 Well, we say we're live. We're live? Yeah. We're live. I'm trying to find it so I can't read the comments. Right. So, I went ahead and pulled the trigger on a new compressor. I have this little guy. He's probably about two years now. I don't know if I can bring it over. It's still attached. But it's a good little compressor. It's just, right now, it's a little, it kind of acts like it doesn't want to start or start pumping or... It putters. It putters a little bit. So, I figured it's just, it's time. I mean, it's oil-less and it's just one little, I guess it would be cylinder? We got that from like a Weefurge shop a year ago. It's a Puma. It got about 40, 45 minutes out of Dallas. Old gentleman told me he has one left, 100 bucks. And I went down and got it. And it's worked like a gym ever since. It's light. It's very quiet. But it just, as much as I use it, as much as I airbrush, it just, it was always, always on. What it happens is, if you don't know anything about compressors, these come on when the tank is empty. And then it fills it up and it shuts it off. And this tank is so small that you're constantly airbrushing. It's constantly trying to catch up. And so, I went ahead and got a new one. So, we're going to unbox it and see what we got here. This is a California Air Tools, aluminum tank. We got it from Amazon. But apparently, you can get them from Home Depot. I don't know. People keep, people are saying that they don't hit that side button. I didn't. I just turned it on. The top it'll, um, that they get it from Home Depot or somewhere else cheaper or something. This was 200 bucks. It was like 214. It's silent. And it's aluminum tank. So, it's about 20 pounds lighter than a normal compressor this size. Don't cut yourself. Safety first. Safety first, everyone. Well, it says safety first. Who does safety first? It's a baby man. Oh, hey y'all, hey y'all, hey y'all. Well, you want to play in the box? No. Well, let's see here. So, if he says, oh, hell, just stab it and rip it open. Altar quiet. No way. Still free. Piston pump. Okay. That little thing was a piston. Not up. Did I say piston? I don't remember. Um, it's got a eight gallon tank. Which is awesome. Aluminum. Only 8.5 amps. Thermo overload protector. Woohoo. What does that mean? So probably if it gets too hot. It'll just shut off. It'll shut off. Or maybe you can, I don't know, it's a button on the side of the tank. Hmm, buttons. For those just joining in, this is Jeff's new air compressor. His last one is dying, puttering out. I have one that's probably this size, but it's super loud. And I use it for outside stuff like Meryl's bigger stuff. I've been wanting one. It's a little bit bigger. This is not a paid advertisement. Yeah, no. It's not sponsored in any way. We paid full price for this. The company has no idea who we are. Well, maybe one day they will know. One day they'll know. Wheels. That's awesome. Those wheels. Who's just getting a little bit too excited over there. Oh, thank you. I wanted airbrushes and I did a screenshot. And all I did was I put yes or no airbrush artwork and put the picture out there. And I got so many comments. And every single comment on this was it's amazing. I've had mine for eight years, four years. It's ultra quiet. So it's perfect. And I was like, all right, well, after the 50th comment, I was like, I might as well pull the trigger and get it. Let's get it out of here. Hey y'all, Rusty says she has this brand compressor and it is quiet for a large compressor and that they use it for everything. That's massive. That's about the same size as the one in the product. The yellow one? No, there's a handle on it. And this is the thing that I don't understand when I was looking at it. Why they put this handle like this. I'm going to see if I can roll it. But when you're rolling this thing, you'll hit it. You'll kick it. So what I want to try is if anybody out there, maybe at Makers, somebody has one of these pipe vendors where you can bend it this way so that you can have it out here. A little easier to pick up and move. Who knows. And you can see the size compared to Bowie. He's about 25 inches high. This is like 24, something like that. I think maybe three inches wide. We are out of room. So we got the tank itself is about 23. It stands. Bamp nose. 20 inches. 