 Here you guys is Kevin. I just want to show you how to attach what you call this clear belt, timing belt, CR scale for the wet format printer. Similar to the desktop models, it's the same thing you attach the spring on the right and then you just pull on the right to attach that hook. The only difference is the dust spring. Let me give you a clear shot of this so you can see how it's constructed. Also, we have a forklift party so if you hear beeping background, sorry about that. To remove the spring, you put your hand in the back and lift the back end and the thing falls out and then you can lift up the whole spring. To install just the opposite, so you put the spring in place first. Then slide the back into place. Check the tension and attach the reset. And finally take a look of the back, make sure the encoder strip goes through that reader. Now the outside, now twisted. I know it's hard if you do not take the cover off and have to work through that little tiny window. And maybe subscribe to my channel so later on I can tell you how to take the cover off. Okay, I hope you enjoyed this video. Visit us at www.bchtechnologies.com or locally at Greensboro, North Carolina. Cheers.