 Yeah, it's just like that bing bing boom. So y'all it's Tuesday. It's two o'clock I must forgot what time it was and today I'm trying to Figure out Hi big boy The colors I'm gonna use for a seven foot geode and so I've done this color test a couple times before right now, but I need to do another one so Because I need to do another one you guys you'd come along for the ride what are you trying to tell them that? Hello, thank you. That's enough. Look at this. That's enough. That's enough Trying to tell them hello. No cool so Let me find you guys on The YouTubes so I can see what? Y'all might be saying and Hey, Clara. I'm glad you have internet, but we said hi. Don't you below? Yeah, I know it when I get down Okay, make sure on me resin on my hands. Okay There you go. Sorry about all the moving around Also, let me show you Sorry close this Also that Let me get you guys popped out cool cool cool You doing this on your phone me too? so just to give you guys a reminder of what the Reference or Inspiration is that the client gave me it is this beautiful colorberry Peace sounds good Kim So Amanda have you been it has been a hot minute glad you're back So I'm gonna actually also do another kind of test in that I'm going to Oops, I'm going to something hold on I got to get all my all of my my whole life in order. Okay So I'm just lining up my references Okay, boys Everything's fine. It is a ferret and everyone's trying to get it Who just having a problem over there someone walk past his ferret. It's a whole situation It's an issue So I went ahead and pre-mixed my art coat. That's what this is. It's from stone coat countertops you can find it on my website artists to let calm and As well as everything else that I'm using today, I'm also going to Try to put some high build for Some separation lines. I Haven't used high build in conjunction with other resins before So we'll see how it goes I'm high build is I'm reading this verbatim verbatim verbatim Anyways words are hard Kujo lay down I'm reading this straight off the label High build is the thickest most gloopy and controllable resin on the market create 3d height texture and perfect placement for your resin art So it's got a super thick or high viscosity no slumping sliding no movement. It stays where you drop it Like it's hot drop it like it's hot. No only me. It's fine High build must be pigmented use as suitable resin pigments a Successful nope successive layers after 20 minutes It's a one-to-one Is UV stabilized Don't eat it or drink it or wear it. It says suitable for use as food safe coating, but not as a cutting board Have to check that out Also, there's upside down fish on the label. I don't know what that one means So it's got a lot of stuff on here but it doesn't have like instructions as Like what the working time is other than you can stack it after 20 minutes or how long you need to mix it together It may be in the little box that this comes with because it's a full kit of color and High build But I I don't know where that box is and I ain't got time for that. So we're just You know, but I know what you be saying. So we're just gonna figure it out together Goopy is a great Adjective for what this stuff is So this is the part B since it's thinner at least in my head. That's what that is Not gonna mix too much high bill Name and sure Okay, so I'm probably mixing about four ounces and this stuff is hard to measure because It's very thick. So when you pour it out, it's gonna be kind of in a high little puddle I need stir sticks Y'all are buying them faster than I can make them right now, which I completely appreciate If you haven't gotten your trial sticks Get some Time for that so It is quite goopy. I do have some high build kits on my website artists told at comm and This product is from Eli Ken. So it's a UK based Epoxy So people that do the like blob Artwork and like you build up things Hopefully it will we'll get you back As like on a regular basis. What's up Lynn? Thank you for the reminder to the like button Heard anything from the high little person. Yeah Evelyn. She reached out to me Tonya the US rep reached out to me not too long ago to see about carrying more you like him products, but She didn't have any high build like just the high build resin That's not in a kit with colors and all the other stuff yet. So I was like, well, let me know when you have product in the States Just waiting on that But I do still have like five of this high build kits left on my website If you guys want to go hunt for it It's an if you search Eli Kim or resin, it'll pop up the blobs look cool. I agree Denise I just am I the only one? Okay, hear me out if I Don't finish a piece like the same day or the next day. I Tend to not really lose interest but get distracted by other things that I have to do So if I don't get it done the first day or the next day It just kind of doesn't get done and I feel like if I was building blobs Which take layers It I would just never finish it Much respect for all of the blobbers out there. Is that what they call it? Probably not Anyways, I don't know what the working time is or the mixing time on this product. So I'm trying to just err on the side of caution Huh, how thick this stuff is super goopy What's up, Libby? How you doing? So We're trying to build our subscriber base. So if you haven't subscribed yet, what are you waiting on? Subscribe leave me your thumbs Tell me what you think, etc I'm gonna go ahead and pre-mix the color Into