Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Feb 6, 2017
You have invested a lot in your FUJI Mats. Here are our recommendations to keep your FUJI Mats looking great.
STEP 1: Prior to mopping, use only a suction vacuum to remove dust, debris, hair, etc. A dust mop or blower only moves the dust and dirt around. You need to vacuum it up!
STEP 2: Mop your floor with a damp FUJI Microfiber Mop, or the most efficient way to clean is to lightly spray with a pump sprayer and then go over the mats with the mop. You don’t need much water/cleaner mixture, just enough to wet the surface to disinfect.
STEP 3: Use a small amount of the FUJI Mats cleaning solution in warm water and after mopping, let the mats air dry.
Always test your cleaning solution first on a small, inconspicuous area. Using too much cleaning solution will leave behind a residue and build up over time.
Avoid cleaners that leave a film on your mats (like Pine Sol).
Avoid high corrosives; only use a mixture of bleach at a 1oz / gallon ratio on a very limited basis (if needed).