 Hey guys Shea bear here. We've got an issue. Look at all this water. This is the back door. Look at all this Now it's dry back here. There's the main water line Right there that comes in It's dry and then it starts getting wet here and it's soaking wet here And it's dry over here. I know there's no water lines underneath here. I suspect this is being the culprit Okay, it seems to be draining there like it should Now I'm not sure what What caused this I'm guessing splatter water splatter Okay Let's go in here, and I'll show you what's going on now. I've I started looking at this Back in here. It's wet. It's wet back in there And it's wet in here So I am suspecting that our issue Is going to be this air condition Because if you look at this That's water and this just all of a sudden started. Look at that. We got mold now This just all of a sudden sudden started started Coming off there now You know We need yeah, we need a new sink and all that but we're waiting to get it because we're going to do the whole Kitchen we're gonna do the cabinets and everything But I'm suspecting This thing is leaking For a reason um, but see there's a back inside here There's a drain the drains and it's supposed to drain out the back and for some reason it's not so we're gonna take this thing out of here and Tear it apart. We've got a screw here. We've got a screw here. I mean it's pretty well You know these things just pretty much sit in here They'd be careful because somebody I don't know what they've done here on this window, but that's not the way I would have fixed it All right, so let's shit Look what I'm looking at right there. Baby black widow spider All right, let me get that taken care of I'll set you on the stand I'll get those two screws out because there's one on this side. I'm guessing I'm gonna pull it this way So hopefully everything goes all right. I want to do it from out here, so I don't get all that water Inside any worse than what it already is, but I can't seem to get the window to go up a high enough We'll have to go in and see what's going on All right, looks like I'm gonna have to do it from in here Damage is done once we pull this out before we put the new one in I'm probably gonna have to put new drywall there Looks like maybe something's going on here. I don't know so here shouldn't be doing that I have to pull the cup pull the this off of it We're gonna pull the back off out of our way, but looks like they've got them screwed on the sides Real concerned about it. Let me see if I can get it out here and get it set down here I'm gonna get it set here, and I'm gonna move you out of the way because I gotta carry I'm gonna carry it outside and clean it up. So carry it outside now So go take this thing apart. I'll give credit where credit is due Ford Does double for something more than just a boat anchor It makes a good workbench All right guys I've got to go in couple screws on the sides here. There's one there one there I'm not sure what's on the bottom And I've got some screws along the the the sides down here on the bottom And then around the back to get that case off so we can find a clog So let me get my screwdriver, and we'll start taking some of this apart Okay guys, I got the screws out for this. There's only one here and one on the other side Now I should just be able to Push this up Yeah, and it'll pop out. There's a little I'll show this to you Yeah, I know it's it's nasty. I know but it is what it is, right? See there's that piece down there and hooks in right there So we've got to unhook that That's how you open and close the vent so I'm not sure Exactly how that pops out. I think it just flips up. I'm gonna try to do this holding you guys Just like that see Got ridges on there That's what I was talking about So the water once it gets down in there. It has nowhere to go So once that dries, I'm gonna have to get that all cleaned off and it's not very efficient like that so Let me uh, let's see. We got a couple screws up here And they're loose We're gonna take these screws out We're gonna try to get this thing off of here. I'm not sure how it goes in. I think it just pops in there They usually They usually have a couple screws here, but Anyway, I got to pop them off and then we're gonna get this We're gonna get the cage off of it Which I've got some screws down here. I've got to take out along the bottom Sorry limping a little and Some screws there on the back To try to get this cage off so let me go ahead and get them screws out and Get these off and then we'll move on to the next step Okay guys There's four screws along the bottom of each side. There's one in here, but you don't have to take that one out There's a Course you've already got this one out or that or that one. Okay, so we got one two three four screws This one has one up here. It helps hold that now We should be able to lift this right up off of here No, wait, we got one in the back. I lied to you Yes, there's one on this back corner right here We've got to get it out and it should come right up out of there Yeah, okay Now you should be able to lift the cage off. Let's see what we're looking at in here. Try not to break this This is just styrofoam okay, so I'm seeing some rust Some Crap, I'll just show you what I'm seeing down here. It's not good. I mean Their condition is still working, but See look down in here I've got to clean all that stuff out because that water has to run back that way to come out a hole That's in the bottom of it. See all that junk there We've got to get all this stuff out of there So that water can drain back to the back So I'm gonna spare you of cleaning that see there's a drain hole Right back in there that the water goes down and drains supposed to drain out the bottom of it now It can't do that if it's clogged up. So I'm going to see this is all styrofoam here. This is all styrofoam. So be very careful with this So I'm going to get this all cleaned out And I'll be back with you and show you see you can see where the water's been hitting the fan Because it's built up back there and then this had no way to drain back to the back So hopefully I don't have to pull this out, but I'll get out my air and we'll see You know We'll go from there. Let me get this cleaned out guys Okay, guys the drain hole. I was talking about is Right there see that hole. Whoops So that hole that's a drain hole there and what it does all this stuff Like from this condensing