to you But here we go. So Also tim If you want, uh, I'll chat you when I'm done, but we could replace this with something new that you have as well Um, but I'll chat you when I'm done. I can buy that when we're ready I think this would be a perfect, uh Example printer for that to go on I like it. So we got the extruder on They keep talking talking. I'm not gonna put the Yeah, yeah, I can I'll put it on there because we're doing it So the next thing we got to do is put the uh filament holder on and Well, I I already know that the prototypes work because we saw them working already Oh, I got I got a lot of review pack to do. I don't know if kody's watching but um I have a Direct drive for the under The under three that I need to do as well I just got the official notice Dinner at 6 p.m. Thank you, honey A little review pack I like the sound of that a review pack So the uh, it appears that our filament Roll and holder Go right underneath and I'll change over that camera again There you go And it appears like It goes on You put it on, you know, like the standard creality spool holder here and good 3d printing and painting doing good. Which d drive on the enter did you get? I can't say now, but you'll have to wait and see soon. There'll be a video out. Actually, uh, kaleb's Working on something now and then I got to resume the upload for the other two which are firmware based And then we'll go from there. So This is supposed to be down at 150 millimeters if you're measuring We're going to put the filament holder on and it sits on just like that um down here Strewed it up here And it says 150 millimeters. Uh, we will see These are always not my favorite to put in because They suck No, not because they suck because I suck at putting them on because I uh Try to get that allen wrench inside of there and it's Not my favorite thing to do on creality filament holder But that's okay Uh Don't think so Not cable drive, but that would be sweet I'm talking about zesty nimble. I think And I can officially say it's not a zesty nimble Like I said 3d printing and painting doing good hanging out so they say Oh naturally Learn how to use t-nuts. That's a good thing to do So they say to put this thing in at 150 millimeters So now if I can just get the T-nuts to spin for me I would be a happy camper No pressure No pressure Oh my god, how about I bring it closer to me so I can actually do it? And you guys can still see over here. All right. Now we got one. We got two maybe Apparently I suck with t-nuts Let's just go let's just go there We'll just go there right now Bed support so they don't uh sag I definitely check that out. I saw 3d maker noobs post and That was pretty cool or his video he made That was pretty cool talking about that as well Hey, I got um You many Christmas that took way too long. Okay. So now it says To put that at 150 millimeters Yes, haha reset 150 That can be right. Let's look. Oh 150 from the ground That makes more sense. I was gonna say that's pretty tall. So what they want you to do is take 150 here You know basically from the ground and put this up I'm gonna put it about right there because I'm off off of the ground a little bit With the bottom of my caliber, but Yeah, of course the delta still works. Uh, it works pretty awesome. I need to get some videos done on it The problem is this table I'm on here Um is too tall The ceiling is too low above it. I cannot work on my row stock Um max v4 on this table or this bar because it's too tall to the ceiling So so uh the videos for the The row stock will be coming up as soon as the new uh space is done because then I'll have actual room But it does work and it works very well If you guys need a delta printer The cme cme cnc printers are pretty awesome The thing is fast too If I print the same thing on that versus an ender three, it's usually Close to half the time it takes to print it on the on that row stock over there. All right, so we got those three done whoo Now we need to It says more display stuff. Okay. We did that perfect Tube and wire connections so Step one for installation of the line And we need to move To the back of the printer to facilitate facilitate the installation of the line and check the wiring for damage So what they're saying is let's go back here We're going to check the wiring for damage Well, this is a return unit. So I have no idea But yeah, that's the reason why I haven't gotten any of those videos up this Area right here is just too short. I can't put that printer up here So when I was building and I was doing it piece by piece and it worked Not so much when it's all put together so Step two final letters on one two three five six seven and nine and the wire harness Insert it according to the position indicated by the red arrow on the drawing After insertion gently pull on it to a servant's fully seated and note that x y z four one player course Four wug. Wow. If I could talk four wire plug corresponds to the motor so What it wants us to do Is in the guide here. There's actual numbers that you can't really see And then it wants us to Basically one through nine connect all these wires up. So the first one is our x Um, so what we need to do is find the x uh, let's see Find the x wire there it is And How do they suggest wiring these things? I did see some really sweet wire management cable management. Um On Thingiverse actually someone shared it on facebook and they had some Thingiverse stuff Out there, which was pretty awesome So number one looks like the x and stop So on this cable, there's two x's My guess is one goes in the motor Right here I'll turn this around so you can kind of see it One goes in the motor here And one goes up here in the end stop In and in now if I keep This Quit bs and then start putting this stuff together. Maybe we'll get a fire up and make sure we have no smoke um, so