 and another one. What's up people? Menrad here coming to you with an unboxing video. This time we're going to be looking at a solar lighting solution that has multiple functionalities and it can come in handy for providing security and sufficient light source at a location that you might not have convention power. Let's get started with the unboxing experience. You have a light array with multiple LEDs in the front, some on the side also either side and a solar array on the top. You also have a diode in the front for motion detection and to turn on the lights if and when necessary from dusk dawn operation. In addition to that you do have a instruction manual and keep in mind that this has 126 solar power lights which can definitely brighten up the place. To maximize water resistance the manufacturer has provided a small pin that can be used in the three holes to turn on and off the light. This is the assembly process instruction. Screws are not provided so please make sure to use the right diameter screws and the detection distance at 25 degrees Celsius is up to 12 meters so pretty far wide and it is IPV 65 waterproof certified and has one year limited warranty. It has very basic operation. Go to the back and there are numbers on the back 1, 2 and 3. Push number 1 and the light will blink to let you know that it is turning on. Option number 2 is right here it'll turn on and in this instance it's going to have a dim operation and it's only going to be at its full capacity or full brightness once it detects motion and option number 3 is it's only going to turn on once there is motion otherwise it's going to remain off. I personally prefer to use the first one that way it is completely bright and it is completely lit. Thank you so much for watching and I will see you guys and girls on the next video. Take care people. Bye