 That took me three hours and 20 minutes to get here. It's not bad, I had pretty good weather. Although I'm looking forward to some faster times. Oh yeah, that was a pretty full boat. Let's get our butts out of here. We're in order to dishwasher. I'm not excited about that, but that goes to her house anyway. Why would you use dishwasher? I don't know, I guess people like dishwasher. Some metal working tools, like a pipe bender. That's a pipe bender right there. And a sheet metal bender, otherwise known as a brake on the bottom there. And a bunch of big batteries, and some other tooly things and bits and parts. I don't even know what all this stuff is. I know what some of it is. I know what enough of it is to be excited. Focus on making progress here. Oh, there was some serious wind back there. I had to take an unusual route to not get stuck in some heavy waves. It took a little longer, but it's all calm between these little islands. Oh, it's like Christmas, so much stuff. I am gonna get into this tomorrow. Right now, I need to eat. Oh, okay, some big yellow chairs. So these are from Z-Box. Well actually, okay, here's the story about these chairs. I put two of these on my Amazon wish list, and some guy writes me an email saying, hey, I got this Z-Box company to agree to send you a chair for free if I buy one for you. So I'm gonna send you two chairs, okay? And I was like, sweet! So, yeah, send me these two chairs. And these are going on the Tiger Shark Slicer. This is a piece of nitrome wire, 10 gauge, to make big resistors for a speed control. A super simple caveman speed metal wire. Ha ha, so much stuff in there, what does the note say? No personalized note, but just, someone asked me to put this on my Amazon wish list, because I recently went to the hospital after cutting the crap out of my arm. Got nine stitches, and I didn't have any band-aid or anything, and dude was like, hey, put a first aid kit on your Amazon wish list, please, and then he got it for me. Beauty, what have you got in here? The contractor's first aid kit. And it's got some stuff, it's got some band-aids. Oh, there we go, band-aids. Oh, and antiseptic wipes. Yep, looks good. Oh, it's got a cold, instant cold pack too. Oh, I can use that right now, it's been hot. I need to figure out where to put this. Right now, I'm just gonna put it in. Okay, this is the charge controller for the Tiger Shark Slicer. Yeah, I'll get into that more in the, in the post-video, so I'm not gonna get into it right now. Oh, 50 cutting wheels for Angle Grinder, otherwise known as Sparks Off. And these are Inox special. Inox being stainless steel. And someone asked me a little while ago, actually, what kind of cutting wheels I was using when I cut through some aluminum and aluminum. And it was stainless steel ones, stainless steel cutting wheels. So these are blocking diodes. And I don't need, need a hundred. They come in packs of 20. And if you buy one pack of 20, here we go, some diodes, nice. Never gonna need diodes again. That's great. Yeah, I don't. Okay, so you know how on Amazon, there's free shipping if you buy over like $25, I think it is, something like that. So I added five boxes of diodes, 20 packs to get it over $25, just in case someone was like, hey, I don't want to send this to you. And someone did totally send all these to me. And he sent all five. So it would not have the shipping, so it would be free shipping. Yeah, I don't make a lot of money doing the YouTube stuff, doing the videos. But you guys hooked me up with all these bits and pieces and parts and pieces for the projects that I do. So it ends up working out pretty well. Oh, okay. This one I bought myself. It's just borax. It still feels, when I, okay, I got this on. All the stuff is from Amazon. But when I was looking at the, what's it called? The ratings, the reviews for this stuff. A lot of people complained that theirs was solid. But this just appears to be powdery, which is great. Oh yeah, so what am I gonna do with this? I'm going to dissolve it in water. I have a little piece of paper with the instructions for this written down, which I got off the internet. But dissolve it in water and then spray it on wood and it keeps termites, fungus, whatever. It keeps things from growing in the wood. So I got a four pack. I should be able to do a lot of wood with that. Oh okay, this is the charge controller for, oh no wait, you know what? That other charge controller I had, that one is for the zombie chopper. This one is for the tiger shark slicer. Yeah, I have two boats, two charge controllers. The other one is MPPT, which I need. I'll get into that in the boat videos. Right, over there, and what's in this box? Oh, I know what this is. It's an inverter. You know, kind of a, I'm not sure where this is gonna go. Yeah, I could put it on, I'm probably gonna put it on the tiger shark slicer because that boat's gonna have a huge power source. And this is only a 500 watt inverter if I'm right, if I remember right. Yeah, 500 volt amps, which is what, 500 watts. Let's take a look. Now, Victron is supposed to be really good quality. I've never had Victron stuff before. But, you know, people on the internet say it's really good. They're more expensive than the Chinese stuff, but if it works, it's amazingly and lasts. I guess that's the thing I really care about. I care about how long it's gonna last. And supposedly these things are supposed to last a pretty long time. It has a plastic case, which I can't say excites me. But, we'll see. Hopefully, you know, it works for a long time. Yeah, I think I'll, I'll probably put that on the boat since the boat will have two huge batteries and a bunch of solar panels charging and all that stuff. I'm just making a mess now. Okay, these three boxes are big batteries and I'm, I already know what they are. I'm not gonna open them right now because they're for boats and I'm gonna open them on the boat videos. And, okay, am I saving the best for last? I got two metalworking tools that you guys sent me. Oh, not all of you guys. So this is from Kaka. She's the weirdest name. Did they not realize that Kaka means poop? Anyway, K-A-K-A. I have a Kaka sheet metal cutter, which I like a lot. So I went with them again for a pipe bender. So this is a pipe bender. It's got all the pieces in here. Yeah, it looks pretty good. I don't know. I'm gonna have to take it out and put it all together later. But that's really exciting to have a pipe bender because I have hundreds of pipes. I have a hundred of Vs and then a whole bunch of other different sized pipes and now I will be able to bend them. This is very exciting. Well, it's exciting for me anyway. And then I got another piece of sheet metal or another piece of metalworking stuff. This is a sheet metal bender. I can just pull out right now. Okay, that's pretty simple. Actually, I don't wanna pull it out yet. Oh, maybe. All right, let's just pull it out. Oh, no, I don't wanna get it all out yet. Anyway, it's just a sheet metal bender, am I right? I don't know what it's like, but that'll... I'll have to get this out in another video. All right, so sheet metal bender, pipe bender and a bunch of stuff for my boats. And I'm gonna see if I can put some of these batteries in a boat today. And I have a mess, okay. Well, that's okay. Once I start putting things together, all the stuff's gonna go other places. So, yeah. Oh, what do I do first? Oh, I think I wanna work on the tiger shark slicer. But what do I do first? Put the batteries in or the chairs, the seats. Oh, man, the seats are gonna be amazing. We're getting, I don't know, oh my God.