23 by 20 by 9 and a half. Maybe 9. So that's awesome. Hey y'all. Really like, I watched a video of the guy that makes him. He had one compressor sitting next to it. And then he had his, this one. And actually this is the one that aluminum tank. He turned that one on and it was super loud. I mean, I've had a compressor that loud. And he turned this one on and it was a hell of a lot quieter. So let's see if we're going to have to put this in the closet and run a hose. We had to do that last time. We had to move everything because we live in loft apartments. I don't mind doing that. But the closet is about 30 feet away. Y'all are seeing something very rare. Moose kind of playing with Bowie right now. What is the PSI on it, Jeff? So right now it's filling up initially. That's a little louder than I thought it would be. It's still not as loud as the other one. Well, the other one is way louder. Like, we couldn't have talked over. We can't talk over the other one. Yeah, I think you have to set it. JJ said if you're interested in hardlining it with multiple outlets and need some help, let me know. So this is our filming area. Push your trap. But he's like, I'm just going to hang out here and make sure everything's okay. It fills up to eight gallons. Eight gallons, eight gallon tank. And this is another thing. These little guys, I'm pretty sure they're just war. Because I could hear air leak. Nearly not from here. But this was always on. Whenever I wasn't even using it, it would come on. So that means there was a leak in it. Here, I'll show you guys what this one sounds like when you turn it on. Obviously it's a lot smaller. One little piston, but that's pretty amazing. You can hear it. I think this is releasing. Oh, that is? No, it's on. Yeah. See, I have like... Oh, that's what it is. And see, that's another thing too. It's so light that I have to hold this little valve. This is what the moisture gets trapped in. Ew. And then you have to just wait. But I do love this little guy. Because it's so quiet. This is quiet to me. That's a little louder than normal. But it's still pretty quiet for the size of it. For two pistons. This one won't be on hardly ever. Because... It just fills up. It fills up. I mean, that's eight gallons. This is like one, I think. Maybe a half. So this one, when he airbrushes, comes on like maybe every ten minutes. This is 60 PSI. I want to say this is 90. Voltage, amp-hertz, phase, three-wire tank, gallon. Does not say. Right there. But it's in that... That's a fun little slot machine lever. This little guy off. Sheila says she loves when we get new toys. It's very exciting. Hey, stop growling. What are you thinking? What do you think of all that, huh? Not a fan of that part. Now, I need to... I guess I can just take this off. Why wouldn't it go in that hole? Which one? Because there's not a... This is what it would probably... Oh, because you have that splitter. And I could take this off, but maybe... No, you know why? Because I have this extra line on here for distance. So I can put this... I can plug this in. Put my compressor in an area where it's not in the way and then have it long enough. Because normally this would go right here. Hey, Sue. So, yeah. So what I'll probably do... I guess I could just take this off. Plug this into there. Yeah. Low battery. Yeah, I've been recording. But, yeah. So, I love it. Are you going to plug it in and do a demo? That too. I've got to figure out how I can go the right way. One time I put this on and it was like not catching moisture. What I'll probably do is... Sorry, yeah. Because this is perfect for over there. I was like, she just walked away. I just attached this to this and it would be fine. So, yeah. I don't mind it. It's not that loud so it's not going to be on all the time. Claire's got jokes. She's dropping in bombs. Therefore... I see enough I'm plugging your phone in. I think that's good. There's nothing else I can do. It goes to 120 PSI when you turn this all the way up. I do not need that much PSI. Busy for airbrush. What's optimal for airbrushing? The best that I normally go with is about 20. I want to say 20. And that's with the gravity feed. It really depends on the size of the piece and if I want to get a lot. If I'm using Siphon Fit, maybe 24, 25. I don't look at it. This is what I use so I just do this on sound. I've done this for so long you kind of know how you spray it in your hand if it's a lot or if it's too much or not too much. Awesome. All right. I think I'm going to make all this stuff fit. Put this to use. I do have a piece that I'm going to be working on so I'll let you guys know if I do that live or not. Everyone's asking to see you use it. I'm not ready to use an airbrush yet. All over the loudness, I would give it a... How many bananas? Probably six bananas. Five maybe for a compressor this size. Out of ten? When it says it's quiet, ultra quiet, that is not ultra quiet to me. But for a compressor this size, I would say a six or a seven. I would give that little compressor probably a nine or a ten. Being as quiet as it was. So you're just basing it off of quietness. I'm glad I did get this aluminum. Does what it's made out of change the quietness of it or the weight? What's the point of it being aluminum? The weight and the rest. This fills up with water so you have to empty it every now and again. This little guy emptied the water and it will not rust. The other ones will rust. I've had one rust on me to the point where the seal was a little bit messed up. This was when I was doing t-shirts because it was on all the time. How long is it supposed to last you? Everybody on that post said they've had theirs