the high build and go ahead and draw the lines on that will separate my bigger puddles of color Mainly because I want to get this out of the big buckets as fast as possible because I'm not really sure What the working time is and if it's only 20 minutes? Because that's when you can add another layer then I really need to Get on the ball with us, you know Nami So I'm separating this into The different cups that I'm going to use to mix my thin line colors This stuff is goopy Made it not lie. Oops That'll be okay. All right goopy check move this out of the way and Color I'm gonna do For sure a white. Hi Danielle. Welcome to live Glad you're here. I finally got more titanium and stock y'all You've been waiting on it. Get it while getting's good. What's up, Lori? Miss Spackle Ginger. Yeah, I saw that you sent me a text. I just haven't gotten to it yet. I I did just ship you a package yesterday, but I Thought you still needed that package so I'll go in and find out what's going on I didn't want to answer you till I had an answer And so I'm working on answering With an answer. That's too many answers Hello, Alan. How are you? So let's mix this white in and see if it accepts this paste very well the instructions on the high build says Use proper pigment. And so I'm gonna assume Dispill you I'll text you after we get out of the live and we'll figure it out So it looks good. It looks opaque Sorry, I just bumped you very goopy Next one I'm gonna do is Can't nope Okay, one more shot gains Next one is dark turquoise Color obsession. It's gonna leave that open because that was not fun Okay, it is Who just going off? silly boys So this is dark turquoise still goofy very opaque And then the last one I'm actually gonna Mose that's enough I'm gonna split which is kind of hard to do Because it doesn't core Eden. Um, I don't know but everything's downstairs Unless do you see anything tutor may have filled yesterday. I don't think you filled anything. I think it's all downstairs Okay, so this is 008 It is a floating gold and I always overload my powders Judy gets onto me every time and then I'm gonna use aluminum as well What's that Phoenix flow art? How are you? This other one is aluminum from just resin. I haven't used the powder in a while. So I'm gonna see how it does Okay This is one reason why I'm not the hugest fan of powders because it Huffs out like that Unless you think ahead and put the powder in first and then add the Resin on top of it Who has time to think ahead? pretty good client wanted a mix of silver and Gold So that's what we're doing Well, we're so glad you're here Phoenix as well as everyone else If you guys have any questions about this piece or any other Art thing Feel free to ask us what we're here for it's why we go live every day so that we can help answer questions Cool. Now we got our high build colors mix. I'm not gonna mix my Other colors just yet, but I am going to pour them out Maybe I will go ahead make some no I'm not I'm just gonna get them out of this big bucket So it doesn't set off too soon How many colors do I have? Blue Moon Dorn Shimmer dark turquoise and white Now probably need some clear as well. So we're gonna leave that So I have my regular resin and the clear cups and the high build and the white cups so that I don't forget what's what and Have a situation Okay Okay So I'm gonna go ahead and pour out Not doing that. I'm gonna get new gloves and I'm gonna do the glass first the reason why I do glass first is so that I can design the shape of my geode which I typically base off of the shape that I create with the glass and I can Change my mind and erase everything if I don't like it Without having to be upset that it has resin on it because if you do your design first You're gonna have resin everywhere. So your glass is gonna get sticky And anybody got time for that so Glass This is chunky fire glass. I have it available on our website artists call back calm If you ever forget what our website is you can find it down in the description box or on my gloves You have one All right, so I'm going to Kind of make this an offset Just slightly offset there I'm good with that and then I'm gonna use these quartz stones for Another line of texture Yeah, they I'm still sick Unfortunately But I think she'll be better soon Taking our little time to recoup from the move I'm pulling out all of the stones that have a dark hue to them I think I'm pretty sure these are tumbled stones Some of them look a little bit dingy Okay, I don't want too thick of a line I mean, I've been practicing my this bless you So I want this to essentially kind of follow The shape of my this so I need a taller area in the middle Jeff's working on a commission on the Over there So if you hear any funky sounds Probably him working on the commission This is probably one of the more difficult parts for me to do because I want it to be an Interesting shape without it. I don't even know how to explain what my thought process for this I want it to be visually interesting and not look like a rainbow or like just Rounded I Don't like them to look rounded I guess I like these areas to have a little bit of a peek to them But then they go off and look rounded Rude Yeah, I'm starting to look a little bit like a pop print So I'm gonna flatten that back out. See this is all stuff I wouldn't be able to do if I have resin down. All right, I'm just gonna go with that. Cool Now our high build I'm gonna start with the gold. My goodness Goopy is an