Loading...

Canon 7d firmware 2.0 audio recording tip - DSLR FILM NOOB

56,323 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Aug 16, 2012

http://www.dslrfilmnoob.com/2012/08/1... You might have invested in some cash in AGC disabling devices like the Juicedlink DS214. If so, you might want to keep it in your collection. Even though the new Canon 7d firmware 2.0 update eliminates the need for an AGC disabling device, many of them have very useful functions like built in gain and mixer controls.

The DS214 for example has independent controls for both the left and right channels. This combined with a Rode video mic or Sennhieser G2 wireless system gives you the ability to split the audio output into two different channels with two different audio levels. The nice thing about this feature is that you can feed the captured audio from the microphone into your camera at two different levels.

Since the Canon 7d doesn't give you any monitoring options, this configuration gives you some protection against audio peaking. Simply set one channel 8 to 10 db lower then the other and you have a built in buffer for audio peaking.

If you're interested in the Canon 7d, you can find it here:
http://www.amazon.com/gp/product/B002...

You can find the Juicedlink DS214 here:
http://www.amazon.com/gp/product/B004...

The Rode video Mic pro can be found here:
http://www.amazon.com/gp/product/B004...

And the adapter for the DS214 used in this video can be found here:
http://www.dslrfilmnoob.com/noob-store/

Equipment used in this video:
Canon t2i
Canon 35mm f1.4
Canon 135mm f2
Sennhieser G2 wireless microphone

Loading...

Advertisement
When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...