unit. We've got it all cleaned off It runs down in behind here down in And drains out that hole there and then comes out. There's a little trough down here. Can you see this trough for my fingers are? Right in there. Let me get a pointer right in there. There's a trough there That runs and then it runs down there and out that hole. Okay? Well, it was all clogged up and all the water was coming out This side out the front not all of it, but 95% of it was so we got this cleaned off as you can see I took this cage off. It's all laying over there got it washed off. That's a little rusty but there's nothing I can do about it because You know when reality gets you and you don't have any white paint There's not much you can do with it, but these two pieces here. I won't take in I'm gonna clean them up These I just hose off. I'm gonna put them back on. It's no big deal. Oh Set you up on the tripod when I do that see they're just taped on with this With this kind of stuff right here Just a couple pieces of tape here and there's all that holds that together I might use a little bit of hot glue just a dab of it. I had to put a hole down there and one Right down in there I don't know if you can see it but to drain this out because I hose did out. I'm gonna go ahead and block him off I'm gonna plug it in and let it run for a little bit though and make sure see this is the hole I put in I don't know if you guys can remember that video or not It was filling up with water right there From the rain and stuff and it wouldn't come it couldn't come back up this way because you gotta have these at a Little angle don't don't leave them hanging way down. You know like you see some people do But barely barely noticeable at a little angle and so it couldn't get back up there as you can see it's draining It's doing its job pretty well there So I'm going to plug it in and let it run a little bit dry itself out While I go wash them up and then I'll bring you back when I put that piece there on it'll get too hot Or it'll melt that styrofoam. So I've got it on low Well, not this one I plugged it in Now I'll never be able to get this part without cutting it, but that's all right Because if this comes apart again, it'll be for scrap But anyway, this one don't have a look what I did was I plugged it in And I waited till it just got hot enough just to squeeze it out to where it's not smoking yet And there it is so I'll show you one more time Down in here Got it pretty much cleaned out See this is why I was talking about these stupid things here. Let me back out a little bit These things I'll just put a little hot glue on them But we got it pretty well cleaned out now back in there I don't know if you can see it down there by that fan. There's another little hole There's an indentation there And it was filling up with water So I went ahead and drilled me another little hole there about the same size as the other one Then we got this one On the back right there So there's that I'm going to try to get this cleaned up a little bit more Uh, I think it's all clear Um, I'm going to go get a toothbrush and try to get them out of there Whatever you do try not to bend them. So let me go get a toothbrush. I want to try to clean them out a little bit And Then I'm going to put the cage on I need to wash this up first Now I'll take that in house and do that and then I'll be back with you. I also got to wash these so I'll do that in house Now let's get this back on here get these tight. I know why they're loose Someone has stripped them Nice, huh? All right now things on And they just get slid Down in here pain to get them started sometimes It's like that but first let's get these screws in here All right Now Get this on here like that Get the other side on it's like Just like that Now we've got to put our side pieces on Which they had them on like this But was it like this? Yeah I Here see that hole It's not supposed to be there. They've put that in there supposed to go in this hole And Down here and I'll see it says it's even got them labeled left and right See the L on there, but they've got it on the right But since that's the way they put it in I'm going to have to put it back in that way so I hate that but you know, what else you know, what else can I do? I got I got a Because if I do it the other way, I'm just I'm going to have to redo How everything was It was done There's just slides in the slot down at the bottom It was in there and these just get pushed In there just like that There you go. There's that one. Well, I wish I could tighten them up somehow Okay, so let's do this one bottom started Push them in there. There's that I'm going to take this in the house and clean it up. I'll bring it out and put it back on there remember that piece There has to be hooked up too. So because that way It shuts it off and turns it on by pulling it out the Vent thing in there. Look, I just got that old dirty again Well, it can be cleaned up This part of it can be cleaned up after it's put in there. Now we've got Two more screws here and I have to be super tight because it's just screwing in plastic now Man, I wish I could do something about that There ain't much I can do other than drill Drill a couple holes. I may do that I forgot to I forgot to hit record, but what I did was I took a couple short self-tappers. I put one in there one in there Now she's tight because there's nothing down underneath her that I have to worry about so now I need to get this inside get a So I can get it put back in I'm going to have to clean these vents out some more because They're not Not very good. There's your little vent thing Open and close Right there Um Then I got to clean them out those didn't get very clean But that's no big deal. So let me get this thing in the house And get it up in the window. I'm not going to film it this time But uh You'll get the idea. Let me get it in there. Let's uh, let's plug it in I don't know if you noticed my hose that there was using my hose Hose just all out look how nice it is now And by the way that hose that is the one That I reviewed here a while back still going strong Next and let it run for a little bit got something clicking in there. I think it's a piece of tape I put down on the bottom, but uh, I want to say thanks again for watching. I appreciate it Don't forget to comment rate and subscribe Say better than myth a man a legend. I'm gone for now. Bye. Bye guys. Take care. Thanks again