understatement So I'm going to trail it around this bit But it got a little thicker right over on the other side, so I have to go back Okay, okay, okay, still no that's laying pretty Well, I'm happy with how that is going so far Not a whole lot of that left. So we're gonna do silver My outside of this Line of stones I'm just following the design that I kind of already set out with the What is it quartz? I don't know if you guys can see the texture like how high it's sitting up That's pretty sweet That dances sorry, I haven't been reading I'm trying to figure that wasn't a hint. I was just saying So I'm going to This high build is not playing Looks pretty fun in my opinion Okay, so I'm gonna save the other high builds For a moment and I'm gonna see what it what happens if I try to use it to like drop through the art coat layer That's what I have in my head At this juncture anyways Okay, so now I'm gonna mix up my dark turquoise mmm So funny like this How this is like I can't I can't see me doing it a geode in general or yeah I guess I just I don't I just don't know how You see it Without all the color I think it's kind of like how when you draw hair I Can't I can't wrap my head around how it works like I do big parts first like I do like the bulk of it and then going Little stuff you're doing little stuff Libby Cuz I need to do better about promoting the channel. I sure can sue. I'm so sorry I keep Not forgetting but getting sidetracked Hi Jeff. Thanks skull in that stuff Okay Considerably thinner this white and then we're gonna need some blue moon It's from resin art What's going on need anything shippable and confused? Oh, I appreciate that Libby. I appreciate every single one of you guys Also, if I keep hitting that Camera with my head. I'm sorry So this one's called blue moon. I Love this color, and I wish that I would remember to use it and more things Like they're not like super tight like on me I Like a tighter glove I need a Turquoise luster Yeah, you talk to them. I got to grab a color then what happened Ocean piece basically Goopy goopy. Why can't we just let that dry like that just to see Why like I wish you could stay up. Oh good. It would sink. It's still sinking Maybe if we dropped it into high build but High build not that clear You know say be you know say this is turquoise luster from just resin That's so awesome Sue before you're all the nine-year-old one Hot tubs are fun Okay Color application Let's do it First color on the thing and my reference is a deep blue. So we're gonna go with Yeah I'm not filling it all the way in because I'm gonna go in and use my hands to Kind of manipulate the color around That looks like the next place that this is The reference is after the median stones I'm just going to spread this about I'm just gonna push it up to The gold and I don't think it will really invade the gold Because the gold is so much thicker But you never know it's a test Never know till you know Like that up. I'm just kind of manipulating the resin into the Shapes that I want it to be That didn't pour out exactly how I Envisioned it. So I'm just using my hand to do what I Needed the resin to do on its own There all that will fill in Nicely do the same up here Just push it up to the high build Sorry you guys this takes more Mental capacity than I have available To um be able to read talk and do this so just two seconds Just two quick Seconds there is no I'm filling it in with my hand instead of just pouring more resin it's because Your resin is only gonna want to stay to an eighth inch And when you pour resin out it pours out at More Than an eighth inch So it's gonna want a self-level and to be able to control that I have to thin it With my hand instead of just pouring it all out Okay Next I'm going to do a high build white line Down here. It's starting to get warm. So I think we're coming to the max capacity of The pot life for high build Then there's a thick line of dark turquoise So far it seems like the high build is a great Median color What do you guys think? I think I wish I had enough gold left To do another line. Maybe I do We'll find out in just a moment This sets properly then I'm all about having high build as Kind of a buffer between my other Resins I don't see any reason why it wouldn't set up properly But you never know, you know All right high build now I'm gonna drop this high build into this other color With art resin Nope art coat. I haven't said art resin in a long time. I'm gonna see if it sinks right away Or if it floats if it makes a difference I didn't think this string would make it all the way around but now I think it may Also, just because I said that it'll probably not Nice, okay So it's thicker on one side than the other. So I'm just gonna double this line a little bit This is kind of the consistency that I look for when I do pull lines of color So the fact that it's just comes in that consistency is kind of great Could have been bad All right next Gonna use the turquoise luster up here fill that in cool cool a little bit low on the Blue moon down here and also here and also here Okay, pushing it up just like before I think it's gonna look pretty good I could be biased. Is that possible to be biased when you're the artist? because isn't usually the artist the most Critical of their own work, I could be wrong Let's push this up Then I'm gonna drop a white line through this of the high build if I've got the working time Definitely gonna have to mix and batches for the