Loading...

SlidingDoor2.mov

602 views

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Apr 16, 2012

Installation of a sliding glass door. See installation check list below:
1. IS DOOR PLUMB, LEVEL AND SQUARE? (MOST CRITICAL)

2. MEASURE THE PERIMETER FRAME DIAGONALLY (INTERIOR & EXTERIOR) -- THESE MEASUREMENTS SHOULD BE IDENTICAL.

3. MEASURE THE PERIMETER FRAME HORIZONTALLY AT TOP, MIDDLE, AND BOTTOM AT INTERIOR AND EXTERIOR -- THESE MEASUREMENTS SHOULD BE IDENTICAL

4. IF PANEL DOES NOT FIT, USE LEVEL TO VERIFY THE PERIMETER FRAME IS NOT BOWED AT HEAD & JAMBS AND NOT CROWNED OR DIPPING AT SILL

5. USE A SQUARE & LEVEL TO VERIFY PERIMETER FRAME IS NOT TWISTED

6. IS DOOR PROPERLY SHIMMED AT HEAD & JAMBS? IF NECESSARY FASTEN AT JAMBS IN ADDITION TO ATTACHMENT THROUGH NAILING FLANGE.

O HAS ALL CONSTRUCTION DEBRIS BEEN THOROUGHLY REMOVED FROM THE DOOR; ESPECIALLY AT TRACK
O SPRAY SILICONE TYPE LUBRICANT ON TRACK AFTER CLEANING OUT DEBRIS

7. IF LOCK IS NOT ENGAGING, ADJUST WHEELS AT SILL.

8. IF TROUBLE LOCKING THUMBTURN, ADJUST FRAME STRIKE BY LOOSENING SCREWS TO MOVE STRIKE UP OR DOWN.

9. IF THUMBTURN DOES NOT OPERATE CORRECTLY, CHECK FRAME FOR TWISTING AT JAMBS.

10. HEAD CLOSER STRIP SHOULD BE INSTALLED PRIOR TO ITEM 3 ON PANEL INSTALLATION.

11. IS SCREW INSERTED TIGHT THROUGH THE FIXED INTERLOCK STILE AND INTO THE SILL BLOCK?

12. HAS THE #8 X 3/4" PAN HD TEK SECURITY SCREW BEEN INSTALLED INTO THE PREDRILLED HOLE IN THE MOHAIR CHANNEL NEAR THE BOTTOM OF FIXED PANEL?

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...