Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Feb 14, 2014
1. Disconnect the power supply from the outlet. 2. Disconnect the hose from the water outlet and drain the water from the washing machine to the low receptacle, eg bowls, 3. We bring the washing machine to ourselves and lean against the back of the washing machine against the wall, 4. Unscrew the filter with the front of the hand or the key and look for a slider, a piece of clothing, a shoe, a clip, which blocks the blades of the water pump motor. We check very carefully !, 99% of problems with not pumping out water or not spinning the drum is caused by clogging of the pump by some element such as coin or hairpin. 5. After pulling out the element that blocks the pump from the filter, turn the filter off, put the washing machine on the 4 legs, drain the water from the washing machine securely, where the water is to be drained, run the washing machine and ready :) should work in the worst case You may need to look for a fuse in the washing machine that is responsible for the pump operation (if one exists), or replace the pump, that is, the blade element and the filter cap, usually down the front of the washing machine. To buy in the stores with parts for automatic washing machines.