 So we're here at the Mara Connect, and who are you? Hi, I'm Adon Lachinsky from Gang concept in Germany, and we're here presenting with a lecture bit this automotive demonstration. So what are you showing here? Can you come close to the mic? Now for the presentation of the mic. This is a standard Ramazaz R3 development board, but this is very similar to what is actually being used in production. And what we're running here is our FROV hypervisor, which is running 2PM. And 1PM is running cluster system, and the other one is running the IVI system. And they're both running in the same system here. The hypervisor ensures that the voice are isolated, and that they are basically running independently of each other, but on the same hardware, which gives a benefit in the sense that you just need one system, and instead of two, as previously. So what is this, Ramazaz R3 car 3H3 platform? Well, this is our arm raised cluster system. Can you come closer? There are eight courses in there, so four A53s and four A57s, and there's an additional two analog step R7 board in here. So the R7 is typically used for all these safety related things. You run your RTOS on, and on the Cortex-A, you run the hypervisor, and the Linux or the virtual machines you need for your setup. So it's a CPU-GPU virtualization. Which part of the Naro do you work with? So regarding graphic virtualization, there's also imagination for the art graphics in here, and that supports hardware virtualization, or hardware-based graphics virtualization, and that's what we're using here, so that both VMs have access to the graphics card and can do a very performant graphics output. And are you based in Germany? We are both based in Germany, yeah. So ElectroBit is a German company, and we as well.