 This is what I'm working in And I'm welding down in here so this is what I'm doing See this bent See how it goes like that That's where the ram goes it starts there. It's on up here That's not supposed to be bent like that That's broke out down there, and it's bent backwards See that? So I got to cut that piece out And run some new pieces across here. I'll show you when I get to that point. I'm gonna finish cutting this out Okay guys This is what we got now So what we had before or what they had in there from the manufacturer Was just some square two 3 sixteenths, I think it is thickness and that was it what we have done here Is put two by six Square tubing was not squares more like a rectangle in there, and that's quarter inch thick It's all the way down to where the rim That's quarter inch and all that quarter inch And I also added this piece in which is four inch channel Decide what you didn't have anything at all before it just came from up here Down to there There's what we're looking at. Here's another angle of it guys. Like I said before, I don't know if you've seen the first I Mean a couple seconds of this video But this wasn't in here four inch channel Like I said, that's quarter inch two by six That's all four minutes And there's a lot of wells there that have to be broken order for them to have that problem again It's anything right up there That's where the RAM looks into They'll push that out through before they can bend this again. Now this is not perfectly straight across there Just being here But it is straight enough. It is a lot sturdier than it was You're just not going to get that perfectly straight without You know having a quarter tire ram to go from here to there to Really push that out and then it may kink on you and I didn't want that happening. So as you can see, it's very straight The RAM mount down at the bottom it's straight up and down now. So shouldn't be much of a problem. So anyway guys Just here at the shop on Friday here by myself today So let me get you turn around here. So I just thought Trying to figure out how to turn a damn camera around Anyway guys, I don't know if you can see me or not But I just thought I'd share that with you some of the stuff I do at work I'll make some more videos when I get a chance to come slow like I was today So that being said remember she bears met the man legend. I'm gone for now guys. Have a great weekend. Bye