large geode the actual geodes gonna be seven feet And I won't if that's the working time of high build then I'll have to have many hands helping Claire and vamp. What's up? Also just hold any questions till a little bit later in the show So that I can Get to them not miss them because right now. I'm just gonna miss them if you ask something I'm gonna have to pour a little bit more on that side. I Specifically didn't pour a high build line in between each color Because I want some of the colors to interact with each other And the high build doesn't look like it's gonna Really dance with anybody Had a drop on the outside of where I wanted that color Nvd, I think I'm gonna put a line of this color this side of the silver May regret it, but yellow in the reference image the client gave me there It's mostly thick lines of color Not very many of the little Then ones that people usually draw on with Posca, but that will still be added to the final Peace for sure Loving it so far. What do you guys think? Sure Evelyn. I'll show you how high it is once again. Hey, Carolyn. Nice to see you. No problem So I haven't hit it with any heat yet. So there's a few bubbles. You can see a height difference between the high build lines and The standard resin So this dark line is high build Silver's high build The goal that I dropped into the dark turquoise is high build the white is high build and this gold is high build I'm not sure how heavy it'll be when I'm finished the actual geo that the seven foot one will be made of foam The substrate will be made of foam so that we can Hopefully control how heavy the piece gets Ultimately, I'm just gonna go ahead and add this dark on the outside edge Because it will end up being the dark turquoise color So I have a couple more areas to fill in then we get to discuss the possibility and placement of Glitter Okey-dokey I guess I could just go ahead and fill in this whole section with the white I'm just gonna scooch it up to the high build and it'll fill in on its own Looks like I'm gonna bring some of the dark turquoise into the white since I Accidentally just mix that in but that's fine There's no real mistakes when you're doing Resin art in my opinion, but hey, that's just my opinion. Yeah, I'll end up blending those Colors out into each other You're a little bit more white over here, don't I right then I'll manipulate those colors into each other now I'm gonna put something here Maybe white and then some more gold All right, let's sit with some heat and see where we're at So what high build is is just a really thick resin That's really fast as well. So You got to move pretty quickly when you use it I want to add too much heat. I don't want to melt everything. Oh so Okay, now we have all of this. I still have some Moveability with my high build I'm gonna take some of this white and put it somewhere This is straight up marshmallow fluff at this point I'm gonna put it Through here I'm trying to lay it in the areas that I want it and then stretch it probably also Well, it's gonna be a big bit. It's fine Geo's are not perfect Hit it with a little heat when it starts to flow a little flow Actually while I have this Gonna reshape this bit. I need to pull a line From the other direction This is almost like trying to work with real stringy hot glue. We're gonna make it look awesome I like that I can pick it up and re Place it put in a little bit of heat so I can Whoops I wanted to do and now we just have to connect those two lines Sounds easy enough and theory So I will say work with the high build until it's Not workable anymore, this is Difficult difficult task after it's already started to set up fix that and then put that Couple resin to bed That was not easy. All right Now The dark turquoise seems a little bit more workable, but I think I have enough dark turquoise in The piece the silver seems like it's still a bit workable. I'm gonna add another line of it somewhere Think I'm gonna put one right here it seems that even though it's what I would consider heavier because it's Solidifying faster. It's still floating For example on top of the gold. Nope on top of the green over here where we added the gold high build It's still very visible So I think that's very awesome and I want to pull one next to this white I need to catch that Dribble it's my opinion that instead of hiding flaws sometimes you just need to highlight the flaws like that Unfortunate blob over here. I know I can finish this line. I'm gonna finish this line Make it look good. I'm trying to put the High build higher on this stick so that as it comes down Less likely to blob Nobody heat as we go Keep it fluid if you guys do this at home careful not to burn yourself Done with that. Got some gold left But I'm gonna amend this outside edge before we do anything with the rest of that gold Give it a little bit of texture out here Nice nice witty witty nice Okay, now I need to do something with this gold Where should I add another line of gold has to be out here somewhere? maybe on the inside of the This so I'm kind of trying to roll the gold up onto the stick So that it is less likely to blob just like as before I'll put a little bit of heat. I'm not just keeping the heat on it. I'm Heating it enough just to make it come Come down and then Taking the heat away I need more more pigments, so You could probably also just put heat in your mixing cup. I'm gonna start from the other side this time Also, I'm not heating the stream of resin