 Okay, that was hard work, wasn't it? Get that out, get that out, a bit of repointing here. I couldn't even guess how long it is since I've seen an empty cavity without any insulation blowing in it. We're polishing the channel a bit by bit. Yeah, the turd's getting polished. Okay, thank you. Just sat on the edge. Just the width of it. It's misty, and... The other one, what? Nine o'clock. Nine o'clock, should have set off an hour ago really, but it was raining. We've been to Hodgson's, which you will have seen in the video over here, the Aluminium Tower up. And I've just been across the Fairwoods to pick up building sand. Another wrangler line for another job we're doing. A drill bit for doing a drilling out. Now we're on our way to Nubra. This is part of a two video we did a while ago and we did the stone pillar that we knocked down and moved over. And everyone gave us loads of stick for the crap flagging, which we did explain was temporary because we don't do flagging. The flagging was done as a custom, as a famous of the customer, just so they could use the drive instead of getting the flagger out and just for two flags. But anyway. Yeah, it's in that video. Go check that one out for this. Oh yeah, it's in. We'll leave a link to it in the description. It's called How the Hell. This is a pillar still stood up, I think, something like that. But anyway, we're off to Nubra to do the patching, taking all the scabby bricks out and then replacing them with as close as we can get. We'll have an accident before we get there. That's it. We'll see you when we get there. We'll go now. Right, we've arrived. We've had a brew since we were skating late, so we're gonna get cracking now. So we wander around, see what we're doing. I won't put that on YouTube. Is that a bit of a crack bubble? No. It's doing the job for now. That was hard work, wasn't it? We've got a load of those. Obviously, they're all younger than those, so. My unfortunate's still intact. Yeah. There's three there. So there's some, that's Jason's done these. Then we've got some up there. I hope this tower's high enough. I might have to go and get another big lift. Not much we can do with that. And then we've got access round here. Yes, we have got a gate. I thought there's more up there than that. So one, two, three, four, five. I could have done with a... I might put the ladder on the kitchen to stand on. And just get that cover, that one there. Yeah. Yeah, so that's the project. So we've got access here. This is good. And then, which we missed last time. Yeah, it's easy to find the rest. Yeah. Yeah. Look for this side. So we've got this one, this one, these two, and these two. And I'm going to try and cover some of it together with the ladder. Onto this conservatory because we've got one over there which we haven't seen, and one up there, which I don't really want to leave. So let's see how we get on. There we go. Spotboard on the polycarb to take the weight. Ladder onto the scaffold against next door's. The roader, gazebo, where they be for it. Anyway, nice and solid. Can walk up and down that now. And down. Get that out, get that out. Bit of repointing here. So let's get this camera shut up. Right, the awkward ones are done. What a bloody mess though. Look at that conservatory. We've covered as best we can. But it's just going to be a hose jump when we're done. Yeah, I've got that one out. That's the awkwardest one. And then when I got that out, the one below, the face is all blown. But it hadn't fell off. So took it out while I was there. So I've still got that one to come out. And then these ones. The roader grinding is done. And they're actually solid. So they come out pretty easy. Which is a blessing because we've got a lot to get out. So Alex is putting a mix on now. I'm going to get the rest of these out. And then we're going to put them back straight back in. Obviously we can't just do all the bricks and then do all the patching because we've got to meet the scaffold. So we need to finish round in this area. Move everything round. Start again over the other side on that chimney. Some quite high ones on that. So hopefully we've definitely got enough. I mean, we should do a much way on one list. We've got two lists. So it should be fine. Anyway, we'll go back to town. That's why I'm making all this mess again. A bit cramped on here. But keeping that tight, if that's from this defence panel, we've got to get the thing in. Anyway, enough of that. Here we go. All out. All cleaned. Ready to go back. Nine bricks. So hopefully this is the awkward side. It's going to be done. But here's a quick one. I can't remember. It must be. I couldn't even guess how long it is since I've seen the empty cavity without any installation blown in it. It's had about 50, 60 mil cavity. Clear cavity. So we'd have to worry about the installation blown everywhere, which is great. So, again, we'll drop back to town. That's why I put these ones in. And then we'll try and get a bit more film on the other side, which is a bit less awkward. I mean, that's going to work together over there. There we go. That trucks them getting up because the ladder side doesn't match the other side. So the ladders are supposed to go up one side. But we can't get it to work. So we'll have to put the ladders at the bottom and then the others at the top. I can just about reach the top of the chimney. We're going to take one of the angle ones down and then we've loaded the others. Alex is around the other side tidying up. And so we've got those to do. This is about quarter past one now, by the way. And then we've got a floor to come out there. So we've got a big push-on to get this done today. I don't think I'm going to get the scaffold back today. We'll take it back in the morning because we're waiting on scaffold now. Well, the scaffolders are coming Saturday. So they're going to take home to get it down and put the one up in Lydian on Saturday. So we won't be able to do it. Can't do it Saturday. Just going to have a look. Here's the trap door. There we go. That's this afternoon's project. A bit dusty. Here's Alex. Getting me gear for me. Did you set your ones in the crate? Yes, please. Crate, spot board, mortar. I've got the bricks. We've got bags in the van. Yeah. It's because the crate's full of crabs so I'll throw them out. OK. There's nothing in the mortar for a bit now. Right. So, unfortunately, the next door's got the washing hell out there. We've got that covered in dust. There we go. We've got our angle piece to cut there and then all these to go back in. Bit of a stake, really. I'm sure they couldn't be three feet off the ground. You've got to be up here on this wobbly scaffold. Don't mind sights covered with this stuff crap. I don't like it at all. So, get ourselves loads out. Get these last three cuts out for when I cut them. Alex is going to cut right through the drill. Try and get us pushed on a bit by the time. Yeah. Switch off for now. Right. 10 past five. Alex has just done a bit of clearing up. I've put the last three in there. And changing them. Those are a bit from the road to the top. Moving up to put one of the very top ones on the angle in as well. So, that's it doing. I thought you were going to show my stuff. Oh, yeah. Alex's got that bottle of money. You're a good one. And there's the one from this morning. Bit of extra pointing. And then, three extras under the window. And the gutter. And the gutter. What? Oh, you've got to take the gutter off you. Not the gutter. Oh, yes, the gully. Sorry. I forgot Alex's gully. Yeah, that's the one we forgot last time. Me and Ness, do you have that? Hopefully. Should put a logo in it. So, I need to make sure you show my stuff off. Yeah. Showing it. I'm not going to do nothing today. No. It's been a long day there, hasn't it? You've got 40 bricks. We've got those bricks in for ten. And then you started them at like one. Yeah. The scaffolding didn't help, did it? No. It wasn't from that. That was a big flash. Yeah. So, anyway, that's what we're doing. Don't forget to like and subscribe. Hit the bell. Yeah, hit the bell. And we'll get a nice subscribe thing for the screen eventually. One day. Yeah, when I get around to it. We're polishing the channel a bit by bit. Yeah. The turd getting polished. See you next time.