 Are you tired to bring your bikey laptop charger and your smartphone charger in your backpack every time you travel? Me too. So we in ST develop a new solution to make your life easier. Here it is. It looks like a smartphone charger, but it can actually charge both a laptop or a smartphone. It weights only 66 grams and from the USB type C port it can deliver 65 watts. So almost one watt per gram. If you choose to charge your smartphone it will take only 45 minutes from zero to full charge, 3.5 times faster than before. And this is the only battery charger you need when you travel. So how we achieve that? We achieve that thanks to two of the most exciting new products from ST. ST1 and MasterGun. ST1 is a brand new digital controller specifically designed for this application. It's a very integrated system. In the same package we put an active clamp flyback with single certification and a 32 bit Cortex-M0 core. And also a USB PD 3.1 interface. MasterGun is our award-winning gallium nitride half bridge power stage integrated two GAN transistors and gate drivers. ST1 and MasterGun allow the charger to use smaller magnetic components while the peak efficiency is above 94%. As we did on our reference design that you can see here. This board is available for anybody who wants to prototype their design. This is not only about convenience but also about environmental sustainability. Our charger use 4 times less plastic than this one and they are 2% more efficient than ever chargers. It means that if our products were used in all the chargers we could save 100mg of raw materials and energy from several nuclear plants. So if you want to know more about these products please contact our sales representative or visit our dedicated product webpage on ST.com. Thanks and thank you soon.