that's coming down I'm heating up the resin that's on the stick So if you heat the stream of resin that's coming off of the stick Then it's more likely to break kind of like that Just a little bit more. Come on people stand a little a little bit Just a little bit more Come on now gold You don't have to travel that far Good enough people good Enough you know looks pretty good. What do you guys think? What's up Shane? I'm gonna put a little line of teal It's on inside of this To bring some of the bright colors down Just following the line that I already have drawn out bless you I'm just going over the line I have already got until my resin breaks So I don't have to risk a drip I'm loving this. What do you guys think? I'm able to do in what it's supposed to Also, since I'm mixing the two kinds of resin in the same piece they're Kind of reacting and making some interesting texture Nope design That's Looking good right Next thing is something glitter Next thing is glitter So I have some clear left But I think I'm going to do the glitter out of the high build. So I'm just going to drizzle this clear Into my glass And this will help it to stay Stay put and also I will 100 percent Be dropping fire glass on it and fire glass has to stick to something. Nope Glitter glass has stick to something so that's also Why I put resin on top of my fire glass dual purpose situation Next I'm going to make some high build And then we'll be almost done with this sample piece. I think these colors are great I think the client is going to love them I think high build is going to work out really nicely for what I need it to What do you guys think so far? I need to know I'm just wiping off my stir stick so I could reuse it to do The next high build mixture What is the purpose of the high build? So the high build Is helping some colors stay to themselves It's creating a barrier between Some of my pigments you can see the higher sitting resin like this dark line here The white the gold for example Those are all high builds Look that white line is probably one of the first things we added and it's Doing what The packaging says it's going to stay where you put it All right, let's make some A little bit more high build and do some glitter And class will be dismissed Turn up. Okay. I've got my glitter glass right Meow Whoops, I'm just going to mix a little bit of high build Over here on the side. I don't know if you guys can see what I'm doing So high build comes in these little tubs that aren't the easiest to control Control and it is what it is. You know what I mean? Jelly beans, uh, I'm just eyeballing this measurement Let's mix this up Which high build wasn't so cloudy Feel like you could do some awesome things with it But you'd be able to do more awesome things with it if It were to get clear But whatever thickening agent is in it is going to keep it with kind of milky color Bamp the next skull you do you should use high build If you're using resin on any surface that is vertical or has It's anything but perfectly level High build would probably be a good option Because it's less likely to run all the way off Of your surface like if it's rounded for example However, keep in mind It doesn't self level because it's designed not to move from where you put it so Yeah So what all are you guys working on today? I will be working on emails and orders Because I live an exciting life. I'm interested to see how well You can see my glitter in this high build since it is Kind of cloudy Packing up your house. I forgot you're removing Swamp for your still at work. I'm sorry Hopefully it will be an easy and fun and quick day at work Anyone else thumbs catch a cramp when you're mixing resin Quoting jobs. That's not fun Shane a resin bowl. That sounds fun Too humid It is a very hot day here in Dallas. I'm just about over mixing this resin I'm going to put a little bit to the side just in case I need to make A little bit of another color Now for the glitter The glitter I'm using for this project today is going to be a combination No Not even that I was going to mix some of this chameleon flake From color obsessions series one number 10 it goes from green to blue to purple But I think I'm just going to use this on the turquoise tea chameleon. It's the same colors But this is kind of a smaller more irregular flake as opposed to his little varying dots so My goodness. I love glitter It's probably Probably considered an obsession. That'd be fair Also, just like powders. I overload my glitters Don't judge me. It's going to be a super thick Goopy situation So it seems like it's a little bit clouded But also I think a lot of that's air from mixing everything and once Once I hit it with some heat It should be fine Okay in the reference the glitter is over the stones in the midsection at the very least that I'm going to put some A little bit further out as well I'm going to try to put a thin line The outside of this dark line High build is hard to pour anyways because it's so thick But when you have an irregular shaped glitter in it It is even more difficult Just a heads up for anyone at home wondering Not easy Let's see if I can just spread that to match the rest of the line I think high build is pretty great for Geodes and blob pieces If you do blob That there has to be another name for that kind of artwork. I feel like it's nicer than the term blob But it could be wrong. I'm not talking while I'm thinking Sometimes I can do it other times not even Not even an option