Upload

Loading...

~60% Voltage Kickback from Load to Stator Source(ph3)

193 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 9, 2012

Operation of Bipolar TC in Kickback Mode producing effect of load charging its own source of voltage. Effects include excess voltage noted between phases 1 & 3 where this represents quantities being over 180 phased in time. At 13:48 near end of video we have 69.2 volts appearing between 13 volts and 43.3 volts. The interphasal voltage meters with parenthesis are there to determine the phase angle of time between each separate voltage rise. The most that the 1-3 meter can record in our ordinary dimension of time having 360 degrees of time separation would be 13 + 43.3 = 56.3 volts, but it reads 23% over that value at 69.2 volts. So we cannot use the voltage meters to determine the total amount of time expansion involved, but rather then we must use the amperage stator amps/phase amps in delta delivery ratios to determine the amount of time expansion. At 8:37 both the left and right top stator amp meters show amperages slightly under the total amount of phase amperages existing on the arms of their load, accounting for 180 degrees of amperage difference in time on each ending delta triangle point. (If all the current from the phases returns on a stator line, the currents are 180 out of phase) The remaining stator line showing 1.18 A serving .49A and 1.45A shows a 42 degree phase angle by the law of cos.; which is used to determine any interior angle of a triangle once the outer lengths are given. 402 total degrees of time separation are proved in this video. Machines exhibiting a "localized" time space curvature are indeed possible. The 666 machine primary system used to power a wireless bipolar tesla coil literally converts time into energy, thus accounting for the phenomenal efficiency of its powering of loads. This is literally the discovery of a method to create and harness the manipulation of "curved" space-time to release energy by means of compression of magnetic fields in time, sourced from timings of resonance themselves separated in time, with the end result showing an expansion of time itself caused by those repelling magnetic fields.

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up Next


Sign in to add this to Watch Later

Add to