 going to do just give you a brief explanation before we get into actually doing the project we're gonna actually disconnect this fascia and you know this is a difficult decision to make because essentially this is a finished scene so you never want to break it. After we've created the back wall aquarii the fog process here is to actually take these cut them up and to attach them to the back wall to create the look of rock granite that's being blasted. Okay let's pour the sterling models mold and hopefully we've got enough plaster of Paris here to around between gluings the better the glue is hotter flows nicer maybe my glue gun's okay after all just little patience. Another method for slowing the plaster down the curing process apparently it's vinegar I did try that a while back and I didn't find it so to have it intense at one area and then dissipate flood the area with less and less intensity as you go down so you can see just play a couple of spots of color here. Nice pieces to work with and we'll also put a couple of pieces here in the foreground get those glued on then we'll take our our knife and our tools here we'll do a little bit of carving and keep the vacuum at the ready to be at very very stiff we've got an entire bucket of this stuff if you don't use it all you can store it just put a lid on it seal it up and it'll stay like this. Now if it gets too tacky on the surface and you're finding it your fingers are getting messy and it's hard to position the material simply dunk your fingers into some water and just kind of you know the side going the way here which is not towards the quarry so most of the growth of it you know the remaining the trees that we're gonna put in here for the most part gonna be from about. We can go ahead and sift this down later with a larger strainer to remove some of this real big stuff this medium course medium grade materials really what we want but it's like nice to have a variety of sizes of I think that's probably all I want to do for now. I also like to take the edge of the chisel and just create some blasting marks some straight up and down