the two are x Number three is z So let's find z here That is the smallest one and z Looks like the smallest wire And i'm going to grab that it's connected to this really long one here too That both Say z anyways So this one is going to go underneath and it's actually going to connect to this assembly that we put on Underneath So i'm going to go ahead and connect that like that perfect Number four the display So we already did that in the back here so we put that in already number five is the y so We will find we will find y That's another z Oh, but that other z is probably for the end stop up there So where is y number five? y That's extruder that's x that's x We should have a y somewhere That's another z Let's turn this bad boy around and see what we're missing. That's not that That's a z Interesting Make sure I didn't put it up here, huh? That's x And that is x So let's go on and we'll come back and see what's left Um There's another z in the end stop so we need to do that one. That was this other wire here who's going to come up and Plug into that end stop I'm going to have to figure out how to cable manage this. This is kind of all over the place anyone, uh, I think someone else who was it Uh said they had an under five out there How was it cable managed like crazy or what? That doesn't work interesting I mean this this is our Z end stop here up at the top and that wire is just like hanging out there I don't know if I like that We'll figure that out Uh What's funny is this says x And x as well so, you know I wonder if they got this far And didn't know what x was Because I have two sets of wires that was anyone having video video issues Hope not So I got two sets of wires that are labeled x So this set and this set All of them are labeled x so I know we shouldn't have two sets of wires labeled x so what we're going to do is we're going to put this up for uh z anyway I'm sorry y anyway and Then we will See what happens If I have to switch them we'll have to switch them so Let's see. Where are we going with this? y end stop which will be right here Stream is good. That's good kevin t Hope there's no more stream issues um And I just do not like that I have to figure this out I'll cable manage this later because My wife said hey, we got dinner at six o'clock. So I got a rock and roll here So I'm guessing this is the other one. So what I found is and this might be the problem That's why it probably doesn't look like this printed at all either. But what I found is There's two sets of x labeled wires one here and one over here obviously one of them has got to be y's but Why but what I'll do is um We'll we'll hit home and we'll see what happens because I think I can just home the y on this When we get done That will be interesting All right, what else we got here extruder That is Oh, if I get this thing spun around that thing is solid. I love it extruder here Don't forget if you haven't subscribed and you're watching and definitely appreciate that Click the bell if you want to hear Notification if you want to know notification when stuff gets released Three videos in the pipeline Tim if he's still on you said We have a little review pack coming from th3d, which is awesome So we'll get those videos up as soon as possible I also have one I need to make for kodi and tyler at c3d and that one will be the next one I film after this That is for a direct drive system so Let's see once we get all those done it says connect the white ptfe bowden tube to the hot end And firmly seat it into the extruder so that would be our Bowden tube here and we're going to firmly seat into the really good Bowden couplers that we don't know about I'll replace those Not right now, but I will replace those uh later So that one's in good This one is in good into the hot end And that thing is really cranking really pulling hard on that too um Plug number four harness in To the display board. We already did that Check all harnesses are securely connected So the exception of this Everything else looks like it's pretty good Now the next part of that is just to connect all of The rest of the wires. Let's see. I'll change this again Test don't guess you're right We don't need no magic. We don't need no. We don't need any magic smoke So I know it's hard to see maybe if I break it closer here So the next thing we need to do is plug in all these wires that go together and Honestly, I'm gonna have to figure out the best way for this to run Because it just does not run good. I mean we don't want them there Because that'll be that could be in the filament path Yeah, we'll work we'll work on it, but everything should be labeled here So we're just going to start putting these all together so The first one is this one and we'll All of them only can go in one way And all so far all these wires are Also the same color which just makes it pretty dang helpful That clipped in We got blue and yellow next go brewers Um The next one we have is straight white now. What is this one? So there's two straight white ones left One is the nozzle thermistor and one is the bed thermistor. So right now we're doing the nozzle. So we'll do that one Anybody else out there are my talking mostly to myself right now So here's the bad one here, we'll push that one in That clipped we're good And last but not least They're really Good xt 60 connectors Um, that will probably be replacing pretty quick here so we're going to go ahead and plug those in now Just looking at the the manual here it does not say Anything about where to run these wires So as you can see they're all just kind of piled here and that is not cool So what i'm probably going to end up doing Um, especially these here these need to go through the back here But i'm going to cable manage them and I know there's a bunch of people out there that have already modded these have already, uh