 Hello boys and girls decided to start a new series And as you can see in the title, it's a WTF series been working on this 2014 Dodge Ram. This is the six cylinder 1500 long horn diesel 3.0 Doing a bunch of stuff rear brakes front brakes control arms in the front lower upper and Rear shocks and that's where the WTF comes in. I've done the other side It's very similar. Well Obviously, but the other side does not have the fuel tank and the fuel neck right here. There is so there's a a bit more room over here and A lot of room. Well when I say a lot more than this here, there's Half an inch of room. You cannot fit anything in here So And the problem is this top bolt right here. There's a nut on the other side and the nut is Well too bad. I can't show you and you probably won't be able to see what's on the other side Anyways, I'm gonna kind of try to draw it out for you. The problem is getting hold of the nut. That's in the back It's actually if you look at it from let's say you're looking at it from this side the bolt comes out and There is part of the frame or the bracket this Continues back there It's it goes up actually so the nut is right here. So how do you put a socket on it? You know, it's gonna be it's angled. It's gonna, you know, the only way you can put a socket on it It's like this and that's what I've done on the other side using this. It's a 21 12 points Six point will probably not work. I'm only talking about the right side right now and on an extension with a ratchet I was able to grab a hold of it and it actually grabbed it like this and that's how it came out. Luckily Here we go. Luckily for me It came out Like that and Because it came I well, I can't put it on any further because The part of the bracket is over right over here, but it came out and you know, it's fine I thought I was thinking of making a starting that Making the video right then, but I thought it wasn't that bad once I figure it out. It's okay No, but now this side I can't do the same way because of the fuel tank This doesn't really, you know, it's just a little bit less room, but this is these lines are okay It's the tank. That's in the way. So what the hell do I do? I cannot fit a regular 21 wrench because there's just not enough room you can see You know, no way that's gonna work try this this funny ratchet with this kind of extension That swivels a little bit So I thought okay. I'm gonna just go in like this You know towards the back to front and then angle this socket so it would be Like that They don't work try it for maybe 10 minutes all I'm doing and then using a gun on the bolt All I was doing is Slowly stripping the socket and the nut just wasn't on all the way or not even close to so for the socket to grab it So what do you do at this point? So then I thought okay? I gotta put a wrench on it with the open ends so I'm gonna have to cut a One of my 21 wrenches right cut it right about here somewhere and just put it on top and Try to grab a hold of it like that Then I thought If I come to this problem ever again, let's do a Universal tool So I cut an adjustable wrench Like this one goes up to a little over 21 and I'm gonna try taking it off right now. All right I'm gonna make this tight Just need to put it to get on and stay there Let's try this again. You saw that Compressor kicked in Anyway, this is what came out. It is a bit stripped Nothing serious. It's going back on to put it back on without even Holding the nut. All I'm gonna do is I'm gonna clean the threads on this bolt and lubricate it a little bit So it's nice and slippy And all I'm gonna do is just hold it hold the nut with my finger fingers and It should go on and now I have a new special tool and this isn't 1920 dodge WTF solution Captive nut. That's it. Well, this on the other side. So whenever I come across Something stupid like this. I am from now on. I am gonna be doing a WTF video every time I come across something Ridiculously stupid and easy to fix like this. All right guys, that is it. Thanks for watching. See ya You