All right, let's hit with some heat and see if the bubbles pop some It pops some but I don't think I I think I'm going to make some regular resin You want to make some regular resin? Um To do this part because it is just a little bit too cloudy still So maybe I wouldn't use it for glitters just opaque pigments I'm mixing some more gold though with the rest of it with the rest of the high build that we have Really wanted that glitter high build to work, but it is what it is I'll give you guys a close-up of what it looks like in just a moment I'm trying to mix this gold into the high build without risking it Huffing gold dust everywhere Okay Looks like you still got a little bit of gold dust, but that's fine I'm putting this line just onto the stones as dictated by the reference So when a client gives you a reference of a piece I always when I except commissions Ask for a reference of something that the client likes or what is it that inspired them to ask for a Commission of a specific piece There's always something that they've seen that Makes them contact you whether it's your own work or They saw another piece maybe on Pinterest or Instagram or even tiktok now and um When they send me reference pieces. I usually will try to do one sample piece Based on the reference and then I'll do My interpretation of the sample For the reference that was sent This particular piece is the one that's based More closely off of the reference that was sent to me Should I put gold in the glass area? What do you guys think? spray paint gold or resin gold? Yeah I think you're right okay that aside with this little cough syrup type cup Which is not going to be enough so never mind with that we're going to do Drop in everything over here. What did I use art coat? Okay, just real quick his eyeballing it again because I don't have any More a little measuring cups Smallest on average now is 10 ounces which would be entirely too much Sorry, I had to change our plan as I'm going But sometimes Kind of just got to play it by ear You guys ever worked on a project and had a definitive way you intended on doing it and then Part of the way through you realize that's not gonna work and you have to like pivot Happens to be on almost every piece Which is fine. I think it's important to be able to adapt Personally So do you guys have any questions that I missed so far while I'm mixing this? I'm sure I've missed something. So what remind you of the game by Rotex days? also, let me show you what the high build With the glitter looked like Kind of cloudy, huh the working time It seemed like it was about 20 minutes give or take a couple minutes Not a lot more than quick coat Less than A standard craft resin Oh putting resin in two cups and combining right that was very Very much a throwback move For those of you guys that are new to the channel Back in the day when we were just starting out We're just a baby youtube channel We would Not use a graduated mixing cups We would just eyeball it and two other cups Right to issue you totally pipe it would be a lot easier to pipe it rather than Uh my ways that I did on this one or I guess you could probably even use a syringe I've piped resin before it it would definitely be easier than what I just did Okay, let's get some glitter Just like before I'm just going to pour a little bit of this inside just in case we decide we need to do something else I always like to have a little bit of clear resin reserved for I can't say emergencies but for Just other things If you love glitter raise your hand If you love chameleon glitter Raise two hands Don't drop your phone on your face though I've done that Not fun Oh, yeah for sure tish. Ooh Perfect. Okay Looks much better Than the high build Glitter That we put on earlier It just doesn't have the clarity that a clear Or regular resin does Keep that in mind. Uh-oh had a breach I'll have to make that a choice in a minute a couple of breaches. Okay A little heat to pop the bubbles Good to go Now I asked you guys about adding gold around the Fireglass that I had and you guys said do uh liquid gold instead of The high build gold. So that's what it will do This is the gold that I use I be What do you think of my this? I'm pouring it uh the liquid gold on the back of this Uh cup because I need some of the propellant to soak in You could tell that there's propellant because when I start like this the gold Pigment the spray paint that kind of separates And you can see the darker area the darker area is the propellant and so I'm just Letting that soak in a little bit if I don't Do it this way The gold will kind of grow and Not do what I want it to do. However kind of looks like My resin set enough to where I don't have to really worry about that I need a pipette So I need to go get a pipette. Are you talking to me? I didn't hear No, apparently the internet would down on the computer or else I would have had it I would have had it up I'm just gonna use a pipette I think This is the gold that was separated I'm gonna go get another gold Anytime you use this kind of gold make sure you shake it up really well because it separates like immediately I'm trying to kind of skim off the top Yeah, it's not really displaying What is it that I what's the word I usually use? so typically I let the propellant soak out of the The gold before I apply it because it'll kind of Super A little bit of an explosion there, but we'll make it a choice It'll kind of break and starburst out So I try to let