 Hey guys, Drew with GeoArm and I'm back to talk to you about the 2GIG Edge keypad. It's learning into the Wi-Fi network and it's learning into the panel, the 2GIG Edge itself. So what we're going to do first here is I'm going to go ahead and refer you to my previous video which is the video for learning the 2GIG Edge panel itself into the Wi-Fi network. Once that's been done then you would come back to this video and you'd be able to accomplish this task. So like I said, first you want to get the 2GIG Edge itself learned in and then you want to go ahead and do this keypad. So first thing we're going to do here is we're going to get it learned into the Wi-Fi network. You're going to hit the next button in the bottom right hand corner. And on this screen, by the way, it says to securely pair this panel with your security system, it first must be connected to the same Wi-Fi network. So it's explaining to you that you need to do it the other way first. So once you've done that, then come back, hit next, and it's going to scan for your wireless networks. So you're going to scroll through just like on a tablet, find yours, or click on it or highlight it, and then you're going to get into a keypad. You're going to need to enter your Wi-Fi password. It is case sensitive so make sure that you hit it correctly here or it will ask you to do it again or it won't pair properly. Alright, and once you've done that, then go ahead and hit the next button. It will start learning into your Wi-Fi network. Once it's gained access to your Wi-Fi network, it will start scanning for the main panel itself. So what we're going to be doing on this panel is I have my edge system here, and we'll go ahead and get into the programming menu by pressing the gear icon in the bottom right and entering our installer code, which minus factory of 1561. At that point, you're going to scroll down and go into installer toolbox. And then you're going to go into panel programming. You'll see a keypads option. You're going to go ahead and press on that. At that point, you go into whatever keypad is available. So in this case, it's going to be keypad one. You're going to click device ID. It will say pair. So at that point, this thing is almost ready to go. So there's going to be a section at the top after you've gotten device ID learned in there that's going to ask you keypad use. You want to make sure that you enable that. So that way this keypad will be enabled and ready to go. So after you've done that, you hit the down arrow so that it confirms it. And then you can go ahead and hit the back arrow a couple of times and get out of programming. At this point, as you can see, our keypad is now enabled, and we can freely arm the system and disarm from here. So we'll go ahead and give it a test, hit arm stay. It started arming. So we're going to hit disarm now and then into your code. Mine is the factory code of 1111. So this is how you get the two gig edge keypad learned into both Wi-Fi and the two gig edge panel itself. Make sure to subscribe to our YouTube page and click the show more tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos, and our low-cost, no-contract alarm monitoring services.