Loading...

How to build a Hidden Shelf Edge Clock - 3D Printable | Elegoo Arduino Nano | Smart Home | LED

250,243 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Premiered Mar 7, 2020

I'll show you how to build a very smart looking shelving system that includes a hidden giant clock in the edges of the shelves, and integrated LED downlighters to show off your favorite items on the shelves. 👇 More info below 👇

As the lighting is LED (using WS2821B 'Neopixels') you can choose your own colours. A discreet photoresistor also dims the LED's when the ambient light levels drop - great for evening ambiance in any room.

List of items used in this project and where to find them:

■ An Arduino Nano(x1): https://geni.us/ArduinoNanoV3
■ A 5m roll of WS2812B LEDS which has 60 LED’s a meter: https://geni.us/5mWS2812B60m
■ A Photosensitive resistor module: https://geni.us/PhotoresistorModule
■ A DS3231: https://geni.us/DS3231-RTC
■ Some Hook up wire - ideally three different colours: https://geni.us/22AWGWire
■ A couple of 470 Ohm resistors: https://geni.us/Ufa2s
■ A couple of electric terminal block strips - each 5 blocks long: https://geni.us/TerminalBlocks
■ No 8 wood screws: https://geni.us/No8Screw
■ A 5v power supply with screw terminals: https://geni.us/PowerSupplyTerm
■ Some thicker twin core cable
■ Some filament for the 3D printed parts: https://geni.us/PLAFilament
■ Wood infused PLA filament: https://geni.us/WoodPLA
■ Wall unit rail: https://geni.us/WallUnitRail

These are some of my favorite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: https://geni.us/Bosch-Screwdriver

==========

The code can be downloaded from here:
https://github.com/DIY-Machines/Digit...

https://diymachines.co.uk/

3D printed parts and wiring diagrams can be downloaded from here:
https://www.thingiverse.com/thing:420...

Drawing for CNC drilling of the backboard (if you have access to a CNC machine or know someone else who does):
https://lewisaburrow.selz.com/item/5e...

==========

SAY THANKS:

Provide continual and dependable support through Patreon:
Support us on Patreon: https://www.patreon.com/diymachines

Buy me a coffee to say thanks: https://ko-fi.com/diymachines

SUBSCRIBE:
https://www.youtube.com/channel/UC3jc...

INSTAGRAM: https://www.instagram.com/diy_machine...
FACEBOOK: https://www.facebook.com/diymachines/

==========
List of camera and lighting equipment I use:

Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip




Disclaimer:
This video is shared for demonstration purposes only.

Loading...

Advertisement
When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...