had some awesome Ideas for cable management. So i'll probably jump on may on their stuff I know luke has some ideas too. So i'll talk to him Um get his ideas But yes the voice isn't the head keep me company That is a true story, huh? There we go. So now we are all plugged in Um, which is awesome Now there is One thing I noticed they did not send back was the power cord That definitely did not get sent back in this box, but if that's the only thing i'm missing Then I will take it. So what we'll probably do what we got about 20 minutes left if that I can stream I got to go up Uh for dinner So let me get This is what's on the way And I think what i'm going to do is um Okay, weird. So what i'm going to do is get a power cord and As long as we're all plugged in let's see if this thing fires up and see what happens So I got me a power cord And it goes on the other side So i'll shoot this around So you guys can see it The power cord goes In the back in the bottom here, what i'm going to do is slide it underneath the extrusion so it's out of the way we're going to plug this in and Right here There's a switch And that's an on off switch So, uh, I'm not sure who else is out there still But I think it's time to uh Flip this bad boy on to see what happens Cross your fingers here So we have a screen We have an ender five, uh Splash screen hopefully that's out of the way So Right now we have power So I think if we hit the button We go to pre-precare We can do move access And we'll just do one millimeter And we'll start with the ones we had issues with Which are the y and the x so The y Should be up top here So we're going to quick it not correct Let me see Unless i'm crazy Okay, so that that could be right Let's see Let's go to Move access here We'll see what happens when we auto home So that That was fine right now So looks like Either this End stop is not plugged in or just the wrong one So let's check it Don't wait. Yes That's uh, that's a good chris reilly. Um, he definitely Does that don't break don't break don't break so Which one was this this was supposed to be The one we thought was x So let's see if we swap we swap it with the other one we thought was x You know It did pull this over though and this time i'll be a little more careful Have to No smoke no smoke no smoke. I love it. That would be funny. Yes It does not like that one So either that end stop is not working or that's The one that is uh Miss labeled So Just looking here to see if they have any other issues Z So let's unplug it probably uh Check that cable isn't crossed over. What do we got cooking here? So this is x This is x This is x and Yeah, let's try something Well, these two we know this one worked and this is x as well This looks what happened if we swap them So there's I I bet you this is what somebody returned this for A subscription prank and in the days pass slam the house door turn off the lights I'll double check the board level next but Let's check like I said, we've got two cables that are both labeled x and It can't happen. So let's try this trial and error Like you said chris riley would say don't break. Don't break. Don't break okay, so I swapped the two x cables and We will plug in again Across our fingers. I mean if I was a brand new To this I'm not saying I'm a veteran But I'm brand new to this and I got this printer brand new And there was two sets of cables that said x I'd be like what the heck's happening That one stopped that one stopped ha ha That might be perfect now. Let's see this one's gonna take a while I Stopped them so they wouldn't be all crazy, but that did stop so it stopped both directions at the top now You know apparently the bed raising here is is going to take a minute But we can test it here There you go. So all three end stops now work Which is awesome i'm gonna fire it off just gonna move it and then I'll look at this bed's dropping and I'll fire it back up. I'll actually let it home because uh It's got a new catch for it x plus x equals y I like it So now I'm actually gonna let it re-home properly So it knows where things are Now while that's doing that because it's gonna take a minute There is a lot of instructions in here now about adjusting z and and um We'll have to go through all that loading bed leveling Loading filament software preparing to print All that stuff. They even gave a circuit diagram for the board Right there too, which is pretty awesome so I'll have to go through and probably dial this bad boy in once we get it leveled and Ready to go. I don't think Yeah, there is a little bit of white filament sticking out of that nozzle, but I I don't know So I'll probably uh, and not probably I'll replace the Bowden tube Of the ptfe tube. So that's done um replace the couplers we'll get those done and uh That's funny What time we got About 10 minutes here Somebody was close on their leveling. That's dang close um I'm gonna drop it down a little so I don't hit anywhere But what I'm thinking is Two tech two times tech I love it. So I think the next thing we should do is um Let's drop let's disable the steppers And let's heat up everything make sure it all heats Disable all but you notice We're dropping here when you disable the steppers that will drop your z Which I'm okay with Unless you lose power then That isn't doing your trouble It looks like it's not cool. So let's heat this thing up and see if it heats up now We'll just preheat pla for their stock settings 185 and Um, that'll go first and then it'll do the then it'll do the bed But right now it's preheating the nozzle to 185 So so far this thing's been pretty cool. I've I've got really lucky. Um Z-axis supports fix the bed up. Okay, cool UPS for power cuts for sure the new shop, uh, the new studio will have that Um, I got real lucky at so far with this return knock on knock on wood I even found the That