the propellant soak up enough Just just breathe. That's good boy. Just breathe relax So I try to let the propellant Soak out However, since this resin is kind of more set It's not really a concern. It's not going to splay and starfish out I'm gonna kind of design how this blob looks. However, it's not white The high build Oh, it looks like it's like speaking up That white is high build. Yeah, that's what I meant. Oh, I thought you were talking about the white that I'm working in right now So I have this splatter here I'm gonna try to figure out how to make it a choice So I don't even know how it's splattered when It's not doing it now So i'm just adding a couple little It's like when there's a little bit more detail in Like a big part of where it's just playing Mm-hmm anybody who knows my work knows that there's some kind of splatter even if I meant to or didn't meant to So cool. Love it now last thing glitter glass High pressure for when you're beautiful. I love you. Go lay down Just need to fix this uh breach right here Just gonna blend that down a little bit In the areas where we kind of broke over that thinner High build line cool Next and final step that we're doing on this piece today is glitter glass. This is One of my favorite things to use I'm almost any medium. It's very fine little tea tiny shards glass, let me turn on my Light So it's when you want something sparkly But want to avoid looking like crafty because sometimes glitter can look a little crafty This is what I use it's clear It's elegant And it really really sparkles So that's what I'm going to put on my this to give it extra bling extra eye catching So I have the big shards of fire glass Already down and that creates the texture that I'm looking for and then the fire glass Gives that elegant sparkle. You can't even see the fire glass on it But when the light hits it, you can really tell that it's there If you get some of this glitter glass, it's beautiful, but it will hurt you If you're not careful, ultimately it is still glass. So Still have cautions. I have given myself a couple paper cuts With this super fine glass. It is not a good time I'm gonna put some over The this as well Because in my opinion, you can never have too much glitter glass Glitter is always an option Even if it's just glass I'm being really careful about how much I kind of work the glass in between my fingers On top of the fact that I don't want to get cut If you're a little bit too reckless with it, you'll get glass pinging out in all directions And it'll land in your other resin And you'll be able to see that it's there. So you'll have to pick it out. It's a whole big thing. So just Take your time when you add your glitter glass Or just go buck wild with it because Nothing's perfect in nature including geodes And if one decides it's gonna like ping out and Lay in an area that doesn't have texture then So be it Nothing's perfect So this part's still kind of goofy. I wonder You kind of make it look a little bit better with some glitter glass We'll see should have probably heated this bit up with A little bit of heat. Well, of course, if you're gonna heat it up, you're gonna use heat But just to make sure that it's sticky enough to hold on to this glitter glass This jar is a 20 gram jar if you're on my website I sell it From 10 grams all the way up to a pound depending on how much You use it It should last you a little bit I'm very heavy-handed with all things glittery and even if it's glass so I'll probably go through at least 10 grams on this piece One second. I'm going to give you guys an up close of the finish Finished ish piece I'm sure after it sets and I give my eyes a break from The piece and look at it tomorrow. I'll have other ideas of things. I want to add to it or change or whatever Pretty sure. I'm not the only one that does that I could be wrong Who knows? Okay, that was about 10 grams all right Sorry for the movement. I have another light. I can use Trying to clean. There we go You're cleaning it with your finger I'm gonna one second voila cool, so We had an explosion of gold It's where we had a couple little breaches I should have made that silver a higher I think that the clients probably may be hopefully gonna love it So you can also see the varying heights where there's High build So this glitter line is high build Along with this dark turquoise line There were some rocks under here, but also the glitter is high build The white is high build The gold here is also high build and this gold and that's over Let's see how it's So that's regular resin Regular resin that's high build High build both these are high build high build Regular resin this teal here, but the gold is high build so you can see how it creates a higher texture Anyways, thank you guys so super much for watching. Hey Shane. What's up? um If you try this Tag us so we can see Yes, big boy. Come here. I'll hold you. Come here. I'll let you guys know what client says of the sample and Yeah We'll see you guys tomorrow. I'll be kind of one another. You never know what someone may be going through And always remember We do the tests so you don't have to You guys are amazing. We love you so so much Thank you for helping us grow our channel. We'll see you guys tomorrow at 6 p.m. Central Have an awesome awesome day Till then bye But we did you say bye Moomai, did you say bye? We're gonna go outside. Don't we just go outside? Now you still want to go now go outside? Okay, let's go Let's go. Let's go