for at least four to eight years and it's amazing. This is an oil-less compressor. When you get an oily compressor, what does that mean? What do you have to do with oil? Add oil to it. In it like a car or you just have to lube it? No, it uses oil and those last forever from how they make stuff like that. I feel it a little bit heat right now for it being on like that. But wait, that's not for you. You can have a normal conversation and not yell over it. That means it's a good compressor. It was good because you could hear us talking. That's not yours. That's not yours. But it is. Ready to take off. I would give it just by that said that you can have a conversation and you're not yelling. Very many TWSSSs. I would say a seven and a half. Close to eight now. I didn't think about that we were just talking and you guys could actually hear us while we're recording. That's another thing that I wanted to get one that doesn't come on so often because you won't hear it while I'm recording. You hear it every now and again. And by using less pressure, the less it comes on. I was using this to run a small nail gun which you can apparently. You can use these small nail guns, stapler, maybe a small paint gun, just paint small stuff. But the more pressure you use, the more air is going to come out. This is going to come on more. Makes sense. Thank you Tara. I got it done by the awesome crews here in Dallas, Texas. If you ever want to get your hair done, hit up crews at, hold on, 15-14? Studio 15-14. Does it have a timer? He's in Costa Rica. No, but what it does is it fills up at a certain point and then it kicks off. Then when it gets down to a certain down here, it turns on and then it goes back up and then it shuts off. Congrats Jeff, new toys are always fun. Yeah. Are you going to try it out tonight though? Not on the live, but like... I'm sure. I mean, it's just air. I'm going to show you guys what Jeff's working on. His newest painting. It's a little... Some people might find it like, that's a little scary, but just because... It's a lady. She does not have a black eye. He was just playing with graphite, charcoal. She's got a dagger or a sword with rosary. This is the original that he's going to base it off of. Are you going to put the... Nope. He thought about adding horns to her, but... Thank you for turning in for a second Gypsy J. Gypsy J. Hey Liz. Man, already in love. I knew people would like it. Where's the... Tray and the new coasters? I want to show them. It's right in front of you. I didn't see it. I couldn't see it. You guys missed it. This is my new... My newest, latest project. Look how fun. Next time I do one, I'm going to put something on top of it so it gives it that texture of the ocean kind of like it does on the bottom. Pull handles for picking up it are coral, actual coral. The colors I used were Bondi and light blue transparent and the lighter color is turquoise by just resin. I got to show you the coasters Jeff and Belish that he's going to be posting a video of soon. Never mind our messy home. Also, I may be a boxer's hoarder but that's fine. Bye Sue. Gypsy J, you're coming to the summit. Super pumps. So, we added some gold leaf to the back of these coasters that I did a while back so you can see some depth in them. The camera doesn't want to focus so that's cool. This one he tried to make red with a PBO, Pebio, Pebeo leafing but it was on... Couldn't be done. But I think they're super fun. Check this one out. What? Where's that one you did with the swirlies? I love these. Anyways, I think this is super cool. Now I want him to do a large painting on a clear with this effect. The gold leafing on the back so that it showed this through the front and gave that depth. I super love it. Alright, Bea, what you doing? I'm gonna work because I need to... I'm gonna need... I feel like you're just in my face and in my crotchinal area now. I don't know if I can... I'm gonna have to just put... He's in deep thought. Look at him on the floor with his new toy. He looks like Christmas morning. He looks like a kid on Christmas. He am. Alright, you guys. Obviously, Jeff is having so much fun my husband was like that. I'm being summons to take this little guy... a cup of tea. Deris says I wouldn't even put a drink on that coaster. Anyways, this little smiley face is trying to tell me that it's time. Is it time? Is it time? Do you... Do you... I know. Is it time to go outside? He's like, It's time. He's like, what's happening? I don't speak English yet. Okay, okay. Alright, you guys. You know all the things. We love you all so, so much. Thanks for tuning in and seeing what we're up to right now. And, as soon as he starts actually airbrushing with this, I will sneak in a live feed. It really is an opportunity. It's 100%. I know it, Miss. Thank you, Claire, for the links. Check out everything down in the description box below this video. Okay. I know it. What else? Be kind to one another. And we will see you guys next time. Bye.