t-nut I needed in the box My thing I didn't come with this was the power cord, but that's okay So we're heating up and it shows heat on the screen, which is great Can't really see it um Feels like it's getting warmer Uh Put a uh, put a thumbs up or I guess not a thumbs up. What's the what's the thing? I get x or something in the chat. Is it if you've ever burned your fingers on the nozzle Because I have I think most of us probably have We're almost there 179 and it's going to 185 nice I got a return from the auction bidding local pickup. Nice Tony put a bunch of x's in I've done it. I get um, I get Inpatient and I go to grab filaments out there and Oops So we're at 185 now And it is hot. So that's good. So The bed is not heating up currently, but it's not telling it to yet either So I wonder if their DLA does not heat the bed So let's just go do it ourselves control temperature bed Do a 60 So I just told it to go to 60 degrees on the bed And it's rising now, which is great. It is like we talked about it is that magnetic flex that Ender or that creality has um Mixed reviews on this. I haven't had good luck with it yet, but You never know we're gonna I think what I'm going to do on this one is uh On this one. I'm going to drop that new uh th3 easy a bl on it. I'm pretty sure that's what I'm going to do That thing is awesome So I got uh, just a few minutes left here Any last questions anything else? I know we didn't get it printing, but I talked a lot We got it built and we figured out that those X cables, uh that were labeled incorrectly We're fine It actually homes and all the end stops work, which is great so far it heats up I do have heat Definitely have heat on the bed, which is awesome um Anything else? That's so funny Thank you No, it's okay if you miss someone it'll be posted. Like I said, it was random I saw that nerice wasn't uh doing one today and I got this in the mail while we were vacation Day I had the day off. So I thought you know what we'll get some stuff done and we'll do a stream So I appreciate you guys hanging out and checking out. I'm going to get a new camera for the next stream I promise that uh this one so it won't be so mirrored Which weird is it doesn't show mirrored for me, but it shows mirrored for you I don't know. That's just weird I will definitely print something cool to show it off. My goal in life would be To go eat dinner because um my wife said we're eating at six And if you look at me, you don't call me late for dinner I'll probably that's what i'm going to do. I'll probably grab maybe the other ender The other ender threes and get this one dialed in and just start printing updates for it upgrades As far as the printable stuff goes I saw a couple on those um On the facebook groups and one guy went just crazy all out on an ender five is awesome Okay What's up? Hey luke Yeah, nary's just posted a video today. He didn't he didn't go live. That's why I did So luke She's here the first one And built and all warm Yep, definitely warm on a nozzle So everything heats up everything homes like it should we'll do that one more time before we go just because Now now that I know it's all here because this was a return unit. We got really lucky. Um I'll dial it in after dinner and get a print going and see if we can't get something cool Uh printing and hopefully The extruder works. I haven't played with that yet, but um, I know they returned it for some reason I'm guessing it's because those wires both said x on them and they had them backwards And I'm guessing it just was hitting the sides and people were upset about it It takes a minute to get to the top there, but I know and it looks like there's an adjustment screw in the back that I'll have to learn And figure that out too But Oh nice A new cr tennis pro max, huh? Lucky dog How'd you score two of them? Well, you had a beta one. So that's not the same I mean pretty close, but that's awesome Nice That's cool All right, andrew have a good one. I got a bail too here. I got About five minutes before I got to be upstairs But um, you guys rock. I appreciate it. Thank you everybody for coming out Um and hanging out with me for a while today If you didn't subscribe, please do that. Um, if you feel like dropping me a dollar Or whatever for a coffee or a beer paypal all the stuff is in the link You can use here. You can do it here. You can do paypal paypal is the best um, you can do uh Patreon I haven't really pushed that it's not I have one patreon or patreon right now, which is awesome I appreciate that every day. Um, otherwise Thank you so much for coming and I'll get some posts. Maybe I'll do an instagram Find me on instagram at the edge of tech also twitter at the edge of tech with a k and uh, also Facebook you can find me At the edge of tech as well. You can find me at facebook.com forward slash edge of tech official Don't forget the thumbs up. Thank you. I appreciate that andrew Again, I appreciate it Thanks. I think sitting real nice Hey, andrew just in the time for us to sign off, but I appreciate that. Thank you guys for hanging out with me I'll get this thing printed. Hopefully get a print on there tonight and I'll put it on On all the social media so you guys can check it out in the description You'll find the affiliate links For creality if you want an under five also you'll find one for amazon if you want an under five there Don't forget amazon click on that link and you can search away anywhere else you want and I'll get credit for anything You buy you don't have to buy the under five Even though you want one because this thing is awesome so far so thank you guys you guys have been awesome You guys have a great night. We'll see you again soon. I know I got Uh three or four videos coming up. They're in editing currently now So watch for those and we will see you guys next time Thank you Later